Question about 1993 Isuzu Trooper

1 Answer

I broke the frame behind the front tire and i keep fixing it but it keeps breaking how do i fix that

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,911 Answers

Look in the phone book under welding or fabrication. you need to get someone on it who knows what he is doing. and the thing is over 17 years old, there might not be enough metal left there to work with.

Posted on Nov 08, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you replace a 2005 pontiac vibe charcoal canister

Can't tell you where yours is exactly. But two spots that is most likely at. Under the car on the driver side, right behind the front tire mounted to the frame. Or on top of the fuel tank, You can see it, but have to drop the tank to get it out. I have never replaced one though. Fix them always. If the box is crack, I get a piece of plastic and silicone it on, over the crack. If the nipple broke off, I use a piece of copper tube, just a bigger than the hole. Heat it up, hot. Use pliers. Then insert it to the box and push the nipple on it at the same time. Do this quickly. Then smear silicone around the crack. keep the silicone close or you won't be able to get the hose connected back on.

Jul 27, 2015 | 2005 Pontiac Vibe

1 Answer

Body damage

first need to know model year. does it have the plastic wings or metal? if the tyre has been ripped off then there is going to be damage to the anti roll bar and other stuff. you also need to have it checked for line ment or it will just go all over the road and be a waste of money to fix. frame may be bent and when they are there is no way of fixing it indicator is held in from the inside of the wing behind the plastic wheel arch. just screwed in. depending on model year. some are just clipped in.

Oct 26, 2013 | Nissan Maxima Cars & Trucks

1 Answer

2000 VW cabio door locks stopped working

chances are you broke the 10cent pot metal piece ($30 at dealer) that attachs to the tumbler behind the scene where the key inserts and engages the locks. The good news if your handy you can fix this. The bad news is probably it will break again (from personal experience). To fix it --- simply disengage the alarm with your fob --- remove door panel (need a star wrench to remove the parts holding the panel) -carefully pry the outer panel of the frame --- peel back the plastic to acess the cavity of the door - - locate the broke piece and replace (make sure you keep track of the sequence, meaning take a picture of the unit befoe you start and as you dismantle it) hopefully this helps!

Dec 07, 2012 | 2000 Volkswagen Cabrio

1 Answer

Oil leak. I was told it was a front seal leak. is that expensive to fix?

not really just take front tire off remove the belts you gonna need a 36mm socket to remove the nut that holds the pulley from the harmonica balancer you need to keep it from turning the seal is behind there good luck

Aug 12, 2011 | 2002 Nissan Sentra

3 Answers

I'm changing the stabilizer bar and link bushings. The manual says to raise and support the vehicle, but does not say where to support the vecle at...the frame or the axle. Thanks for the help

You should support the vehicle from the frame. The most common support areas are just behind the front tires on the frame just below the forward most part of the front doors. In the rear just in front of the rear tires below the rear most part of the rear doors.
If you are just lifting the front of the jeep be sure to place blocks behind the rear tires to keep the jeep from rolling off of the jack stands and crushing you.
Remember to be careful and use caution when working under a vehicle.

Good Luck

May 20, 2011 | 1994 Jeep Grand Cherokee

1 Answer

My car is shaky every time i hit a stop light?

you should keep all four tires on the ground !!!! LOL ! your rotors or brake pads are bad. do you feel it shake in the steering wheel ? Check these three items and im sure it will fix.......1) jack front car up and try to move front tires in all directions, does it feel loose at all? if yes check tie rod ends, upper and lower ball joints. 2) check brake pads for wear, heat from pads warp the rotors and cause the break pedal and steering to shake or vibrate. 3) If nothing can be found wrong with the tie rods or ball joints i recommend changing the rotors and brake pads, a pretty cheap fix.

Jan 21, 2011 | 2005 Dodge Neon

2 Answers

Where is the condensor drain?? on a 1997 jeep grand cherokee

It's behind the glove box and actually comes out inside the frame.
It sounds like you maybe suffering from the common problem of the plugged condensation drain, if so let me know and I'll try to tell you how to fix it.

Jun 04, 2010 | 1997 Jeep Grand Cherokee

1 Answer

Broke to passenger tire off

The wheel is mounted to the A-frame assembly. It would be pretty tough to shear the axle without damaging the A frame too. Chances are that it and the axle will both have to be replaced. The good news is that it's not all that complicated. You'll (mostly) need a jack + stands, a good socket set, break-over bar and a manual. I prefer Chilton's but Haynes will do. Get the assembly used from a reputable salvage yard. The wheel is probably shot too, even if it "looks" OK. I could explain every little detail here but, it wouldn't be enough. You need the book. The pictures and diagrams will help the job be a lot less intimidating. You CAN do this. It's not rocket science although mechanics sure like to charge for this job like it is. Dedicate 2 full days and don't stop (meaning don't put it on the back burner) until you're done. It's a lot easier to remember your steps an hour later than a week later. Might go smooth and be done in 4-6 hours but don't depend on it.

Nov 26, 2009 | 2002 Mitsubishi Galant

2 Answers

Need to replace brake line from rear axle forward on a 1996 gmc sierra 1500 pu xcab. i need a diagram.

Chanses are it broke behind the gas tank wear it runs along the frame rail. You don't need a diagram to fix that, just unhook it at both ends and break it off or cut it off buy the tank and take the pieces with you to a auto parts store and they will match it up with new line, just take a tape measure and measure from the rear axel to the front block or perportioning valve, and don't worry about the piece behind the tank, just run the new line alongside the old one behind the tank unless you want to pull the tank out.

Sep 06, 2009 | GMC Sierra 1500 Cars & Trucks

2 Answers

I have a1996 ford aerostar and the air bag light keeps flashing how do i reset it


Jan 18, 2009 | Ford Aerostar Cars & Trucks

Not finding what you are looking for?
1993 Isuzu Trooper Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts


Level 3 Expert

75822 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides