Question about 2000 Volkswagen Golf

1 Answer

How easy is replacement of the head gasket on a 2000 mk4 golf v6 4motion?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 632 Answers

If you rate this 1 - 10, 10 very difficult, this will be a 10. This requires special tools along with a service manual for reference regarding torque procedures and settings.

Posted on Nov 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CHANGE HEADLIGHT IN2003 VW GOLF


Hi if your VW golf is from the mk4 era then you'll have to possibly take off the bumper to replace the headlights or headlight unit Search YouTube for bumper removal guides it's very easy

Jan 11, 2014 | Cars & Trucks

1 Answer

I have white smoke coming out of the exhaust on my golf mk4 1.4 16v it failed m.o.t on emissions, what could it be? Thanks


Cracked cylinder head gasket. Just replace it, and everything will be all right. Good Luck!

Oct 21, 2011 | 1999 Volkswagen Golf

1 Answer

Where are the spark plugs located on a golf mk4 1.4 16v 2000


VW Golf mk4 1.4 16V, m.y. 2000
The spark plugs are placed under engine cover. See the picture below:

tdisline_722.jpg

Jul 06, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

HOW CAN I DIAGNOSE FOR FAULT OF OVERHEATING GOLF GTI MK4 YEAR2000. I HAVE CHANGED THERMOSTAT. IT COULD BE ENGINE GASKET OR WATER PUMP. HEATING IN CAR NOT WORKING AFTER THERMOSTAT CHANGE.


Have a Cooling System pressure test done. Any good shop can do it for you. It can be alot of things and instead of throwing parts at it, have the system pressure tested. That will identify your problem.

Mar 12, 2011 | 2000 Volkswagen Golf

2 Answers

How do i replace the radiator on my vw golf mk4 1.9tdi year 2000


  • Drain coolant from bottom hose through a valve
  • Disconnect coolant hoses from radiator
  • Remove front body section and move lock carrier to service position
  • Remove retaining clamps from A/C hoses near condenser
  • Unbolt A/C condenser from radiator and support condenser with wire or heavy duty tie wraps Note: Do not discharge the A/C refrigerant. Support the A/C condenser with wire and avoid stretching or kinking the hoses.
  • Remove radiator mounting bolts from both sides and slide radiator slightly to the rear
  • Remove radiator and fans together from below
  • Installation is the reverse of removal

Jan 15, 2010 | 2000 Volkswagen Golf

1 Answer

Golf mk4 tdi major oil leak from lower engine. oil warning light on.


If is loosing oil too fast the light will come up,because oil pump won't compesate for oil pressure lost without proper oil level.Anyhow,i'm thinking oil pan has bad gasket or, or possibly could be hole in the pan.It happens when small rock on the road hits pan so hard it will make a hole.Cheap materials like Magnesium sulfate that are commonly used on VW's these days are just not quality.Hope I could help you.

Jan 05, 2010 | 2000 Volkswagen Golf

1 Answer

Serious electrical problems wiv vw golf mk4 gti turbo yr 2000


I had a VW rabbit that developed mad electrical problems. It started when one day the headlights remained on and would not shut off. It turned out that a $2.00 gasket for the antenna wire had failed. This allowed road water from the wheel well to leak onto the fuse box. In time the fuse panel corroded and shorted out. I had to replace the fuse box twice and use rubber epoxy to seal the leak.
Check all fuses and electrical wiring for signs of shorts or corrosion.

Jul 25, 2009 | 2000 Volkswagen Golf

1 Answer

Golf mk4 ignition wiring


941-50 or -500 (not sure if it is 50 of 500)
927-00
971-81
971-80.

You'll need to get the following wiring loom schemmatics (for the AUM 1.8Litre 150bhp, Turbo, 5spd Manual Engine) to figure out the correct sequence of events.

Make sure that you give your chassis number to the dealer first of all to ensure you have the correct diagrams as those supplied by me may not be chassis specific for your car.

regards

Bren

Sep 04, 2008 | 2000 Volkswagen Golf

Not finding what you are looking for?
2000 Volkswagen Golf Logo

Related Topics:

245 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

yadayada
yadayada

Level 3 Expert

77186 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8737 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...