Question about 2001 Chevrolet Suburban

1 Answer

Replaced rear wiper motor - but the new one does not work - tried another one but that wont work!!! checked both fuses in dash and engine compartment o.k ... I'm working on a 2001 chev suburban ... does anyone have any idea or diagrams I can work with????? rob

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Use a test light to see if there is even power going to the motor...then test if there is power going through th fuse...if there is power at the fuse but none at the motor then you have a broken wire that you have to trace... it is probably broken in the rubber gromit between the hatch and the body of the vehicle.

Posted on Nov 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My rear wiper isn't worker in my BMW x5 2004 do you think at the relay


F81 fuse in rear cargo compartment
F41 fuse above glove box
K11 module in E-box right rear engine compartment
If these all work replace the wiper motor.

Dec 16, 2016 | BMW X5 Series Cars & Trucks

1 Answer

2005. Why doesn't windshield wiper stop?


There's a switch on the motor; when you turn it off, it's going to continue till the wipers are in the "park" position. Possibly a ca or internal cam or detent activates a switch to stop rotating. You might need a new wiper motor if the position switch isn't external.

Oct 18, 2015 | Ford Ranger Cars & Trucks

2 Answers

Rear wiper stopped working


check power to motor and if it has power replace motor fuse locat

Jan 17, 2014 | 2004 Ford Expedition

1 Answer

My 2003 Toyota Sequoia liftgate window does not go up or down when i use the the switch on my drivers door or by using the key in the back door itself. There is no clicking sound or movement when I try at...


First make sure that the rear wiper is parked all the way down in the receptacle on the door, if the wiper is not down all the way for some reason the window will lock. Next check the motor itself by removing the rear inner panel and the metal plate, apply power from a 12 volt source directly to the motor, unplug it and ground one side and power to the other, the reverse connections if there is no response from the motor replace it, if the motor works this way a common problem is the back door ECU.

May 31, 2017 | 2003 Toyota Sequoia

1 Answer

My front wipers arent working, could it just be the fuse? if so which fuse do i change as the list only has my rear wiper on it.


Fuse nr.31, F31, (25A) = Windscreen wipers
This fuse is placed on fuse box / relay plate engine bay 1, under bonnet in engine compartment area!

If the fuse F31 is OK.
You must diagnose why windscreen wipers going slow and/or stopping.
In order to find out the cause of wipers stopping you can try follows:
1. Carefully extract the wiper arms from their axles (two pieces). In some cases you need to use an extracting tool. Heed of the windscreen !!!
2. Disassemble the plastic covers from the bottom of the windscreen.
3. With the bonnet up you can start the engine, (transmission in "N" or "P" position and parking brake on). Now you must switch on the control lever of the wipers, and go to the engine compartment. If the wiper motor runs let the wiper motor running for a few minutes and switch off. Go to the step 4. If the wiper motor do not runs you must check first the electrical feeding of the motor. It is necessary to unscrew three bolts of the mechanism and disconnect the electrical coupling (difficult assurance). If the electrical feeding is OK you must replace the motor - steps 5, 6, 7. If not you must check electrical connections, the control switch of wipers and electric cables.
4. Now you must check the two bearings of wiper mechanism with your hand. In the most cases the left bearing is out of order (is very hot). This is the most encounter fault of the wipers running at Audi.
5. For have enough space to manipulation the wiper motor together with their mechanism you must extract the plastic cover of the engine computer box, and extract also the box screws. Then you can move slowly the engine computer box, just for a few milimeters.
6. You must disconnect the electrical coupling of the motor (difficult assurance), unscrew three bolts of the mechanism and extract together with the motor. You must move them slowly between windscreen and engine computer box until the wiper motor go out together with the mechanism. This is the most difficult operation!
7. Now you can repair the bearings, replace entire wiper mechanism or replace the wiper motor. It is not very simply, but it works.
Heed of the windscreen !!!
Refit all in reverse order.

Jan 13, 2010 | 2006 Audi A3

1 Answer

Can know one solve the problem of the wipers on 96 plymouth voyageur why they will not come on the back one work fine have tried new motor new fuses and cant find the problem would appreciate if someone...


system should have a wiper relay in fuse panel,can a audible click be heard from dash area or arround fuse panel or exterior of firewall/engine compartment when wipers are turned on,if not locate relay (see owners manual) and check for power at relay with key on first then check for power out of relay when wiper switch is turned on,fuse should put power to relay when key is on,relay should put power to wiper motor when wiper switch is turned on

Oct 10, 2009 | 1996 Plymouth Grand Voyager

2 Answers

Rear wiper Ford Explorer 1998 won't work. Replaced motor and then found there was no power to connector at wiper motor. Fuses good both on fuse panel and power distribution box. Washer on wiper arm works.


Look for the fuse for the rear wiper motor is a 15 amp mini-fuse , in location # 8 of your POWER DISTRIBUTION BOX in the engine compartment. Check in the PD BOX for; - relay # 8 is the rear wiper down relay , and - relay # 10 is the rear wiper up relay .

May 17, 2009 | 2001 Ford Expedition

2 Answers

BMW 745I 2002 wiper dead


there are several things that can cause the wipers in your car not to work. if you have verified the fuses are good and verified power to your wiper motor, I would try disconnecting the negative battery cable for 15 minutes, then checking operation of the wipers. by the way, which fuses did you check?

Mar 24, 2009 | 2002 BMW 7 Series

1 Answer

2002 intrepid wipers


well check to hear if you hear the wiper motor working if you do look at the arm take the end cap off loosen the bolt if you here the motor running/tighten them bak up if you do not here the motor check fuse under the dash and inthe engine compartment and replace fuse or fuses/ please rate my response thank you very much

Jan 28, 2009 | 2002 Dodge Intrepid

Not finding what you are looking for?
2001 Chevrolet Suburban Logo

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...