Question about 2005 Chevrolet TrailBlazer

1 Answer

My oil pressure gauge reads at the 6 o clock position. I replaced the oil seding unit next to the oil filter bu that didn't fix it. Is there another sensor on the engine or is it the gauge itself?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Chevrolet Master
  • 1,311 Answers

The gauge itself is bad, the gauges in the instrument cluster are driven by stepper motor and these sometimes go bad. The cluster can be repaired.

Posted on May 03, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil pressure sending unit located?


The one by the filter is the oil pressure sending unit.

Oct 17, 2012 | Cars & Trucks

2 Answers

How can i fix the oil pump


see this tips and fix it. God bless you
The oil pump supplies oil to lubricate your engine. If the oil pump is worn or is not turning, the engine will suffer a loss of oil pressure, which may result in engine damage or engine failure.
The first sign of trouble may be a low oil pressure warning light, a drop in the normal reading on you oil pressure gauge (if your car has one), or the appearance of ticking or clattering sounds from your engine.
As a rule, most engines only need about 10 PSI of oil pressure for every 1,000 RPM of engine speed. Oil pressure will read higher than normal when a cold engine is first started because the oil is thick. Oil pressure will gradually drop as the engine warms up and the oil thins out. So normal oil pressure on a warm engine cruising down the highway is typically 30 PSI up to 45 PSI.
SYMPTOMS OF OIL PUMP TROUBLE
The first thing you should do if any of these symptoms occur is to stop your car, turn off the engine, let it sit for a few minutes, then check the oil level on the dipstick. If the oil level is at or below the ADD line, add a quart of oil to bring the level back up to the full mark. Add as much oil as is needed to raise the level to the full mark. Then restart the engine. If the warning light remains on, or the oil pressure reading does not climb back up to its normal range, or the engine noise does not go away, you may have a bad oil pump.
The other possibilities include a bad oil pressure sending unit, or a problem with the oil pressure warning light circuit or oil pressure gauge.
OIL PRESSURE SENDING UNIT
If the engine is NOT making any unusual noises and seems to be running normally, and the oil level on the dipstick is FULL, but you are still getting a low oil pressure warning light or low gauge reading, the fault could be a bad oil pressure sending unit.
The oil pressure sending unit is mounted on the engine block. On some applications, there is a spring-loaded pressure-sensitive diaphragm with a switch inside the sending unit. This switch completes the circuit to the low oil pressure warning light if oil pressure drops below a certain threshold. The unit may stop working if the diaphragm inside fails, if the switch is stuck, if the small hole that allows oil to enter the sending unit becomes plugged, if there is a loose, corroded or broken wiring connector at the sending unit, or there is a fault in the wiring circuit between the sending unit and warming light.
On vehicles that have an oil pressure gauge (electronic, not mechanical), the oil pressure sending unit has a small rheostat inside that sends a variable voltage signal to the oil pressure gauge when the diaphragm moves. A worn spot on the rheostat or any of the other problems just described for the simple pressure-type oil pressure switches can cause a problem.
FORD'S FAKE OIL PRESSURE GAUGE
On many Ford vehicles that were built from 1980 through the 1990s, the oil pressure sending unit has two switches, a low pressure and a high pressure. These vehicles also have an oil pressure gauge, but the reading on the gauge is not a true indication of real oil pressure. As long as the pressure to the sending unit is between high and low, the gauge will read normal. If oil pressure drops and trips the low pressure switch, the dash gauge will now read low. Or, if oil pressure goes up and trips the high switch inside the sending unit, the dash gauge will read high. Consequently, don't rely on the oil pressure gauge for an accurate reading in these vehicles. It is only a gross indication if the oil pressure is low, normal or high.
OIL GAUGE PROBLEMS
If the engine is NOT making any unusual noises and seems to be running normally, the oil level on the dipstick is FULL, and you have replaced the oil pressure sending unit but are still getting a low oil pressure reading on the dash gauge, the fault could be in the wiring circuit between the sending unit and gauge, or the gauge itself might be bad.
Check the wiring connections on both ends as well as wiring continuity between the sending unit and gauge. If no wiring faults are found, hook up a pressure gauge directly to the oil pressure port on the engine and check oil pressure with the engine running. If the engine-mounted gauge shows normal oil pressure but the dash gauge is reading low, the problem is a bad dash gauge.
On the other hand, if the engine-mounted pressure gauge reads low and you have done all of the above, chances are the oil pump is worn, or it is not picking up enough oil because of a restriction or blockage in the pickup screen in the bottom of the crankcase.
OIL PUMP PICKUP PROBLEMS
The pickup tube has a screen on the end to prevent large chunks of anything bad that ends up in the crankcase from being sucked into the pump. But we are talking BIG chunks of debris, not normal wear particles or carbon or dust or other microscopic-sized abrasive particles that can cause pump wear over time.

