Question about 2007 Suzuki SX4

1 Answer

Emission control light just turned on last night...i read the manual and dont think its a water problem. i have 43k miles on it...could you share what could be the problem...and if its a major cost for a repair?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 5,763 Answers

Whenever the computer sees a problem it stores a code, this code will tell you where the problem is, this cant be major its only got 43k on it, check your gas cap and make sure its tight, a loose or missing gas cap will turn the light on, if its loose tighten it and drive for a week and it will reset if it tight then go to an autopart store many of them scan the compuetr for free and give you the cide or codes , also one more thing, this is a federal law that dealers must warranty certian emmission control parts for 8 years or 80,000 miles, so if the code is something like an o2 sensor thats warranty part, hope this helps.

Posted on Nov 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a ford fiesta 2006 diesel manual car , last night when i start my its showa yellow light in the rpm metre and i try to increase the speed but its would not go more than 30kms and my car suddnlt


The light is the engine light and the reason that you cannot go fast is because the CPU is in limp mode. Check the oil and water levels and check engine operating temperature. Have the codes read to find the sensor that put the car in limp mode to protect the engine and gear box.

Feb 24, 2014 | Ford Cars & Trucks

1 Answer

How do I go about manually resetting the maintenance required light on my 2.4L 1992 Mitsubishi Mighty Max pickup truck?


When service to the emission control system has been completed slide the switch to the opposite position, turning off the warning light.
If the service was for the 120,000 mile interval remove the warning light bulb.

CAUTION: If the speedometer is to be replaced set the odometer to the same reading as the odometer being removed. (consult your local motor vehicle laws)



c552c5ee-ba20-417e-87d4-1370e6e09690.gif

Aug 25, 2013 | 1992 Mitsubishi Mighty Max

1 Answer

Just had oil change, also needed a timing belt, water pump as well as new brakes all around and new tires this was a week ago, now the engine indicator light went on and stays on. Manual asks to check...


Why was a timing belt/water pump service done @ 43K miles??? This is die at 90K miles!! As for the check engine light, they must have disconnected or damaged something. In order to figure out the chk engine light, you must have the computer scanned for the error code(autozone does this for free). Post the code on fixya. Bring the vehicle back for all these issues and demand them to fix it as this wasnt an issue prior!!

May 31, 2010 | 2004 Toyota Avalon

1 Answer

My service soon light came on and the message "service emissions". What is the most likely problem


hard to know if you dont have a scanner to read code. i would suggest making sure gas cap is on tightly this in the number one problem that makes these lights come on.it could be anumber of things these are emmission related problems for light o2 sensor,clogged catalytic convertor,car may need tune up.change oil,fluid levels,spark plugs,air filter.fuel filter idle air control valve and the list goes on but make sure gas cap is on tight and drive for a couple of miles and see if it turns off..

Mar 07, 2010 | 1996 Cadillac DeVille

3 Answers

Trouble light comes on.


most likley the people who serviced it never reset the service clock up,, so the car dont know its just had a service,, and still "thinks "it needs one soon, just get the service clock reset

Feb 21, 2010 | 2000 Chevrolet S-10

1 Answer

1996 Maxima - Emissions (Diagnostic)Testing isn't reading


there is a section inthe manual that tells you how to prepare the car for emissions test which can take less than 2 hrs without driving 400 miles normally if there still a problem the check eng light will come back on shortly after the preperation. if the eng light comes on in acc position on igition switch and goes off the computer is fine.

Jan 06, 2009 | 2002 Nissan Maxima

2 Answers

Check engine light is runs ok


You can read codes without a scanner on the 1995. You have to turn the switch on the PCM (powertrain control module) which is by gas pedal near the floor under the dash. The switch is turned with a small screw driver. Get a Haynes manual or go on internet for procedure and codes. You read the flashing service engine light to get and erase codes. Or, do as other poster said, get an OBD-II code scanner for $80, or go to parts store (Advance or AutoZone will do it) and they will read the codes for you. If you use a code reader, the port (plug receptacle or DLC) is on the passenger side under dash near center of car, near floor, on other side of PCM. You have to pull off a trim cover piece to get to it. I think 1995 is the last year for reading the flashing light and all cars from 1996 on must use OBD-II scanner/reader.

Nov 03, 2008 | 1995 Nissan Maxima

1 Answer

I think the water pump/thermostat are bad. Car is overheating and have changed radiator resevoir. Check engine light is on. Can you send me diagram of motor


Not sure if there are two thermostats, I know of one that I changed, it sits right above the starter and right below your air box. I had the problem my guage was reading hot on a cool night so I went and popped the hood and (after cooled) opened the radiator resivoir and the results were dry as a bone. I had steam coming from the cap. if you so this be sure to slowly release the pressure from the red cap that reads HOT WARNING DO NOT REMOVE. that is where you pour the coolant/water mix.

After I did that I took it to a shop and had it flushed, cleansed and refilled.....then I was runnin a beutiful bright green. Cost about 69.99 for flush then I found out my water pump pully was locked up and not rotating (not pumping coolant). So I fixed that last night and she's runnin pretty good after 190,000 miles.

Good Luck Mazda's

Aug 05, 2008 | 2000 Mazda 626

Not finding what you are looking for?
2007 Suzuki SX4 Logo

751 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...