Question about 2008 Honda Accord
This triangle might be the warning light that the traction control system is switched off. to switch traction control back on again, locate the button to the lower right hand side of the steering wheel, down beside the headlamp levelling switch. The button should read VSA OFF. With the engine running press this button and the lamp should go out. Note that in slippery conditions when the front wheels start to spin this triangle will flash as the traction control kicks in. Hope this helps. Stuartie.
Posted on Nov 29, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
its most likely the traction control warning that the wheels had spun and power was briefly reduced to stop wheelspin. there should be a switch on the dash centre panel with TC or ASR if you press this switch it will put the triangle light on constantly until pressed again. this disables the system so be careful as wheelspin will be inevitable !! lol
Posted on Jul 17, 2010
SOURCE: I have a yellow triangle
The ESP system means the Electronic Stability Program. If the ESP lights on the dashboard permanently the ESP system is faulty. You must access the ESP Electronic Control Unit (ECU) memory for pull out all DTC (Diagnostic Trouble Codes), using diagnostic equipment connected to the data link connector of the car. Then you will be full informed about bad pieces (e.g.: front right wheel abs sensor interrupted, ...). After bad pieces replacement you will be able to erase all faults memored by ESP ECU, in other words reset the ESP system and turn off the warning lamp on dashboard.
ESP system includes ASR - Acceleration Skid Control system.
When ASR warning light blinking the system is activated itself for car acceleration skid control.
For today's typical high-torque engines, traction control (ASR) can increase both comfort and safety, particularly when driving on slippery roads or surfaces offering differing levels of grip. Traction control permits smooth starting and acceleration through the full speed range without wheel-spin or fishtailing.
ASR only operates in conjunction with the electronic accelerator (E-gas) and uses components of the anti-lock braking system (ABS). If one wheel suddenly begins to rotate faster than the others (slip), ASR intervenes in the engine management system and reduces power until the wheel stops spinning.
The ASR system represents a further contribution to active safety as it maintains vehicle traction and directional stability throughout the acceleration phase at any speed. In addition, it reduces tyre wear. Activation of the ASR system is indicated by a flashing indicator lamp in the instrument cluster.
Please do rate my response. Thnaks!
Posted on Feb 20, 2011
Tips for a great answer:
Aug 19, 2014 | 1998 Dodge Dakota
Mar 04, 2012 | 2001 Mercedes-Benz C-Class
Sep 21, 2010 | Audi A6 Cars & Trucks
Jul 17, 2010 | 2002 Volkswagen Jetta TDI
May 17, 2010 | 2002 Audi A4
Feb 12, 2010 | BMW 318 Cars & Trucks
May 14, 2009 | 2000 Volkswagen Beetle
2,098 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: