Question about 1992 Toyota Corolla
If the rack leaks,it has to be replaced.
There is no repair. They are remanufactured
You could just have a leaking P/S Hose,which you could change yourself
Posted on Nov 08, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
if you have a leak from the back of the rack your sector shaft seal is defective. to replace it you need to remove the rack and do it on the bench.remove the locking nut and pull the seal from inside.if you are a rooky replace the rack with a rebuild one. good luck.
Posted on Jan 27, 2009
all the boot does is keep dirt from getting to the lip seal if its leaking youl atleast need to replace seal and boot i think on that model youl need a specialty inner tie rod tool to remove before you can get the seal out. if it was me i believe id replace the whole rack if you plan on keeping the rig long hope this helps please rate me thanks
Posted on Mar 22, 2009
ok thees instructions that i have is for replacing the power steering pump but it has a great pic witch shows the power steering hoses i hope it helps
NOTE The following procedure requires the use of the GM Puller toolNo. J-25034-B or equivalent, and the GM Pulley Installer tool No.J-25033-B or equivalent.
WARNING Be sure to cap all openings in the pump hydraulic system toprevent excessive fluid spillage and the possibility of systemcontamination.
Fig. Pump pulley removal and installation
Fig. Exploded view of the power steering pump mounting
Fig. Typical power steering pump hose routing
Posted on Apr 23, 2009
YOU CANT USE A REGULAR FUEL LINE ON POWER STEERING AS A HIGH PRESSURE HOSE.BECAUSE POWER STEERING PRESSURE IS 1000 PSI.YOU HAVE TO BUY THE POWER STEERING HIGH PRESSURE HOSE IT HAS NUMBER OF PLIES MATERIAL WEAVES TO MAKE IT STRONG.IT WAS MADE FOR POWER STEERING HIGH PRESSURE.YOU DONT HAVE A BLOCKAGE .THE HIGH PRESSURE HOSE JUST WORE OUT.REPLACE IT .IT SHOULD FIX THE PROBLEM.
Posted on Sep 04, 2009
Tips for a great answer:
Jul 12, 2014 | 2001 Ford Windstar
Dec 12, 2013 | 2002 Buick Rendezvous
Feb 08, 2012 | Cars & Trucks
Jun 18, 2011 | 1997 Pontiac Grand Am
Jan 24, 2018 | 1997 Toyota Camry
Dec 04, 2010 | 2000 Pontiac Grand Prix
Apr 21, 2010 | 1991 Toyota Camry
Dec 17, 2009 | 2001 Ford Windstar
Sep 28, 2009 | 2005 Dodge Grand Caravan
345 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: