Question about 1997 Chrysler Concorde
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The leaking from one tank to another was covered by a recall from Ford. Not sure if they still foot the bill for installation of the required check valves. These are still available from the dealership. The rear one is the hardest to install. The check valve can be installed without pulling the rear tank. As for your front sender I would clean all of the connections to the sender and make sure it has a decent ground. If it still only reads at the 1/4 tank level you will have to replace the sender to rectify the problem.
Posted on Jun 06, 2009
Bad fuel level sensor. Unfortunately it is located inside the gas tank. Fairly common problem on GM's. Due to sulphur in fuel. Corrodes the sensor tabs. Expensive to have repalced and NOT a do-it-yourself project, unless you have dropped a tank before.
Posted on Nov 03, 2009
check ur gas cap first for proper seal and or not tightened this is the usual problem the evap system is from your fuel gas cap [gas--vent lines /gas tank-evap canister-throttle body] to ur throttle body/injectors if gas cap good need to check the lines and components for a leak disconnected /cracked broken-as well as the sensors and canister
Posted on Feb 21, 2010
Tips for a great answer:
Aug 12, 2015 | Cars & Trucks
May 05, 2017 | Cars & Trucks
Feb 04, 2011 | 1999 Oldsmobile Alero
Jan 29, 2011 | 2001 Chevrolet Cavalier
Jan 04, 2011 | 1995 Honda Accord
Feb 21, 2010 | 1992 Ford Ranger
Jan 24, 2010 | 1992 Chevrolet Camaro
Nov 02, 2009 | 2005 Chevrolet Trailblazer Ext
Jun 06, 2009 | 1991 Ford F150
45 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: