Question about 2005 Honda Pilot

1 Answer

How to remove the whole head lamp from honda pilot

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 270 Answers

The Honda Pilot is a mid-d sport utility vehicle introduced in 2003. The 2005 modelcame in three different types: the LX, EX and EX-L. In the center of theinterior roof is a dome light, or map light. All you need is a screwdriver to complete the job. Once removed, you can add new electronics to the Pilot'sroof.

1. Turn off the dome light and the car's engine. 2. Insert a flat headscrewdriver into the edge of the map light plastic cover. 3. Pry the cover off until itpops out of place. 4. Locate the two screws on theinside of the light mount and remove them with the screwdriver. 5. Remove the plastic domelight fixture to access the connector attached to the bulb. 6. Detach the connector fromthe dome light bulb. The dome light fixture can now be removed.
Hope this is what you are searching..

Posted on Nov 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i replace head light bulb to my honda pilot 2003


If you can reach it from behind you simply turn it and pull it out. Snap out the dead bulb and replace. If you can not physically get behind the lens then you need to remove the lens to gain access to your bulb. That is easy to do. There should be two or three bolts/screws holding the assembly in. Remove them and the lens will pull out. After pulling it out you can access your bulbs. Do no touch the surface of the new bulb on install. Your finger oils will shorten the life of the lamp

Oct 10, 2014 | 2003 Honda Pilot

1 Answer

How to remove transmission on honda pilot


In order to pull the transmission on a honda pilot it all comes out from the bottom. You must remove the front suspension all the engine harness, pipes and hoses unbolt the suspension subframe bolts and drop the whole thing at one time. Use a suspension lift designed for this or you could drop it and loose it.

May 02, 2014 | 2007 Honda Pilot

1 Answer

2010 honda pilot tail lights and license plate light not working


park (tail, running) lights
there are 20 lamps in side and outside, are all 20 dead>
those lamps that glow HL switch 1st click is PARK
side lamps. dash lamps glow in park are they?
this answer , solves the who is bad.

as always, check all fuses first in both boxes
there may be a park relay./
alldata.com has the full schematic, if really curious. ...

Jan 10, 2014 | 2004 Honda Civic

1 Answer

I have a broken side mirror on my 2009 Honda Pilot and need to replace it how do i remore the side mirror? Not the glass the whole thing.


You're lucky with this one, you do not have to remove the door panel to get the outside rear view mirror off.

Here's how do replace it: go here! just type this in search box,on pc. 2009 honda pilot outside mirror replacement. then click on first link, good-day !

Sep 20, 2011 | 2009 Honda Pilot

1 Answer

Honda Pilot 2004: We keep replacing headlights


Check that you have the right fuse for it. If it is too high of an amperage, it will pop the head lamp bulbs. Most are 20 amp. Check to see if someone placed higher ones and replace to oem specs.

Jan 06, 2011 | Honda Pilot Cars & Trucks

1 Answer

2003 Honda Pilot: Trying to replace brake light bulb. Lense housing does not come off after removal of two locking bolts.


Remove the 2 philips head screws, which are accessible when the tail gate is opened. There are 2 mounting tabs that hold it in place, wiggle the entire unit to remove it.

Nov 27, 2009 | 2003 Honda Pilot

1 Answer

I need instructions on how to remove/install headlight assembly on a 1990 civic ex 4 door


open the bonnet, unlock the latch for head lamp cover the and remove the head lamp cover and replace the head lamp.

Sep 18, 2009 | 1990 Honda Civic

1 Answer

How do i replace a sidelight on a grand cherokee '53


The whole head lamp assembly has to come out to replace the headlight bulb. Here's how to do it.
REMOVAL:
  1. Remove the jack screw attaching the top of the head lamp to the head lamp mounting module.
2. Grasp the upper inboard and lower outboard corners of the head lamp and pull the head lamp outward.

  1. Remove all of the bulb sockets from the head lamp module.
  2. Separate the head lamp from the vehicle
  3. INSTALLATION: CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.
  4. Install all of the bulb sockets in head lamp module.
  5. Position the head lamp on the vehicle and align the ball studs with the sockets.
  6. Push the head lamp inward to secure the ball studs with the sockets.
  7. Install the jack screw attaching the top of head lamp to the head lamp mounting module

Aug 17, 2009 | 2003 Jeep Grand Cherokee

1 Answer

Honda Pilot 2004 backup lamp broke by wayward garage door. How do I replace the backup lamp housing?


Hi,welcome to fix ya.
there are 2 screws under the ends of the lens heres the location 2e828e1.jpg

Apr 10, 2009 | 2004 Honda Pilot

2 Answers

How to change the whole headlight assembly on a 05 Honda CRV


You have to remove the front bumper and grill etc

There are 5 bolts holding the headlight assembly in place. 2 at the top and 3 underneath.

Remove the plastic cross piece by prising out the clips and then the grille clips too then unbolt the bolts eithr side under the wheel arch. The bumper is still fastened using cips. Pull the bumper forward to unclip.

Dec 23, 2008 | 2005 Honda CR-V

Not finding what you are looking for?
2005 Honda Pilot Logo

432 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...