Sep 28, 2012 | 1996 Toyota Tercel

1 Answer

Oil pressure gauge is reading 80 psi. I had the


The oil sending unit is located on the engine block behind the drivers cylinder head area.You have to climb up on the motor to see it cause it is hard to see behind the wiring harness.You may also want to purchase a new sending unit because it is very long and you might need to buy the sending unit socket to replace it.Hope this helps.Good luck.

Jul 20, 2010 | 2003 Chevrolet Silverado 1500

1 Answer

Low oil presure


perform a master oil pressure test. this is done by removing the oil pressure sending unit and installing a oil pressure gauge. if the reading on the test gauge is ok, the sending unit needs to be replaced. if the pressure reads low on the test gauge, there may be excessive bearing wear or you may have worn valve guides. good luck!

Apr 29, 2010 | 1997 Ford F150 Regular Cab

2 Answers

Oil pressure gauge shows 60-80


the oil sending unit that screws in the block beside the oil filter may be faulty,
the worst thing would be the oil pump its self the regulator valve on it

Jan 26, 2010 | 2000 Jeep Grand Cherokee

2 Answers

2002 Jeep Grand Cherokee 4.0L oil pressure gauge reading too high


if the gauge starts a 0 - goes to 1/2 , than full - sounds like gauge is OK - seems to me like the sending unit is bad - you could try removing the sender and trying to clean out the port with "brake clean", letting it dry than re-installing it. the pressure switch is still the least expensive place to start

Oct 27, 2009 | 2002 Jeep Grand Cherokee

1 Answer

2002 Pontiac oil gauge read full pressure at all


The oil sending unit has gone bad and needs to be replaced. The sensor is under the exhaust manifold and above the oil filter on the V6. Replace the oil pressure sending unit, once they fail they may start to leak oil soon. Good luck and keep me posted. 

Jun 29, 2009 | 2002 Pontiac Grand Prix

1 Answer

My 01 bonneville oil pressure gauge is showing 120 and my gas gauge is all over the place


HI, the oil pressure sending unit may be malfunctioning at this point. this will cause erratic readings. if your oil level is proper and there are no apparent oil leaks, you will need to replace the oil pressure sending unit. this will fix the erratic oil pressure readings.

Concerning the gas gauge. this device also has a sending unit that sends the correct fuel level reading to the gas gauge via wire transfer. this sending unit is located and attached to the fuel pump assembly inside the gas tank. replacing this device will fix this issue as well.

Please rate and god bless:)

Apr 28, 2009 | 2001 Pontiac Bonneville

2 Answers

Fluctuation on the oil pressure gauge reading


The oil pressure sending unit is a sensor with an internal diaphragm, if the internal diaphragm is damaged , or the line to the diaphragm is blocked you can get this kind of fluctuation on the oil pressure gauge.

The oil pressure value must be read by installing a mechanical gauge near to the oil pressure switch and checking the pressure.

If pressure is ok, replace the sending unit. If there is a real pressure drop, check the oil pump.

If you still get fluctualtion after replacing the oil pressure sending unit, replace the oil pressure gauge.

Nov 24, 2008 | 2003 Toyota Sequoia

Not finding what you are looking for?
2005 Chevrolet TrailBlazer Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8518 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...