Question about 2006 Chevrolet Malibu

1 Answer

My left rear turn signal is out on my 2006 Malibu. The bulb is good, but I replaced it anyway since I had the assembly apart. The left front flasher works fine as well. Before I try and replace any fuses, I was wondering if that would even solve anything seeing as how everything else is working and there doesn't seem to be a separate fuse for each blinker. I don't have a full repair manual and I don't know much about the electrical system in this vehicle. All the lights work, but the left rear doesn't flash.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 11,447 Answers

Stop lamp an hazard lights work ?
The body control module (BCM) is responsible for controlling the turn signals and hazard lamps. When the turn signal switch is placed in either the left turn or right turn position, the BCM receives a signal from the turn signal switch. The BCM then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, the BCM receives a signal from the hazard switch. The BCM then will send an on-off voltage signal to all the turn signal lamps. All the turn signal lamps will flash including both IPC turn signal indicators.

Repair an open, high resistance, or short to ground in the inoperative turn signal supply voltage circuit. Refer to Circuit Testing and Wiring Repairs .
Did you complete the repair?

Posted on May 16, 2017

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 7 Answers

SOURCE: left turn signal problem on06' chevy tahoe

check your left light fixture.make sure you have a good contact.sometimes they burnout

Posted on Feb 07, 2009

countrysi248
  • 443 Answers

SOURCE: Rear blinker does not work need to access bulb

Your rear bulb is burnt out if you say the front one is working .. the speed up of flashing means your bulb is bad.. you might have to get in the trunk and unscrrew those hand wing nuts and push that tail light outward to get to the bulbs ... thanks Jerry and holler if you need more.

Posted on Apr 22, 2009

  • 233 Answers

SOURCE: 1998 Chevy Cavalier Z24 left rear brake/turn lamps will not work

Sometimes even a new bulb will not work. If you have a Digital Multi Meter you can check that you have power going to the rear. I know that sometimes when a vehicle loses a bulb in one end that it can make the other end stop working. With that said, I suggest that you double check to see that the front works. I used to own a 98 Cavalier RS with the 2.2 liter motor and I know that there are fuses under the hood and behind a little door on the drivers side in the car. Might check fuses under the hood also.

Posted on Jun 09, 2009

kidspeedy
  • 321 Answers

SOURCE: left rear turn signal light on my 1999 chev. s10 is not working

any increase in bink speed is direcly related to a bulb being burt out.

Posted on Jun 12, 2009

  • 4 Answers

SOURCE: 1997 Chevy Tahoe both turn signals stopped working

Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Posted on Jul 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My left turn signal flashes rapidly after applying the break


Check your bulbs sound like one is burnt out, or it is not properly grounded. Good luck.

Mar 15, 2014 | 1999 Pontiac Montana

1 Answer

Honda Accord 2006 turning signal not functioning


First check both front and rear lft side bulbs. Then, I would check the signal relay. I think it is under the dash one the left side. Here is want your are looking for. A new one cost about $12-$15 at most parts stores. Last I would suspect the signal switch assembly on the column. (Perchance you have a trailer hitch plug? If so look there too)

j
uploadswith image12_12_2013_2_15_10_am.jpg

Dec 12, 2013 | 2006 Honda Accord

1 Answer

Why won't the front turn signal work? I just replaced the entire headlamp assembly on 2005 Chevy Malibu.


is turn signal plugged in?
if this is a new bulb try the old one to make sure bulb is not at fault
then need to check the voltage at the connector.
A test light is easiest way from a good ground to each terminal.
if flashing the ground connection could be corroded.
if nothing at connector try the connection at the turn signal switch.

Feb 24, 2013 | Chevrolet Malibu Cars & Trucks

1 Answer

Malibu 2006 LT. The Left Front and Right Tail Turn Signal Lamps don't blink, the light just stay on but not blinking, check bulb ok. What could be the problem here? Thanks.


The other turn signal bulbs are blown, or the turn signal unit itself is bad. it is under the dashboard and makes the ticking noise when the turn signal is on.

Oct 09, 2010 | 2006 Chevrolet Malibu

3 Answers

I need to change the left front turn signal bulb on a 2006 Cadillac SRX? Looks difficult. Paul LeMaster


hi Paul

Should be able to open the hood remove plastic headlight cover & pull pins (2) on light assembly whole light assembly will pull out then replace turn signal.

Good luck.

Dec 02, 2009 | 2006 Cadillac SRX

1 Answer

The drivers side rear brake light/turn signal only not working


you replaced the bulb with the wrong one i.e. a two filament bulb with a one filament bulb

Oct 05, 2009 | 2006 Ford F-250 Super Duty

1 Answer

Steps to replacing right front signal light bulb in 2005 Malibu


Raise hood and remove two hex bolts holding light assembly. You will see three round rubber covers, approximately 4" in diameter. Unscrew the one to the far left, giving access to the signal light bulb. The bulb pulls straight out. Insert new bulb, replace rubber cover, attacht light assembly back to vehicle with hex bolts, close hood, and pat yourself on the back for job well done.

Mar 30, 2009 | 2005 Chevrolet Malibu

1 Answer

2004 Cherolet Malibu turn signals work sometimes


the switch in the column has dirt in it or is coming apart most likely.always replace bulbs and flasher(s)
first ,then column switch before spending any money on signal diagnosis. for 15$for bulbs,flasher,20-40$switch,you 90%would have solved problem. gino r.

Mar 22, 2009 | 2004 Chevrolet Malibu

1 Answer

Left turn signal problem on06' chevy tahoe


check your left light fixture.make sure you have a good contact.sometimes they burnout

Feb 07, 2009 | 2006 Chevrolet Tahoe

Not finding what you are looking for?
2006 Chevrolet Malibu Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...