Question about 2007 Ford E-350 Super Duty Length XLT
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sure :while not hearing of any going bad on something that new(08)
ford allways has had a problem with door hinge pins wearing
and not allowing latch to line up hence it does'nt close tight and rattles
simple sat. day fix for you and a buddy
obtain new hinge bushings (brass) from NAPA
or other store have buddy raise edge of door tap out old bushings with pin punch and hammer ALL FOUR) tap in new ones use a plastic punch if possible to save dammage to new ones
take red crayon and put a line on top and bottom of latch pin shut door and open again What crayon line is missing
top line loosten bottom door hinge move up slightly tigthen bolts
Bottom line missing adjust bottom hinge down then repeat test
till both crayon lines are still there
door is now centered
it won't rattle now
closes easyier too
Posted on Apr 07, 2009
It is not the multifunction switch. The power feed goes thru the brake switch before the multi function. You have no power the the brake switch because your shift interlock is not allowing you to shift it. I'll look up the wiring diagram and repost with a solution.
Posted on Apr 25, 2009
Most fuse boxes are on or near the kick panel (left side of vehicle) under the steering wheel. Some (additional) fuse boxes are under the hood,
Posted on Apr 29, 2009
SOURCE: I need a fuse box
GO TO THIS LINK BELOW AND FOLLOW THE LINK FROM THERE TO YOUR OWNERS MANUAL WHICH CONTAINS THE FUSE DIAGRAM. IT IS FREE
Posted on May 04, 2009
The trailer wires are left turn, right turn, running lights(the smaller elements on both tail-lights and any side lights) and ground. Energise the corresponding lights and connect the wires accordingly. Find a good ground. A piercing test probe will find the correct wire for you if you can't track it to the bulb.
Posted on May 06, 2009
Tips for a great answer:
Aug 20, 2011 | 2005 Ford F 350 Super Duty
May 09, 2011 | 1999 Ford Expedition
Mar 04, 2011 | 2000 Ford F250 Super Duty Crew Cabs
Aug 10, 2017 | 2008 Ford F-350 Super Duty
Jul 20, 2010 | 2007 Ford E-350 Super Duty Length XLT
Apr 07, 2010 | 2006 Ford F 350 Super Duty
69 people viewed this question
Usually answered in minutes!