Question about 1991 Dodge Colt

1 Answer

I have a 89 dodge colt the hazards work but the blinkers don't work. Any and all help ill be freatful

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

What i would do is get hold of the owners manual and find out where the fuse blocks are located. of course if you do not have a manual you can buy one on ebay or just root around under the dash until you find it. It is a small car and there are just not that many places to hide it. Usually a small one under the hood with a few large amperage fuses and another inside with several lower amperage fuses. Generally there are two flasher units plugged into the fuse block, one for emergency lights and the other for turn signals. When you find it just swap the flasher units. If your situation is now reversed in that you have turn signals but no flashers then you have solved your problem. if your situation is the same, then you do not have a flasher problem, and your next suspect item is the turn signal switch
which is no doubt located under the steering wheel.

Posted on Nov 09, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I just had my 1991 dodge dynasty blinker relay replace but still have no blinkers. Hazard lights work and headlights and brake lights work just have no blinkers. Can any one help me with this?

either a fault on the stalk switch but i suspect the hazard light switch has a bad connection insdie the switch this is the most common fault i come across

Oct 02, 2013 | 1991 Dodge Dynasty

1 Answer

Hazards, blinkers and brake lights do not work.

all this is controlled by a fuse, i can't remember if it's in the dash by the driver door or under the hood

May 05, 2010 | 2001 Dodge Ram 3500 Truck

2 Answers

My left break and blinker light don't turn on. I have a 2003 dodge neon. can this be a fuse and if it is which one is it?

If the left front light works,then you don't need a fuse you need a bulb for the left rear light.

Oct 22, 2009 | Dodge Neon Cars & Trucks

2 Answers

96 Dodge Grand Caravan. blinkers not working

check the fuse and relay that control the blinkers, also check all bulbs make sure they are good

Jul 30, 2009 | 2000 Volkswagen Beetle

1 Answer

Flashers out, module, relay

More than likely to be a flasher relay. If you can locate the relay turn the harzards on and tap the relay with the ennd of a screewdriver. If the hazards start to work for a moment when being hit you know its the relay. If it was a module i would of thourght you would have more electrical problems as modern cars are mutiplexed meaning one module controls lots of different things. hope this helps.

Jun 01, 2009 | 2000 Dodge Stratus

1 Answer

Blinkers and Hazards Stopped working

Signal flasher in fuse panel black and square the one on the right is signal

Jan 26, 2009 | 1998 Dodge Neon

2 Answers

1989 Dodge Spirit blinker problems

another flasher unit is dedicated to the signals ..find and replace that one

Jan 14, 2009 | 1989 Dodge Spirit

1 Answer

2007 dodge ram blinker arm

Disconnect battery for 5- 10 min. remove trim panel @ steering column behind steering wheel, remove air bag, steering wheel do not move clock spring tape if need to it will be a black round thing that connecters go to then remove clock spring then blinker arm

Nov 17, 2008 | 2005 Dodge Ram

Not finding what you are looking for?
1991 Dodge Colt Logo

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides