Question about 2000 Plymouth Neon

1 Answer

I have a clunking noise from the front end of my 2000 plymouth neon when i go over bumps.I have changed the lower control arm bushings but i still have the same noise.I also changed the sway arm links and bushings.Any ideas?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is to Funny cause i have done all the same things and also changed the struts and still have this clunking noise , Now there is a creeeeeking noise when the car turns .lol . Now the sterring wheel shakes at low and high speeds . I am now thinking that it might need new wheel bearings

Posted on Jan 08, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Arcadia front end noises buschings?


The acadia has two common problems for front end noises. You likely have worn lower control arm bushings. You will need both front lower control arm bushings. Also it is common for the struts to wear out from about 75k miles up. If they are leaking or have a harsh ride you should replace those as well.

Jul 01, 2014 | 2008 GMC Acadia

3 Answers

Clunking and creeking neon


It sounds as though you have a c/v joint going out on your Neon. If you intend to repair it yourself, the replacement part is around $40-$50.

Feb 02, 2014 | Cars & Trucks

1 Answer

Clunking noise when turning steering wheel going slow around corner


A lot of these Chrysler Town and Country vans had issues with the front stabilizer bar end links, usually you wont feel them move if you try to move them by hand, but they will make an awful noise clunk noise when turning or going over bumps slowly, i would suggest replacing the end links and that should take car of your clunking issue. Also the front lower control arm bushings separate as well and can cause this noise as well.... but i would replace the end links as a first step and go from there.... Hope this helps..

Sep 27, 2012 | 2003 Chrysler Town & Country

1 Answer

Front end noise


More than likely if a clunk type noise, is the lower control arm rear bushings have split Can replace bushings or control arms

Sep 25, 2010 | 2001 Chrysler PT Cruiser

1 Answer

Front end clunks going over speeed bumps there is no unusual tire wear is it upper or lower control arms


There is a bulletin for the front stabilizer links being bad and causing a clunk noise.There in front on the sway bar that hooks up to the control arms.

Dec 02, 2009 | 2002 GMC Envoy

5 Answers

06 dodge charger rt w 5.7 hemi engine has clunk in front end


The LX platform consists of the 300, charger and magnum.

They will all have front end noise. It's just a matter of time. This appears to be a poor design and should be recalled.

The front end should be replaced with energy suspension bushings and greasable ball joints.

The front end needs to be inspected, but here are the usual suspects. Most to least

1. Stabilizer bushings to frame. Rattle and bump sound. Not too expensive.
2. Tension struts - radius arm as some may say. Makes a poping noise and moans when driving and turning.
3. Stabilizer end links if loose to touch. Noise over bumps only.
4. Tie rods. Primarily outer. If you can turn them by hand they need changing. These make noise when braking and turning. Inner is more pronounced when steering. May cause road wander.
5. Upper and lower control arm bushings. Creak!
6. Ball Joints. These sound like an orchestra when going up a driveway. The most expensive fix on these cars. Up to 1800.00 dealer cost. They do not press out the old joints. They use a new knuckle.
7. Steering rack... another expensive fix. Moans and hisses.

Nov 06, 2009 | 2006 Dodge Charger

4 Answers

Loud clunking noise in 2008 Pontiac G5


could be a strut, frame bushing or balljoint

May 25, 2009 | 2008 Pontiac G5

2 Answers

Front end clunk


If it's a constant clunking noise it might be the cv joints, a one time clunk would indicate play between the steering rack and and the wheel somewhere, probably on the lower control arm, meaning the bushes are either very worn, or not present anymore. It could be the bushes on the swing-arm aswell. Best bet: Jack the car up on the right side and grab the wheel, **** it around abit, and check for play.Hope that helps!

Mar 10, 2009 | 2000 GMC Jimmy

1 Answer

2001 Tarus clunking sound


very common problem is the sway bay end links that attach to the strut from the sway bar. They sound like a light chuckling knock over bumps. The bushings that hold the subframe up wear or the bolts loosed due to the bushings wearing. usually the rear ones The bushings are 2 piece ,upper and lower Tighten with 18mm socket

Feb 17, 2009 | 2000 Ford Taurus

13 Answers

Loud clunking noise in front end over bumps


This is most likely one or both of these:

The intermediate steering shaft loses lubrication and develops a clunk - this is an engineering deficiency in many GM products dating back to the early 90s.

and/or

The electrically assisted steering column actually has plastic gears in it which wear down quickly, get sloppy and cause clunking through the steering wheel.

If your car is out of warranty, this will be expensive.

GM knows about both of these issues, and continues to engineer these problems into their products.

Nov 17, 2008 | 2006 Chevrolet Cobalt

Not finding what you are looking for?
2000 Plymouth Neon Logo

635 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...