Question about 1990 Nissan 300ZX
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
pull the transmission. remove the torque converter (automatics) or clutch and pressure plate (standards), the bolts for the flywheel are under that. make sure you replace the flywheel with the proper one especially if it's a standard.
Posted on Sep 02, 2009
Testimonial: "My car is a manual. Are the instructions the same? And can you be clearer and give me step by step what to do, please? Don't want any mistakes Thanx"
Are you sure the new belt didn't jump time? How was the belt tensioner when you replaced yhe belt? Did your water pump leak onto or into your crank sensor?Are you sure you have proper fuel pressure?When you replaced the timing belt, did you make sure to find top dead center on cylinder 1 ? Just lining up the timing marks may not have worked if this is indeed what you did.If you had the crankshaft rotated 180 degrees, your motor would be trying to fire on the exhaust stroke, instead of the compression stroke. To find T.D.C. disconnect your battery,rotate your crankshaft until the piston that is marked #1 in your firing order is at the top of its stroke, this can be accomplished by carefully inserting a wooden or plastic dowel into the sparkplug hole of cylinder#1. The dowel will rise with the piston and at the point where it starts to fall will be T.D.C. Now your timing marks should line up,and you will then be on the compression stroke. good luck! hope this helps
Posted on Feb 14, 2010
Tips for a great answer:
Oct 24, 2014 | Cars & Trucks
Oct 23, 2013 | 1988 Mazda RX-7
Apr 17, 2011 | 1997 Mitsubishi Eclipse
Oct 25, 2010 | Volvo S40 Cars & Trucks
Jul 30, 2010 | 1992 Volvo 940
Nov 11, 2009 | 1987 Toyota 4Runner
Oct 16, 2009 | 1989 Plymouth Sundance
Apr 26, 2009 | 1995 Mitsubishi 3000GT
160 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: