Question about 2001 Isuzu Rodeo

1 Answer

Check engine sign is on,the sign comes on the moment ignition is switched on.i have changed engine oil

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Contributor
  • 361 Answers

The engine light can mean many different error messages. The only way to find out is to hook it to a computer reading module. Try visiting a dealer or your local garage and see if they will hook it up for you, it only takes a moment. Then it will give the error message code 9 times out of ten its the oxygen censor.

Posted on Nov 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

2007 chevy uplander ls minivan, low oil pressure warning light and bell comes on and off after 20 minutes of driving


Since you do not state whether you checked the oil and what the condition and level it was, that is important to know for advise to be given.

But unfortunantly, what you describe is some of the indications of a blown head gasket. Did you have white smoke coming out of the exhaust? Is there any indication of water on your dipstick? Is there a oily slim on the top of your antifreeze in the radiator overflow?

Jul 05, 2011 | 2007 Chevrolet Uplander LS Minivan

2 Answers

The change oil light came on. on my friends 2002 monte carlo ss so i gave it an oil change and a new filter . the light won't go off.


The "Oil Change Reminder Light" has to be reset.

To reset the oil change reminder light with the accelerator pedal, turn the ignition switch to the ON position. Do not start engine. After turning the ignition ON, depress the accelerator pedal fully to the floor and let it up again 3 times within 5 seconds. The oil change reminder light should flash a few times to let you know that it is resetting. If it does not flash, turn the switch OFF and repeat the procedure. After it flashes, turn the ignition switch OFF. Then start the engine. The light should come on for a bulb check then go out and stay out.

Apr 12, 2011 | 2002 Chevrolet Monte Carlo

3 Answers

I have a noise in the fuel tank of my 1999 cadillac escalade is this noise could be cause by a bad fuel pump or a dirty fuel filter? Also when i turn my truck on some times a little biy of blue smoke comes...


as for the noise if it is a high pitched whine that you can hear while the engine is running its probably normal...most of them sound like this. it should be the same sound that comes on briefly as you turn the ignition on before the engine starts. if it is extremely loud, it may be a build up of debris in the filter causing too much back pressure on the pump or the pump may be on its way out. as for the blue smoke.... blue smoke is oil burning in the engine. you didnt say how many miles are on the vehicle but as a vehicle ages it will usually consume some oil as the engine is running. if the smoke only comes out on start up its probably due to the valve seals weeping a tiny bit of oil thru them and its burned up once the engine is running. its not too much to be overly concerned with at the moment, just check your oil level in the engine a little more frequently as now you know that you are consuming some oil at times. also switching to a "high milage" oil may help as they have conditioners in the oil that slightly swell rubber seals in the engine.

Mar 13, 2011 | 1999 Cadillac Escalade

1 Answer

How to reset oil gauge after oil change


SWITCH THE IGNITION ON.ENGINE OFF,SLOWLY DEPRESS AND RELEASE THE ACCELERATOR PEDAL 3 TIMES WITHIN 5 SECONDS.WHEN CHANGE ENGINE OIL LIGHT FLASHES INDICATING RESETTING DONE.SWITCH IGNITION OFF.START ENGINE OIL LIFE WILL CHANGE TO 100 %.

Feb 25, 2011 | 2005 Chevrolet TrailBlazer

2 Answers

Low oil pressure warning comes on when RPMs go below 1000


check if the oil is clogged , if the duration or mileage hs exceeded the limit for oil change , if not check the oil pressure switch for fault.
However if the switch is OK then the oil pump pressure is down and is not a healthy sign. you might need serious attention to the engine, might even need an overhauling

Sep 28, 2010 | Ford Explorer Cars & Trucks

2 Answers

My van is Toyota Hiace Dx & when i start my vehical in the Dashboard i can see a yellow color oil can, i want to know wht discribes that sign


The yellow symbol with a line under it means only to warn you if the engine oil level is low when its running. If its RED sign then this is your low engine oil pressure warning light.

Jul 28, 2010 | Toyota Corolla Cars & Trucks

2 Answers

Oil maintenece light is on. Oil level is good. Could a clogged filter make this light go on?


This should only be indicating time for an oil change. Now, if the red, check engine light comes on, then you have an oil/engine problem.

Possibly the maintenance light wasn't reset when the last change was done. If you don't have the owners manual to check, I found a referenced method (below) to reset it through AMSOIL synthetic oil products. Good Luck

To reset Engine Oil light. Turn the ignition key to RUN with the engine off. Fully press and release the accelerator pedal three times within five seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off. If the light comes on again and stays on for 30 seconds at the next ignition cycle, it did not reset. You will need to reset the system again.

Feb 09, 2010 | Saturn L-Series Cars & Trucks

2 Answers

LEXUS LS 2004 Maint Reqd (Master warning light) how I can switch off after change the oil engine?


You can disconnect your battery for 15 minutes or pull the fuse for an ECM or PCM fuse, but the best way is to visit any local repair shop. Most shops will have a universal Check Engine Light Code Reader that can quickly and safely reset check engine light trouble codes. It should take about 30 seconds.

Ask your local service center if they could reset the check engine light with a Check Engine Light Code Reader.

Dec 14, 2009 | 2004 Lexus LS 430

2 Answers

How it reset service engine light


Is it the "oil change req." light? Your owners manual will have the process for reseting the oil change light.
If it is "service engine soon" light, the vehicle will need to be scanned with a professional scanner.

Jun 20, 2009 | 1996 Dodge Caravan

1 Answer

Oil light flashing here and there..weird


is it getting noisy... that's usually the first clue... to rule out anything serious have the oil pressure checked.

Robert

Please take a moment to rate this solution thanks

Jan 21, 2009 | 1996 Honda Civic

Not finding what you are looking for?
2001 Isuzu Rodeo Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14384 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...