Question about 1992 Honda Accord

1 Answer

Clutch pedal doesn't register until touching floor

Posted by on

  • bigjc Jan 24, 2009

    1992 Honda Accord LX 5 speed. Car won't start unless clutch is pressed to the floor really hard. I don't understand because the clutch switch is not on the floor. Can someone please help me!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Honda Master
  • 63,661 Answers

This is most likely due to either a failed hydralic cylinder, (slave or master cylinder), or a fluid leak. I would recommend that you replace both, as just doing the one will quickly be followed by the other failing.

Posted on Jul 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to adjust 95 geo tracker clutch


engaging?
you meant dis-engage im sure.
pedal up is engaged,
pedal at floor dis-engages it.
my guess, is the clutch drags unless i push the clutch pedal 100%
to the floor.
1: bad cable is 90% cause. non last this long.
2: no free play is way too loose.
3: broken lever on the pedal top. caused by #1

all fail modes covered here.
http://www.fixkick.com/tranny/clutch/clutch-on-kick.html

Apr 23, 2014 | Geo Tracker Cars & Trucks

1 Answer

Clutch pedal travel


Your pedal height may be adjustable by a stopper bolt at top of pedal. You would have to check the specification for your car. Most important that the pedal has about a half inch free travel before clutch begins to engage. You need that free play to ensure the release bearing (the throw-out bearing) is not touching the fingers on the pressure plate when not engaged. If it always is touching, it will be rolling around constantly and will go out prematurely.
Your new clutch will allow gear engagement sooner as the clutch pedal is released. I mean gears will engage just as pedal is lifting off from floor. You should notice that difference-the old clutch would have taken longer pedal travel from floor before releasing.

Apr 15, 2013 | Cars & Trucks

1 Answer

99 honda accord clutch pedal goes to floor at frist touch


at first touch down to floor and cant shift.. then you touch and touch it again before it shift.. try to see the primary and secondary clutch if there's a leak move the boot to see it.. replace one you see the leak.. then bleed the line..

Mar 17, 2013 | 1999 Honda Accord

1 Answer

Clutch pedal goes to floor and half works on my b2200 1987 mazda pick-up


If the clutch is hydraulic operated, you need to bleed the clutch at the slave cylinder, down on the transmission housing. Bleed it just like you bleed brakes of air in the line-open bleeder valve, someone pushes clutch pedal slowly to floor, close valve, and repeat until fluid comes out valve in a steady stream. Make sure the clutch reservoir is full before starting. It uses regular brake fluid.
If not hydraulic, it would be cable operated. Adjust the cable until clutch pedal is right.

Dec 29, 2012 | Cars & Trucks

1 Answer

Clutch pedal goes strait to the floor??clutch won't bleed up??


It has air bubbles on the piping, fill the deposit with brake solution, and push and pull the clutch pedal with your hand it doesn't matter if it goes straight to the floor if that happens pull it with your hand, repeat that as if you are bleeding it up, then disconnect the piping beneath the car, the air bubbles will be forced out, then reconnect the piping and repeat the procedure, push and pull the clutch pedal like a 100 times, then disconnect the piping and reconnect. The clutch pedal should be able to go back when there is no air on the piping. If that doesn't work, replace your clutch pump

Jun 23, 2011 | Honda CR-V Cars & Trucks

1 Answer

Ford f 150 1988 clutch has no spring and lays on the floor clutch does not work the pedal is on the floor fluid is full. does this need to be bleed?


Yes, there is a bleeder screw on the side of the transmission. Have someone pump the clutch pedal with the engine off. Open the screw and let out the air and repeat until the pedal comes back. Good luck

Apr 27, 2009 | 1988 Ford F 150

2 Answers

Toyota supra turbo 1990, manual (7mgte engine) Clutch problem


you need to bleed the clutch system.. have someone pump the clutch pedal three or four times, hold it down and release the bleeder valve( make sure the person holds the pedal down till after you tighten the bleeder valve back down) repeat this four or five times or till the clutch pedal feels like it did before.. good luck keith...

Mar 21, 2009 | 1990 Toyota Supra

1 Answer

Clutch pedal goes to the floor, then after pulling it up there is pressure...


There is either air in the system or a leak in the clutch slave cylinder. Check your fluid make sure it is full and the cap is tight.

Sep 18, 2008 | 1996 Pontiac Sunfire

Not finding what you are looking for?
1992 Honda Accord Logo

Related Topics:

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21984 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...