Question about Ford Laser

1 Answer

Where is the water pump on a Ford KJ Laser? - Laser Ford Cars & Trucks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 270 Answers

The water pump on the 92 Laser is easily replaced. You just need to untension the the belt driving the bump. Once you have done that all you need to do is undo the bolts and take the pump into your local auto parts dealer. Now that you have the pump install it and retension the belt.

U actually have to remove alternator belt and powersteering/a/c belts, then remove timing belt cover, remove timing belt adjuster, and slide timing belt off top pulley, making sure you mark it before removing it, so as to put it back in same position. Next, unbolt 2 bolts at bottom of water pump (this is a bit fiddly, but doable, then, undo water pump, replace with new water pump, being sure to use gasket cement, aswell as new gasket, which should be supplied with pump, then put it all back together, in reverse order of removal. Fill cooling system, check for leaks, and voila, u have done it :)

Check this at

Posted on Nov 09, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Will a 1996 kj 1.6 laser motor fit into a 1993 ford capri thanks

Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Jan 21, 2017 | Ford Cars & Trucks

1 Answer

How and where do I top up a kj 94 model ford laser transmission and clutch

No vehicle consumes any fluids
No need to top up anything
If you find ANY fluid low, you have
a leak to repair

Jul 23, 2013 | Cars & Trucks

1 Answer

Ford Kj Laser Auto gear changes **** the car while driving

if you know nothing about cars then I suggest taking it to a shop that specializes in transmissions. if you insist on doing it yourself, get a repair manual that covers your vehicle. should cover it.

Feb 01, 2013 | Ford Laser Cars & Trucks

2 Answers

My 1998 KJ Ford Laser drives fine but after you drive approx 15km's it starts to lose power badly

If this happens each time you drive it, check the fuel filter. It may be almost clogged and slow the fuel delivery. A other place to look would be the spark plug and coil wires. ( not sure what type to system your Laser would have.) The resistance in the Laser's plug and coil wires can increase as it warms up when it is driven. If the wires are over 5 years old they should be replaced.

Jun 03, 2012 | Ford Cars & Trucks

1 Answer

97 Ford laser kj problem , no power getting to alternator but can't find a fuse link anywhere , does anyone know the location please.

It in the engine fuse junction box it is the 100 amps. Listed as Main. Then you have a 30 amp listed as fuel injection.

Mar 09, 2012 | 1998 Ford Laser

1 Answer

Remove and install water pump on 1988 ford ke laser

You have to remove your belt ...and fan shroud then remove outer bolts off water pump housing take off replace with new water pump and GASKET, seal gasket with permatex before placing gasket in place then rebolt new water pump on and your golden.....make sure no dirt or debris gets in glad i can help ...

May 25, 2011 | Ford Laser Cars & Trucks

2 Answers

I need instructions on how to change timing belt on Ford laser 1995 KJ model please

it basically the same with the other long as you know what parts to remove. Just make sure that before you remove the belt/s and tensioner/, the timing marks are in the right place. I have changed timing belts without instructions...experience is needed though. I suggest better get a service manual to be sure if this is your first time.

Aug 10, 2009 | Ford Laser Cars & Trucks

1 Answer

How do i change fuel filter on a ford laser kj iii 1999

It is a clear plastic container like a small pill bottle on the fuel line. You just need to unclamp the old one and clamp the new one in place, making sure you fit it excatly the same as way as the old one. It should have an arrow on it.

Jul 06, 2009 | 2006 Ford Laser

1 Answer


just call autozone they will tell you

Jun 16, 2009 | Ford Laser Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

441 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers


Level 3 Expert

5495 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides