Question about Jeep Liberty

1 Answer

After removing caliper, what else do I have to do to remove the rotor? Maybe a couple more bolts?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

Once the caliper is off, the rotor should come off easily. No bolts etc. If not spray wd40 or other solvent into the stud openings and around the center hole, wait a bit and strike the flat area between the wheel studs with a hammer...(hard but not too hard) and the rotor should break free of any rust holding it on.

Posted on Nov 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Change front rotors on 97aurora


I hope you mean change front rotors, AND change front disc pads...This front brake set-up is fairly easy for a novice to do also. Why mention rotors? Are you experiencing a vaibration when applying the brake pedal? Yes, this is a sign of warped, worn out rotors...also inspect caliper piston movement, and top off brake reservoir after parts change. The caliper hold down bracket must be removed to change the rotors...2 bolts with good breaker bar, maybe 16 17mm socket and 13mm socket for removal of the caliper (2) bolts...lubricate and clean all parts and slide pins...be sure to thoroughly spray new rotors with brake parts cleaner before installing...this removes the packing oil from the rotors...(will ruin new brake pads and smell) Hope this helps.

Jan 21, 2013 | 1997 Oldsmobile Aurora

1 Answer

How can I change the rotors and brakes on a 2006 Cadillac?


Front brake
Step 1: Identify Front Disc Brake Components
brake_pads_rotor.jpg
Front Wheel Drive Brake Assembly
Most front disc brake components include: brake rotor, brake pads, brake caliper, caliper mount and brake flex hose. Brake service usual occurs between 20,000 and 40,000 miles depending on driver habits, road conditions and brake pad/ rotor materials used.
Step 2: Remove Brake Caliper to Replace Pads
brake_pad_set.jpg
Removing Brake Caliper Mounting Bolts
Locate primary caliper mounting bolts; apply wrench pressure counter-clockwise (When looking at the head of the bolt) to remove the bolts, upper and lower. Make sure the bolt threads are in good shape and replace if necessary.
Step 3: Remove Front Brake Caliper
remove_brake_caliper.jpg
Remove Front Brake Caliper
After removing the primary caliper mounting bolts lift the brake caliper off of the rotor and then tie or secure to the side, being careful not to bend or kink the brake caliper flex hose. Thoroughly inspect brake caliper and brake hoses for leakage, cracks or chaffing and replace as needed. Next remove the brake pads (If not mounted in the caliper) and secondary caliper mounting bolts. Notice how great protective gloves work, most technicians use them on the job today.
Step 4: Remove Brake Pads
remove_brake_pads.jpg
Remove Front Brake Pads
Once the brake pads have been removed, make sure if there is anti rattle hardware to transfer to the new brake pads. Some brake pad manufacturers will include the proper lube (Caliper slides) and anti-rattle hardware to ensure proper performance of their product.
Step 5: Remove Caliper Mount
remove_brake_pads_holder.jpg
Remove Caliper Mount Bracket
Finish removing secondary caliper mount bolts and remove caliper mount. Note: clean and lube caliper slides and pad friction surfaces of all foreign material or build-up.
Step 6: Remove Brake Rotor
brake_rotor.jpg
Remove Brake Rotor
With the caliper mount out of the way you can now remove the brake rotor. Sometimes it can get stuck so you may need to tap it with a hammer or use penetrating oil to free it up. Some manufacturers use small screws to hold the rotor on as well. Clean and inspect wheel studs, replace if any are damaged. Also clean bearing hub rotor mount surface to ensure the proper mounting of the new brake rotor. Inspect the ABS sensor wheel for cracks or damage and replace as needed.
Step 7: Depressing the Brake Caliper
compress_caliper.jpg
Resetting Brake Caliper
To install the new brake pads you must retract the brake caliper piston. Remove the master cylinder lid or open the brake caliper bleeder screw to allow excess brake fluid to be released if necessary. Install C clamp tool and gently tighten clamp until caliper piston is fully depressed. Note: use old brake pad to protect the caliper piston. Close the bleeders once the piston is retracted completely
Step 8: Installing New Brake Rotor
new_brake_rotor.jpg
Install Brake Rotor
Install new brake rotor, the new rotor is manufactured with a protective film over the rotor to keep it from rusting, remove protective film with brake cleaner before installing; also after the brake job is complete you may experience a small amount of smoke from the rotor when first used. This is normal and will go away after the first couple of uses.
Step 9: Installing New Front Brake Pads
new_brake_pads.jpg
Installing New Brake Pads
Reinstall the front brake caliper mount, and then install front brake pads. Make sure the pads are seated properly in the caliper mount; it must be a close fit to work properly..
Step 10: Reinstall Front Brake Caliper
front_brake_rotor_pads.jpg
Re-Install front Bake Caliper
Reinstall front brake caliper and reinstall caliper-mounting bolts, recheck all mounts and mounting bolts. Check the caliper slides to be sure there is no bind and that the caliper moves freely back and forth on the caliper slides. Bleed brake system per manufacturer's specifications to relieve any air trapped in the system. Before driving the vehicle, push the brake pedal down and let it up slowly, repeat until normal brake pedal operation resumes, this operation is forcing the brake pads to travel to the brake rotors.

Dec 18, 2010 | 2006 Cadillac STS

1 Answer

How do i replace the brakes and rotors on my 1998 Cadillac D'elegance?


This is not to bad, remove the wheel,then remove the caliper by removing the two bolts on the back, next remove the caliper bracket by removing the two rear bolts that hold it to spindle, then slide rotor off, you may have to hit center area of rotor with a hammer to break it free,now use an old pad placed against the caliper piston and use a c clamp to push piston all the way in,next is to clean caliper braket where pads sit apply a little lube to help pads slide and then reverse directions to put back together, heres a couple of diagrams to help,hope this helps.b1aeba7.jpg2b9a623.jpgc54fbe1.jpg

Apr 23, 2010 | 1998 Cadillac DeVille

1 Answer

How do I replace the front rotors on my truck it is a 4 wheel drive.


remove calipers, remove caliper brackets, pull rotors off. caliper bracker bolts will be very difficult to remove, use a long pull handle and maybe a little heat.

Mar 10, 2010 | Chevrolet 3500 Cars & Trucks

1 Answer

How to install front brake rotors for 2004 odyssy?


1. remove 2 bolts holding caliper on (either 12 or 14 mm)
2 remove 2 bolts holding caliper bracket (which holds the brake pads) (17mm)
3. remove the 2 phillips head bolt holding the rotor on
4 remove rotor, if rusted may need to tap it off
5 reverse procedure, when reinstalling caliper, may need to press piston back into caliper to get it to fit over new rotor

Feb 20, 2010 | 2004 Honda Odyssey

1 Answer

How do I remove the front rotors from my 1999 honda accord


Removal & Installation

d4d9fd4.gif
After removing the caliper body, unfasten the retaining bolts and remove the caliper mounting bracket, in order to remove the rotor

  1. Use a siphon or clean turkey baster to remove about half of the brake fluid from the master cylinder.
  2. Raise and safely support the vehicle and remove the tire/wheel assembly.
  3. Remove the caliper mounting bolts, then lift the caliper assembly away from the brake rotor.
  4. Use a suitable piece of wire to suspend the caliper assembly. This will prevent the weight of the caliper from being supported by the brake flex hose which will damage the hose.
  5. Once the caliper body and brake pads are removed, unfasten the caliper bracket mounting bolts, then remove the bracket from the rotor.
  6. Remove the rotor retaining screws.
  7. Remove the brake rotor by pulling it straight off the wheel mounting studs or if seized in place, remove the stubborn brake rotor by threading in two 8 x 1.25mm bolts, two turns at a time until the brake rotor is released.
To install:
  1. If necessary, completely retract the piston into the caliper using a large C-clamp or other suitable tool as provided in the front disc brake pad replacement procedures in this section.
  2. Install the brake rotor onto the wheel hub and tighten the mounting screws.
  3. Install the caliper mounting bracket and secure with the retaining bolts.
  4. Install the caliper and pad assembly over the brake rotor and mounting bracket and install the mounting bolts.
  5. Fill the master cylinder to the proper level with fresh brake fluid.
  6. Install the tire/wheel assembly and lower the vehicle.
  7. Pump the brake pedal until the brake pads are seated and a firm pedal is achieved before attempting to move the vehicle.
CAUTION Do not move the vehicle until a firm pedal is obtained.

  1. Road test the vehicle to check for proper brake operation.

Nov 01, 2009 | 1999 Honda Accord

1 Answer

How to replace front rotors on a 1989 190e mercedes?


Remove tyres. Remove brake pads.
Remove Brake calipers bolts from the back of calipers.
Put calipers aside without removing brake lines. Remove rotor bolts. Remove rotors. Install new rotors Make sure new rotors are clean from any grease that comes on it with petrol or any cleaning chemical for that purpose (no water) Install calipers Install new brake pads Good luck

Oct 20, 2009 | 1989 Mercedes-Benz 190

1 Answer

How to replace front rotors.


Rais and support Vehicle, Remove Wheels Remove 2 Small 10-13mm Bolts Holding Brake Caliper on Remove Caliper Use Large "C" Clamp to Push Caliper Piston IN ALL The Way . Then Look for 18mm Bolt that Holds Caliper On This is The Caliper AnkorRemove the bolts and there may Be Philips Head Screws Holding Rotor On if So Remove them then Remove Rotor. I Hope This Helps you

Jun 08, 2009 | 1994 Honda Accord

2 Answers

Removing front rotor


When you take off the wheel, you then need to take off the caliper witch is held on by 2 bolts, (may require a special socket) after removing caliper carefully let it hang by brake line. Then the rotor should slide right off.

May 20, 2009 | 2005 Subaru Baja

3 Answers

2006 subaru legacy remove front brake rotor


Hello, hope this info helps...(subytech1)...



REMOVAL
15-INCH TYPE

  1. Lift-up the vehicle, and remove the front wheels.
120334720


  1. Remove the caliper body and the support from housing, and suspend it from strut using a wire.
120334721


  1. Remove the disc rotor. NOTE: If the disc rotor seizes up within hub, drive the disc rotor out by pushing with an 8 mm bolt in holes B on the rotor.
  2. Clean mud and foreign particles from the caliper body assembly and the support. 16-INCH TYPE Refer to 15-inch type. 17-INCH TYPE Refer to 15-inch type.
INSTALLATION

  1. Install the disc rotor.
  2. Install the caliper body and the support to housing. Tightening torque: 80 Nm (8.2 kgf-m, 59 ft. lbs.)
  3. Install the front wheels.

Mar 27, 2009 | 2006 Subaru Impreza

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...