1997 Mercury Sable Logo

Related Topics:

Posted on Nov 08, 2010

Where is the speed sensor located in a 1997 mercury sable?

5 Related Answers

Anonymous

  • 958 Answers
  • Posted on Oct 04, 2008

SOURCE: Where is the starter located on a 1993 mercury sable engine

trace the big cable that came from the positive terminal of your battery. at it's end is the starter.

or if it passes trough a big relay, then there is another big cable from that relay that would go down to the side of the engine, either left or right, that would be the starter.

tnx 4 using fixya,

drcool

Ad
emissionwiz

Marvin

  • 85242 Answers
  • Posted on Nov 12, 2008

SOURCE: DPFE Sensor with codes PO401 And PO402

The DPFE is located near the EGR valve, it has 2 very thick silicone rubber hoses connected to it that come off the exhaust. It is rectangular and about 1/2 the size of a pack of smokes

Anonymous

  • 659 Answers
  • Posted on Dec 02, 2008

SOURCE: Oxygen Sensors

ok Bank 1 is the rear bank and bank 2 is the front bank sensor 1 in each bank is the one closest to the manifold they have green connectors sensor 2 is the sensor after the cat converter and is a blue connector

Anonymous

  • 659 Answers
  • Posted on May 03, 2009

SOURCE: location of the camshaft position sensor in a 2004 mercury sable

it is located on top of the engine right below the air inlet tube at the base of the intake it is a black sensor on top of a silver housing where the distributor would normally be

Anonymous

  • 163 Answers
  • Posted on Mar 28, 2010

SOURCE: fuel pump relay location on 98 mercury sable

its under the hood on driver side what the problem not starting check the trunk area for the fuel cut off switch poss bad or tripped did u get hit or someone bump ur car

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why isn't my speedometer working& how do I repair it? 1998 mercury sable gs

1997 Mercury Sable LS VSS Vehicle Control Sensor ...

? 2:13
www.youtube.com/watch?v=1O0kJJjjhk0
Jun 1, 2012 - Uploaded by Trevor Harris
I am trying to replace my Vehicle Control Sensor on my 1997Mercury Sable LS 3.0 Liter. Here's the ...
0helpful
1answer

Where is the 94 mercury sable speed sensor located ?

in the transmission but if you have 4 wheel abs then each wheel would have speed sensors as well.
0helpful
1answer

Where is the ( speed valve sensor ) )located at on a 03 mercury sable . Thanks!!

Do some research & get back to us
with the correct part name
0helpful
1answer

Location of speed sensor of 1999 mucury sable

it is on the tail end of the transmission . remove the pasenger side tire and you can see it
1helpful
1answer

How do I locate the turbine speed sensor on a ford mercury sable 2001

I don't have a picture--but recall that it may be
on top of the trans case

Try You Tube & put that in there after you get to
the site
0helpful
2answers

How many quarts of transmissio fluid dose my 1997 mercury sable hold

Automatic Transmission, Total Fill
4 speed AX4S..........12.3 quarts
4 speed AX4N..........13.6 quarts
0helpful
1answer

1997 Sable wagon transmission range sensor location?

It is on the top of the transmission. has a large connetor going to it.
0helpful
1answer

I am having trouble finding the location of the speed sensor on a 1994 mercury sable 3.8 engine and need to find out how to replace it

I am looking for the sensor that controls the fan for the radiator. The item that controls the fan, and allows the fan to come on and off?????
0helpful
1answer

Where is a crank shaft sensor located in a 97 mercery sable 3.0 24v duratec v6 and what tools are needed to replace it

If you have the hood up, it is located on the left hand side. Farthest sensor to the left side of car. I have a diagram of location if you give me your email I will send you the diagram. [email protected]
0helpful
1answer

Where is the vehicle speed sensor located on a 95 mercury sable 3.0...please be very specific and a diagram or picture would be greatly appreciated.

It is in the end of the transmission on the top. Look where the passenger side CV shaft comes out and look back toward the drivers side from there. It is on top tucked under the rear exhaust manifold.
Not finding what you are looking for?

114 views

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...