Question about 1989 Honda CRX

1 Answer

Hi Could a Honda CRX EF7 1987 /1991 seat belt replace a Honda CRX Del VXI 1992 /1993 seat belt please your comments will be apprieciated thanx

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 95 Answers

There are two types of crx currently the gen 1 built thru 87, and the gen 2 from 88 thru 91. unless you count the Delsol as a CRX which it is but is'nt but has very simular parts.
Now the seatbelts you are asking about are either door mounted or chassis mounted. If they are door mounted you will need the factory mounted bolts from the doors of a factory 88 thru 91 crx and modified door panels to accept seatbelt as well as the fact that since the door is only a half door you will have to contened with ducking under the seatbelt to exit the car due to the fact that the seat belt will now be connected to the door instead of the chassis to ensure safty of the driver and passenger, Unless you were to fabricate a plate that could hold the top portion of the seatbelt attached to the door.
Now if it is a factory chassis mounted seatbelt look you want then now you have to think about bolt placement and look very cautiously at the mount to the chassis on the shoulder side to see if the bracket will interchange without any major modification but at this point it might be best to get a 5 point Simpson harness instead.
Anything is possible as long as you fallow thru with the thought of the safty of yourself and any other passenger you may have, Either way you will have some welding to do and some well thought out plans to accomplish your goal, Nothing is Impossible, unless you want to plan a "perfect" vacation out of state.

Posted on Nov 09, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have an imported Honda Del Sol CRX X Reg.

The ignitor inside the dizzy needs replaced and check the VSS module on the back of the clocks. Funky power can do you clocks.

Nov 03, 2009 | 2004 Mazda MX-5 Miata

1 Answer

I have an A1 transmission in my car ...the clutch just went out and i cant find **** about it ...can someone please tell me some info about the clutch that goes in it ..its a 1994 honda civic del sol b16a...

212 spine. It depends there are three different types. You need to pull it out and check to order a new one. eBay has loads once you know whch one it is either 19,20 or 21mm.

Vote for me :)

Oct 12, 2009 | 1990 Honda CRX

1 Answer

1989 honda crx 1.5 automatic won't start. Replaced igniter, distributor, rotor plugs,wires,engine turns but will not start

Check the timing belt or check the most common item, the Main Relay. It controls spark and fuel.

Sep 27, 2009 | 1989 Honda CRX

1 Answer

1989 Honda Civic hard starting and dies for no reason. Cooling fans not working. Trouble codes are #6 coolant, #10 air intake temp, #16 fuel injector. Can anyone lead me to a solution for these problems?

Accord Civic CRV CRX Del Sol Odyssey Prelude
85-98 86-98 97-98 85-91 93-97 95-98 85-98 ECT Sensor (Engine Coolant Temperature)
defective circuit or unplugged / defective sensor
Accord Civic CRV CRX Del Sol Odyssey Prelude
85-98 86-98 97-98 85-91 93-97 95-98 85-98 IAT Sensor (Intake Air Temperature)
defective circuit or unplugged / defective sensor
Accord Civic CRV CRX Del Sol Odyssey Prelude
90-95 88-95 n/a 88-91 93-95 95 88-95 Fuel Injector System
defective circuit or unplugged / defective fuel injector

check your wiring for dirty connections or broken wires, you may have wires that are rubbed through or connectors that are not making full contact. you will need an ohm meter and check wires for continuity. a wiring diagram will be needed.

May 15, 2009 | 1989 Honda Civic

1 Answer

Car wont start

Check the Belt and Belt Tensioner. If the Tensioner is not keeping the Belt tight it will cause the Problems Stated above. Please Rate my Solution, I Need all the Help that I can get! Thanks!

Jan 26, 2009 | 1989 Honda CRX

1 Answer

1989 honda crx

If you haven't had the distributor out then turn the cam so the rotor points to No.1. Then yiou should see some marks either lining up or close to it.
If you have had the distributor out, set the cam and then worry about the distributor.
Some engines have more than one possible location for the cam gear. I'm not 100% about Hondas so I can't comment either way. Sorry.

Jan 04, 2009 | 1989 Honda CRX

Not finding what you are looking for?
Cars & Trucks Logo

164 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

79847 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides