Question about 1998 Chevrolet S-10 Pickup

2 Answers

How do I expose the timing on a 2001 s10 with the 2.2 engine and reset it to fix if needed

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 835 Answers

2.2 has distributorless ignition system . it has coil packs (2) of them -crankshaft sensor-ignition module-pcm. timing setting camshaft dot down - crank shaft dot up when number 1 is on compression stroke

Posted on Nov 09, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 5,763 Answers

There is no adjusting the timing, it has a fixed distributor and some dont use distributors anymore, the timing is computer controlled, whatever problem you are having is not an adustment, the computer does all the adjusting when needed, what you first need to do is have the computer scanned for any codes, if there are codes the codes will tell you what part of a system is failing or failed also a datastream check with a scan tool can also help, this reads all the data that the computers sees and the tech can see if some reading is off specs. good luck hope this helps.

Posted on Nov 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Reset service light 2001 yukon


the answers above do not work. batter cable off does not work. that turn on 5 pedal thing is BS. also some a holes online are saying undo the fuse cover under the steering wheel and and unplug the ECU - well the fuse panel is not under the wheel, it's on the drv side of the dash. AND even when you pull that there is nothing called a ecu. funny hu. there is not a ECU fuse in the under hood fuse box either. service engine soon light is STILL ON. It was flicked on from the air breather intake being loose. that has been fixed. gas caps on tight. engine oils been changed.

Mar 18, 2012 | 2001 GMC Yukon Denali

1 Answer

Ok, mom said the car just died. i looked under the hood and the rear valve cover had a large hole in it exposing the timing chain. i imagine the tensioner crapped. is the engine a interferance or is it...


The 2001 sebring always have these I belive it a pattern failure you are the 1000 person with this problem the cause the oil pump lost pressure if anything your engine top end has frozed so if you do just the timing you will end up doing the whole engine, you are better off replacing the engine you will only repair the problem and not the cause, look for a rebuilt engine with a good warranty . Its less expensive to replace the engine plus its faster and easier

May 09, 2011 | 2001 Chrysler Sebring

1 Answer

I need to replace the brake lights, how do the lenses,come off 2001 concorde


  • You don't remove any lenses or assemblies on this vehicle.

  1. Open the trunk.
  2. On the wall of the trunk sometimes the light sockets will be accessible without any further steps. Twist the socket to the left and pull the socket back exposing the bulb. Other times they may not be. At this point you will look for some butterfly nuts.
  3. Should there be some matting held down with butterfly nuts then follow the steps a little further.
  4. Remove the plastic nuts off of the surrounding area for the light you want to replace.
  5. Pull the matting back exposing the sockets.
  6. Twist the socket needed to replace and pull the socket out exposing the bulb.

Regards, Tony

Apr 29, 2011 | 2001 Chrysler Concorde

1 Answer

Where do you jump start a 2001 reg S class from. i have just brought one but cant get into the boot


Hi,
Jump starting means, connecting two cables to boost the power of your battery from another power source( another normal powered battery ).
You must look first for your battery, that is located in the engine compartment.
Connect a jump cables from the positive( + ) pole of your battery to another car w/ the same voltage of battery, connect another cable to negative( - ) pole of the another battery to your engine expose metal ground. DO NOT START YOUR ENGiNE/TURN ON. Let the other car start the engine, let it charge for 15 minutes.
Then, pull out the cables attach to your battery and to another. YOU MAY TURN YOUR ENGiNE and START the engine.
Hope that fixes your problem!
Thanks for using Fixya!

Dec 08, 2010 | 2001 Mercedes-Benz S-Class

2 Answers

I change the oil keep saying need oil change


on a 2001 gm i believe you turn the ingition to the run position with the engine off and with-in 3 seconds step on gas pedal 3 times all the way to the floor. the message center should reset and go off. turn key off and then start car. to see if reset.sometimes you have to go slow 3 times to floor with gas pedal.MAKE SURE ENGINE IS NOT RUNNING WHEN YOU DO THE RESET.

Aug 17, 2010 | 2001 Chevrolet Venture

1 Answer

My battery on my 2001 bmw 520i has an intermittent fault, it sometimes goes flat during the night. I can drive my car for a couple of days and it is fine and other times the battery is dead. I removed the...


Check the bulb under the engine hood. Sometimes the tilt switch goes band and the light stay's on from time to time since it's exposed to the out side. Hope that would help you.

Apr 07, 2009 | 2001 BMW 5 Series

1 Answer

Ford 2001 Focus Z tech 2.0 L Engine idle is too high.


yea you need to reset the timing r the timing belt is off by a couple teeth

Mar 01, 2009 | 2001 Ford Focus

3 Answers

2001 rodeo reduced power


I just went through this with my 2001 rodeo and the dealer needed to replace several parts over several weeks because they could not get the problem to go away.

-APP/throttle pos. sensor needs calibration/replacement
-air idle control needs replacing
-throttle body needs replacement
After months of going back and forth to the deal with the same problem, the throttle body was replaced last week and the problem has dissapeared....for now...

Jul 03, 2008 | 2001 Isuzu Rodeo

Not finding what you are looking for?
1998 Chevrolet S-10 Pickup Logo

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...