Question about Nissan Hardbody

2 Answers

What is the Cylinder head bolt torque settings on a Nissan hardbody 2Litre KA20 engine

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Nissan Master
  • 22,326 Answers

Petrol engine with alloy head ,75lbs

Posted on Nov 09, 2010

  • winniec306 Nov 09, 2010

    we are working with a newton metre. and need to convert to newton metres - is that .75lbs foot or .75lbs inch? i cant find the info on the nissan website. many thanks

  • Colin Stickland
    Colin Stickland Nov 10, 2010

    dont rightly know to be honest so i will have a look in teh book for you ,i never use a torque wrench to be honest i just pull the bolts down till i feel the thread stretch ,now in my bible it says ka24 engine pick up and its showingtightne to 78 NM then slacken off 360% then retighten 25/34nm then tighten 80º ,well that seems a bit heavy winded ,what i do it to tighten with a speed key ,then rachet ,then my snap on bar and i pull them down till they feel right ,say alloy head petrol is less than a cast iron diesel head ,sorry i know i sound like a cowboy but after 40 yrs you just know what feels right .

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 141 Answers

90 nm should be more than sufficient

Posted on Jun 25, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need Cylinder head bolt torque settings 2004 1.8L Nissan Pulsar


Could need new head gasket. head bolts don't usually work them selves loose. torque should be 60 ft/lbs

Mar 19, 2018 | Nissan Cars & Trucks

1 Answer

Torque settings for Nissan na 20 cylinder head


I need the torgue settings for Nissan Hardbody NA20 engine
: Mains bearings, Big ends and flywheel as well as timing belt settings

Feb 11, 2013 | Cars & Trucks

3 Answers

Diagram ka20 cam timing nissan hardbody


need diagram for nissan ka20 camtiming

Jul 10, 2012 | Cars & Trucks

1 Answer

Nissan pe6 head torque


Main Cylinder head Bolts
all
step 1 = 88-98 Nm, 65-72 lb.ft

147 mm, 5.8 inch bolts
step 2 = 85-95°

119 mm, 4.7 inch bolts
step 2 = 70-80°

Cylinder head Sub Bolts
step 1 = 34 Nm, 25 lb.ft
step 2 = 44-54 Nm, 33-40 lb.ft

May 10, 2012 | Cars & Trucks

2 Answers

2002 nissan maxima 3.5 cylinder head torque


Hi there:

2_17_2012_6_58_18_pm.jpg

Fig. Cylinder head bolt loosening sequence - Altima & Maxima 3.5L engine

Install the cylinder head bolts and torque in sequence as follows:
  1. Step 1: 72 ft. lbs. (98 Nm).
  2. Step 2: Completely loosen all bolts.
  3. Step 3: 26-32 ft. lbs. (34-44 Nm).
  4. Step 4: plus 90-95 degrees clockwise.
  5. Step 5: plus 90-95 degrees clockwise.

2_17_2012_6_59_54_pm.jpg

Fig. Right cylinder head bolt torque sequence- Altima & Maxima 3.5L engine


2_17_2012_7_00_21_pm.jpg

Fig. Left cylinder head bolt torque sequence- Altima & Maxima 3.5L engine

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day

Feb 17, 2012 | Nissan Cars & Trucks

1 Answer

What is the valve clearance and head bolt torque on a nissan td27 engine 1996 model


valve clearance is .014 inch for intake and exhaust with engine warm.
head torque it 21 ftlbs, then 44 ftlbs, then loosen all, torque to 89 inchlbs, then to 21ftlbs, then mark and turn the bolts an additional 60 to 65 degrees.
cyl head sub bolts torque 80 to 100 inchlbs.
thanks.

Jan 13, 2011 | 1990 Nissan Hardbody King Cab

1 Answer

Hi,i need torque settings on my nissan hardbody ka20 engine.


Hi, I need torque settings on a nissan hardbody KA20

Nov 20, 2010 | Nissan Hardbody Cars & Trucks

3 Answers

Torque settings for cylinder head nissan sentra


Tighten in sequence to 29ft.lbs then tighten in sequence to 58ft lbs. then loosen all bolts. Then tighten in sequence to 33ft lbs. then tighten each bolt in sequence 90 degrees then tighten each bolt again 90 degrees

Jul 18, 2009 | 1999 Nissan Sentra

1 Answer

Need cylinder head bolts torque settings for nissan 3.2d


what nissan model do you need the head torques for

May 01, 2009 | 1990 Nissan Hardbody King Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

758 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...