Question about 2004 Chrysler Pacifica

1 Answer

Fuel line is leaking at the top of enigine where the fuel line comes to the motor

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 5,763 Answers

I belive its plastic, that can be cut out and repaired, you can buy a part of the line with the end type needed and then theres a metal sleeve that connects it all together, let me see if i can give you a picture of the repair line the thing is to cut out the old and take it to autoparts store to match up as there are diffrent angles and sizes,fuel line is leaking at - johnjohn2_14.jpg

Posted on Nov 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have gas spurting from a fuel line at the top backsde of motor when the key is turned on, what fuel line is it and how hard is it to fix


Fuel lines could be a real bear to get to. Try locating where the leak is coming from. It may not be where the drips are. The fuel line may be pressurized, so you need to be cautious.

Mar 22, 2014 | 2000 Dodge Ram 1500 Truck

2 Answers

I,am leaking diesel in a ford f250 7.3 litre diesel turbo powerstroke. It is coming up toward the passenger side of oil pan. It is a consistent leak that seems to getting worse. Also there is a power...


sounds like a fuel line. trace the fuel line from under the truck on the driversside should go up the back of the motor. the fuel line is probably spraying over to the passenger side of the motor. yes this could cause a power loss.

Aug 23, 2010 | Ford F-250 Cars & Trucks

2 Answers

Gasoline leak in part on top of block of the 2000 buick cent 3.1L


sounds like a fuel injector is leaking they have seals
also check the fuel rail for leaks there should not be any fuel coming from inside the engine, unless u have a crack in the intake someware

Feb 24, 2010 | 2000 Buick Century

1 Answer

Leaking gas on top of motor not sure what the part is


check for leak at fuel fittings on injector rail, faulty fuel pressure regulator (small round canister type valve on end of fuel rail, has vacuum line attached to top) leaking o-rings on injectors.

Dec 26, 2009 | 2001 Oldsmobile Alero

1 Answer

Oil leak on top front of 2002 f350 super duty diesel engine


if it's a diesiel the it's coming from your oil line to your turbo. if it is gas then it could be a leak coming from a leaking valve cover gasket.

Aug 22, 2009 | 2002 Ford F350 Super Duty DRW Reg. Cab

2 Answers

Have a fuel leak under front of car


I would trace fuel lines from tank to fuel rail on motor. These are high pressure lines so do not try to quick-fix them. You will have to measure the lines and replace them if they are leaking. Unless the fuel is leaking from lines by fuel rail or by fuel filter.

May 22, 2009 | 1993 Ford Mustang

2 Answers

1999 dodge ram 2500 5.9 cummins diesel.won't start.turns over thats it. put in a new intake fuel pump. still won't start.got fuel to the injectors sometimes.


Check the fuel pressure at the filter. Odds are the lift pump, located below the filter, is toast. Continual cranking of the motor with a bad LP wil cause the injector pump to heat up and burn out. Replace the LP and fuel filter. Bleed the system by cracking the inlet to the injector pump and bumping the enigine over so the LP will run. Once you have fuel at the injector pump, crack injectors 1,3,and 4. Crank the motor for no more 6 or 7 seconds at a time until it turns over. Give the pump time to cool for a couple of mintues between cranks. This process is easier with two people, one to crank and the other to watch for fuel and tighten the injectors once it starts. If the injector pump is fried at this point from cranking with no fuel, the motor should idle, but will stumble all over itself when the throttle is applied.

-Brandon

Jan 11, 2009 | 1999 Dodge Ram 2500 4WD

Not finding what you are looking for?
2004 Chrysler Pacifica Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8531 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...