Question about 2006 Chevrolet Uplander

Open Question

2006 Chevy Uplander sliding door will not stay closed, opens while driving, or when it does happen to close, the 'door open' alarm dings without stopping. Any ideas?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 82 Answers

SOURCE: 2006 Chevy Uplander. The power sliding doors won't shut

2 possible solutions. First clean the door pin contacts(multiple spring loaded pins on door side and matching plate on body) with a scotch pad until shiny gold color again. Second the rear edge of the door should be 1mm inside the body opening when closed. If those are correct it is going to take a software download from a dealer to the door control module to fix this. Otherwise you will have to pull the psd fuse and breaker from the right side dash fuse box.

Posted on Jun 23, 2009

  • 58 Answers

SOURCE: Chevy Uplander (2006) when sliding doors are

One or more of your sliding door may have lost their learned opened/closed position.Also the door may be binding,obstructed or need a latch adjustment.If a relearn is required return to a GM dealership as a diagnostic scan tool is required.

Posted on Oct 28, 2009

  • 7 Answers

SOURCE: the sliding door on 2006 chevy uplander will not

Remove the rubber seal at the bottom of the door. It is ONLY there for aesthetic purposes (I asked the dealership). They said that is common and this is what they do to fix the problem.

Posted on Apr 02, 2010

cansmo
  • 2431 Answers

SOURCE: Passenger automatic sliding door will

The rail it has a plastic bushing they are worn? you need to check them

Posted on May 08, 2011

canwoodjc
  • 3301 Answers

SOURCE: My 2005 Chevy Uplander has

check the buttons on the door assembly's ,, one is shorted , its getting stuck so the signal never stops sending , even with the car off you will get that signal for a short time, , you can check them by simply doing a continuity check on the little switches themselves, with the plunger out,, you should have a signal, with it pushed in, you should get no reading

Posted on Aug 11, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passager side rear autmatic door will not close


your wire has come off door inside the door try unpluging fuse or the noise alarm under dash you need to replace the wires inside the sliding door to get it to close right again they have got tangled some how and tore loose.

Feb 15, 2013 | 2006 Chevrolet Uplander

1 Answer

Can't stop automatic sliding door from opening and alarm from dinging


Pull the 15 amp fuse for the doors and go to manual open and close. Fixing the alignment only works for a short while. Remember to turn switches to manual .

Sep 18, 2011 | 2006 Buick Terraza

1 Answer

My 2005 Chevy Uplander has an alarm that indicates when the doors are not closed properly. The alarm has been randomly going off for several months, even though the doors are closed properly. Now the...


check the buttons on the door assembly's ,, one is shorted , its getting stuck so the signal never stops sending , even with the car off you will get that signal for a short time, , you can check them by simply doing a continuity check on the little switches themselves, with the plunger out,, you should have a signal, with it pushed in, you should get no reading

Aug 11, 2011 | Chevrolet Uplander Cars & Trucks

1 Answer

The sliding door on 2006 chevy uplander will not close just started happening today the back hook looks off not like the one on the other door


Remove the rubber seal at the bottom of the door. It is ONLY there for aesthetic purposes (I asked the dealership). They said that is common and this is what they do to fix the problem.

Mar 07, 2010 | 2006 Chevrolet Uplander

3 Answers

Power sliding door will not stay closed. once activated the door goes to the closed position then opens back up. how can this be corrected.


Option 1: where the metal contacts on the door meet the metal contacts on the panel, take a high-grit sandpaper and sand those contacts.
Option 2: ensure that there isn't any debris in the tracks that the doors slide on, both on top and the bottom. The vehicle is equipped with a safety sensor that won't allow it to close if something is in its path.
Also check the weather seals around the door for damage.

Jan 02, 2010 | 2006 Chevrolet Uplander

1 Answer

Chevy Uplander (2006) when sliding doors are closed and then van is put into reverse or drive, chimes begin nonstop inside of car. How do i stop them???


One or more of your sliding door may have lost their learned opened/closed position.Also the door may be binding,obstructed or need a latch adjustment.If a relearn is required return to a GM dealership as a diagnostic scan tool is required.

Oct 27, 2009 | Chevrolet Uplander Cars & Trucks

2 Answers

Chevy uplander sliding door sensor will not stop


Remove the PSD fuse, its on the inside fuse panel

Sep 17, 2009 | 2002 Chevrolet Uplander

2 Answers

Chevy uplander 2005 and there is a constant beeping that will not go away its constant ..it has to do with the sliding passenger door they say but how do i fix it?


That happens to me all the time!! I just pull over, put it in park, open both sliding doors halfway then close them. This always gets rid of the problem. It's happening because one of the doors isn't catching correctly when it closes and once u hit a bump or anything you will here the dinging.

Jun 28, 2009 | Chevrolet Uplander LS Cars & Trucks

5 Answers

2006 Chevy Uplander. The power sliding doors won't shut


2 possible solutions. First clean the door pin contacts(multiple spring loaded pins on door side and matching plate on body) with a scotch pad until shiny gold color again. Second the rear edge of the door should be 1mm inside the body opening when closed. If those are correct it is going to take a software download from a dealer to the door control module to fix this. Otherwise you will have to pull the psd fuse and breaker from the right side dash fuse box.

Jun 23, 2009 | 2005 Chevrolet Uplander

1 Answer

Passenger sliding door


clean the contacts on the door jam and the door itself

Robert

Feb 01, 2009 | 2006 Chevrolet Uplander

Not finding what you are looking for?
2006 Chevrolet Uplander Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...