Question about 1993 Chevrolet S-10

Open Question

How do you wire a 1993 S10 alternator to a 1982 S10?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1982 s10 dash cluster wire harness looking for 12v source for fuel gauge or wires for fuel gauge


As long as it is ignition feed, it goes hot with the key on. The circuit is dead with the key off. It should work.
There may be a gage fuse in your fuse box? As long as the circuit is dead with the key off.
I don't have wiring info for your model year.

Apr 14, 2017 | Chevrolet S 10 Cars & Trucks

1 Answer

1982 Chevy S10 pickup left turn signal comes on when headlights are turned on


check the wiring harness for a shorted or broke wire there is a cross in it some where there

Jan 29, 2014 | 1994 Chevrolet S-10 Blazer

1 Answer

1982 chevrolet S10 Only headlights come one with


Voltage for the tail lamps shows to be a brown wire. Use a test light, check that wire for voltage, headlamp switch on. If voltage then check black ground wire.
A problem with grounds will cause some weird things to happen. Ground wires are black. You can use a test light to check ground, one end of testlight comes from battery voltage, the other end you touch ground, black wire, you have to penetrate the insulation. If the lite comes on, at least the ground is good enough for the test light.
At the moment, I don't care about the maker lamps. I do care about tail--stop--turn--tag lamp. In the past, I have been stopped because of no tag light.
Just my opinion.https://s9.postimg.org/af5e5kqtb/tail_lamps.jpg
Click on the link, hope you can read it.

May 30, 2017 | Chevrolet S 10 Cars & Trucks

1 Answer

Where do the wires go on the alternator on a 1999 chevy s10.


There is one Battery terminal on the back of the unit, this should be insulated and have a nut on it. Usualy takes a 12mm wrench. There should be a Red wire with a similar size terminal, with a black boot, to cover the terminal. There should be a Black wire with a larger terminal on it, This wire should be bolted onto one of the rear mounting bolts. This terminal is considerably larger and the alternator mounting bolt should go through this terminal. The third wire is rather small and should have a quick connect terminal that should plug into a socket in the back of the unit. This followiing web site has pictures of the quick connect terminal, and alternator. If you click on one of the alternator, you can see the back of the alternator. The shiny terminal is the battery terminal. Do not over tighten this terminal as you can break this off. http://catalog.oehq.com/ShopByVehicle.epc?q=1999-CHEVROLET-Blazer--S10/t10-V6--262ci--4.3l--F/i--Vin--W-Electrical&yearid=1999%40%401999&makeid=16%40%40CHEVROLET%40%40B&modelid=11613%40%40BLAZER+S10%2FT10&engineid=22796%40%40V6%2D262ci+4%2E3L+F%2FI+Vin+W%40%4022796&catid=3%40%40Electrical&subcatid=48@@Alternator+%26+Voltage+Regulator&mode=PA&waitdisplay=True&rewrite=

Sep 29, 2011 | 1999 Chevrolet S-10 Pickup

1 Answer

1993 chevrolet s10 blazer 4.3l clicks but wont start


Sounds like you have a bad spot on the starter armateur...and will need to replace the starter.

If its the original, and you have over 50K miles then its probably a safe bet that your starter is bad, and will fail totally soon...if thats not the case now.

Feb 02, 2010 | 1993 Chevrolet S-10 Blazer

1 Answer

I have a 94 s10 blazer it turns over but does'nt


When everthing is tested or replaced then the only option is a bad computer. or maybe you have clogged injectors or fuel system in the rail

Nov 01, 2009 | 1993 Chevrolet S-10

1 Answer

Removed & replaced dist. cap and rotor on 1993 S10 Blazer 4.3 V-6


The firing order for a Chevy s10 depends on which engine you have. 1.9L engine the firing order is: 1-3-4-2 . Distributor rotates counterclockwise. 2.0L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.5L engine the firing order is: 1-3-4-2 . Distributor rotates clockwise. 2.8L engine the firing order is: 1-2-3-4-5-6 . Distributor rotates clockwise. 4.3L engine the firing order is: 1-6-5-4-3-2 . Distributor rotates clockwise.

Jul 03, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

Chevrolet Blazer S10 1993


i recomend getting a book from the auto parts store. it will have all the electrical diagrams. it costs less than $20.00 and will be a good investment. i have a book for all my cars and have never had to go to a shop.

Jul 09, 2008 | 1993 Chevrolet S-10 Blazer

2 Answers

Power steering


its on the pump. driver side of the pully system.

Jul 01, 2008 | 1993 Chevrolet S-10 Blazer

Not finding what you are looking for?
1993 Chevrolet S-10 Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8215 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...