Question about 2007 Lexus ES 350
Hold in the trip odometer button , then turn key on, keep holding in the button, Watch the odometer section and it will count down the dashes. When the dashes disappear, its reset. Its a reminder to do maintenence at the indicated mileage. So it needs to be done.
Posted on Nov 09, 2010
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Maintenance Required light
The light needs to be reset. Usually after an oil change they will reset it for you. Directions for doing yourself>>> turn off the engine, press and hold the select/reset button in the instrument panel then turn the ignition switch on. Hold the button until the indicator resets (approximately ten seconds). Directions from your Honda manual. Hope this helps!
Posted on Jun 04, 2008
SOURCE: maitneance required light
Hi.. after you do this step come back and rate as fixya. OK..
Turn the ignitio key to run position
Push and hold for 5 seconds the Trip reset botom.
With the botom pushed turn the ignition key to OFF position.
Keeping pushed the botom.
Turn the Ignition switch to RUN position. keep pushed the trip botom for 10 seconds or untill you see the MAINT_Requi. go OFF.
Remember all this steps with the trip botom pushed. OK.
I hope this solve your question. Thank you for use fixya.
Posted on Aug 01, 2008
I have a 1995 dodge 2500 with a v10 and it runs rough at idle and the maintenance required light came on. I have tuned it up and replaced o2 sensors also profesionally cleaned the injectors and ran sea foam cleaner thru the intake and all vacum stuff besides egr valve or injectors wut can i do plus do i have to shut off the maintenance required light for the 02 sensors to work right
Posted on Sep 28, 2008
PRESS AND HOLD IN THE TRIPOMETER RESET BUTTON. WITH IT IN, TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE ENGINE. THE DISPLAY WILL COUNT DOWN IN HASH MARKS FROM 6 TO 0. AFTER IT REACHES 0 RELEASE THE TRIPOMETER RESET, TURN THE KEY TO THE OFF POSITION. ONCE YOU RESTART THE LIGHT SHOULD BE OFF.
Posted on Dec 18, 2008
No its easy . here are the steps turn ignition to acc/ first turn hold reset button located next to odometer rest button. Hold this button for 30 seconds. then turn ignition to next turn/click where lights come on on the dash ex brake air bag etc. hold for another 30 seconds. The maintenance light should flash and go out start vehicle and your maintenance is done. Good luck ad thanks for using FIX YA
Posted on Mar 13, 2009
Tips for a great answer:
Sep 29, 2014 | 2007 Toyota Prius
Sit inside the driver's seat of the Honda Accord and close the driver's side door. Any interior lights on can prevent the maintenance required light from resetting properly on some year models.
Insert the key in the ignition.
Depress the odometer/trip button located beneath the odometer on the instrument panel. Hold the button down.
Turn the ignition key two clicks forward to the accessory power position. This is also known as the key-on/engine-off position.
Continue to hold down the odometer/trip button for up to 15 seconds until the maintenance required light goes out. On some Accord models, the maintenance required light may blink once before going out.
Release the odometer/trip button and then turn the ignition key to the off position.
Start the Honda Accord to ensure the maintenance required light is no longer illuminated on the instrument panel. If it still is, the reset procedure did not take and you'll need to repeat the procedure.
Apr 13, 2011 | Honda Civic Cars & Trucks
Mar 07, 2011 | 2007 Toyota Camry
Oct 08, 2010 | 2005 Toyota Corolla
Jun 19, 2010 | Cars & Trucks
Mar 13, 2009 | 2002 Honda CR-V
Dec 29, 2008 | 2003 Acura 3.2TL
Jul 31, 2008 | Dodge Ram 350 Cars & Trucks
346 people viewed this question
Usually answered in minutes!