Question about 2005 Nissan Maxima

1 Answer

I need to know where may I find the manual or instructions on replacing a 2005 nissan maxima wheel bearing?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Nissan Master
  • 5,332 Answers

The front wheel bearing is a pressed in bearing. It will require the services of a machine shop to press out the old bearing and press in the new one. What you will need to do is separate the knuckle from the front suspension of the car.

Remove the axle nut. Separate the outer tie rod from the knuckle. Remove the caliper and the rotor. Separate the lower ball joint from the knuckle. Remove the two bolts that hold the knuckle to the strut. Once the knuckle is free you can take it into a machine shop or some auto shops and have the bearing pressed in and out. I will add that it is also common for the front hub (the part that has the wheel studs in it) to wear out on these as well so don't be surprised if they tell you you need one.

Posted on Nov 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2009 altima. I hearing a roaring noise


In my 2005 Nissan Altima I experienced a roaring noise from the rear of the car. It ended up being the rear wheel bearings needed to be replaced. It appears that this is a common problem with Nissan Altima's & Maxima's of varying years even with fairly low mileage. This might be your problem.

May 13, 2014 | Cars & Trucks

1 Answer

Rear wheel noise


Rear hub bearing gone bad and will need to be replaced. Be safe and try not to drive the car on the highway till the hub bearing has been replaced.
Thank you for using fixya and be safe.

May 09, 2010 | 2005 Nissan Maxima

1 Answer

How to take out wheeel bearings on 2005 nissan maxima


give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Mar 13, 2010 | 2005 Nissan Maxima

1 Answer

How to replace a rear wheel bearing 1996 nissan maxima gle


  • Remove tire
  • Remove brake caliper assembly
  • Remove brake rotor
  • Remove hub cap
  • Remove cotter pin
  • Remove wheel bearing lock nut & washer
  • Remove wheel hub bearing from spindle
to install wheel bearing nut torque to 137 Ib to 188 Ib

Sep 26, 2009 | 1996 Nissan Maxima

1 Answer

Need instruction manual/schematics for replacing 2005 kia rio driver side rear wheel bearing. i've got the wheel/hub/bearing off, not the inside ring to the bearing. i need to know how to replace it .


clean all the grease if there is any out of the hub, turn the hub over and using a drift and hammer strike the shell from the back edge working around the shell as you go, should not take too much to remove it but you will need a bit more than a tap with the hammer.
Hope this has helped you

May 22, 2009 | 2003 Kia Rio

1 Answer

Humming sound when driving


hi there sounds if your wheel bearing is shot best way to find out is drive your motor & if you can either turn steering left or right when driving you will find that humming noise will probably disappear if it does then its your wheel bearing.

Jan 21, 2009 | 2005 Nissan Maxima

1 Answer

2005 nissan maxima cd player


Get yourself a Maxima service manual. It will give U instructions on doing alot of re[airs for the car, including taking dash apart.

Hope this ads your problem

Matt

Nov 06, 2008 | 2005 Nissan Maxima

1 Answer

Transmission problem


most likely you have a bad wheel bearing. It is very comen for a wheel bearing to go bad after an accident.

Jun 24, 2008 | 2004 Nissan Maxima

2 Answers

Front End Noise in 2005 Nissan, Maxima


it would not hurt to check rear tire wear due to misalignment
cupped tires will cause a faulty bearing type noise or humming.

Jun 15, 2008 | 2005 Nissan Maxima

Not finding what you are looking for?
2005 Nissan Maxima Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...