Question about 1998 Buick Century

Open Question

Instructions on replacing water pump on 1998 Buick Century Custom , and illistration water pump froze up

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 341 Answers

SOURCE: How to change a water pump on a 1999 Buick Century 3100?

the water pump on the 3.1 isnt to hard to change ...

  1. Disconnect the negative battery cable.
  2. Partially drain the cooling system into a suitable container.
  3. Remove the drive belt guard.
  4. Loosen the water pump pulley bolts before removing the drive belt. This should help keep the pulley from turning as the bolts are loosened.
  5. Remove the drive belt. Remove the water pump pulley bolts and remove the pulley.
  6. Remove the water pump bolts and separate the pump from the engine front cover.

Posted on Dec 09, 2008

  • 106 Answers

SOURCE: 2000 buick lesabre - water pump replacement

first disconnect the battery then check how the serpentine belt is lined up so u can take it off and put back on. Then the pump should be on the side of the motor with 9or12 bolts there could be more! after taking out take razorblad and skrap the old gasket clean wipe of then put new gasket and pump back on dont over tighten the screws cuase the pump my be aluminum.

Posted on Mar 19, 2009

  • 3 Answers

SOURCE: 2003 Buick Century Custom and the Service Engine Soon Light

You will need to have a reputable mechanic do a diagnostic check on the car to determine the problem. This should pull up a code number in your car's computer and help point the mechanic and you in the direction of the malfunctioning part/s.

Just today, I had a diagnostic check done on mine for nearly $45.00. The mechanic was able to figure out the reason why my service engine light was staying on. I knew my car's radiator fans failed to run when car's engine was hot except when the A/C was running. I had changed out the sensors and was never able to get the light to go out or get the fans working. They were able to determine that the 25 amp fuse for the fans located under the hood was blown. After replacing it, the fans worked as they should, my car runs cooler and the engine service engine light is now out. Of course there are many possible reasons why the service engine light may come on including problems with the car's emissions. A reputable mechanic can solve your problem.

Posted on Apr 09, 2009

  • 1 Answer

SOURCE: 2000 Buick Century Custom 4dr sedan

The cabin air filter for your 2002 Buick Century is located under the cowl in the firewall between the engine compartment and the passenger side of the front seat. To change the filter:
1. Leave the wipers in up position.
2. Open the hood
3. Remove the weather stripping from passenger side of cowl
4. Unclip the window washer line (two or three places)
5. Remove the three fasteners with an ordinary screwdriver (one is easy, the other two were more difficult)
6. Take out the cowel cover
7. Remove old filter
8. Put in new filter
9. Replace cover, fasteners, washer line, and weather stripping.

Do it about every 20,000 km. I left mine for nearly 130,000 km and it was filthy dirty.
New filter costs about $12

Posted on May 02, 2009

  • 102 Answers

SOURCE: my 1998 buick century is leaking coolant from the

bad water pump..replace it with a new one

Posted on Mar 09, 2010

Testimonial: "thank you. pretty much confirms what i suspected. john l."

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Illistration how to replace water pump


It is suggested if you have never changed a water pump before..Don't try doing it yourself. Complications will hender you I am sure after it is installed. These cars made these days are worst to work on than engines back in the 70's.. Illustrations can be found in any library in your town

Sep 17, 2010 | 2000 Buick Century

1 Answer

What brand motor oil is the best for 1998 buick century custom


Any major brand will do 5w30 or 10w30 wt. plus a delco filter. Do not use fram.

May 12, 2010 | 1998 Buick Century

1 Answer

Fuel pump assembly removal. I need to replace the Fuel pump in my 1999 Buick Century, I believe it is a custom model. I have the replacement pump already, I simply need the instructions to remove and...


Go to GM website and search for Service Data for your year/model vehicle. Then Contact GM and request access to Service Manuals regarding your vehicle.

Jun 30, 2009 | 1999 Buick Century

1 Answer

Leaking antifreeze buick century 1998


Check your heater hoses. It sounds like your leak is a hose.

May 23, 2009 | 1998 Buick LeSabre

1 Answer

I have a 1998 buick century limtied


I would suggest buying a Haynes/Chilton book for both models, they may even be one in the same if the years are close enough. Look up the schematics for both and compare the differences circuit by circuit. There may be some slight differences with connection fittings, but thoroughly review the schematic diagrams first.

Apr 19, 2009 | 1998 Buick Century

1 Answer

Power windows stopped working


the switch could be bad replace the switch

Mar 06, 2009 | 1998 Buick Century

1 Answer

What tools are needed to replace water pump on 99 Buick Century?


A mechanic.

If you don't know the motor size, do yourself a favor and don't touch it.

Feb 12, 2009 | 1998 Buick Century

1 Answer

How to change a water pump on a 1999 Buick Century 3100?


the water pump on the 3.1 isnt to hard to change ...
  1. Disconnect the negative battery cable.
  2. Partially drain the cooling system into a suitable container.
  3. Remove the drive belt guard.
  4. Loosen the water pump pulley bolts before removing the drive belt. This should help keep the pulley from turning as the bolts are loosened.
  5. Remove the drive belt. Remove the water pump pulley bolts and remove the pulley.
  6. Remove the water pump bolts and separate the pump from the engine front cover.

Dec 09, 2008 | 1998 Buick Century

Not finding what you are looking for?
1998 Buick Century Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...