Question about Mitsubishi Eclipse

1 Answer

I have a mitsubishi eclipse rs 1995 the clutch goes all the way in and its hard to shift gears, how can i fix it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 8,210 Answers

This is usually caused by air entering the hydraulic clutch system after the fluid in the reservoir has leaked out of the slave cylinder. Check the fluid level and if low check the slave on the transmission for a leak. If leaking, replace the slave cylinder aqnd bleed the system. If this is not the problem or you have questions/need instructions, please let me know.

Posted on Nov 08, 2010

  • kareandjeff2 Jul 26, 2011

    i am having the same problem in my 2000 eclipse. could you please tell me how to bleed the system?

  • Jeff Turcotte
    Jeff Turcotte Jul 26, 2011

    To bleed, have an assistant operate the pedal for you while you open and close the bleeder on the slave. Use a catch pan or clear tube and catch bottle on the end of the bleeder. Loosen the bleeder and have your assistant push the pedal down and hold it down until you close the bleeder. The pedal may need to be lifted. Loosen the bleeder again and repeat the process until no air comes out in the fluid. Make sure to keep the reservoir full during this process.
    Check the clutch for proper operation with the engine running. If the pedal is too soft, back bleed the slave as follows:
    Grasp the end of the plunger using a vice grip. Open the bleeder, leaving your wrench attached. Force the plunger into the slave, and close the bleeder while holding the plunger in. Repeat this process until no bubbles come out of the slave.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my 1995 eclipse rs auto shift from 2nd


You used a code to replace a part

Codes only indicate a system with a fault

That system then has to be component tested

I assume you did no testing

Dec 09, 2012 | 1995 Mitsubishi Eclipse

1 Answer

My 2000 mitsubishi eclipse will not shift into gear, at all.


if it sat for a while the disc could have rusted to the flywheel

Mar 28, 2012 | 2000 Mitsubishi Eclipse

2 Answers

I have a 97 eclipse RS and when i went to push the clutch pedal in it doesnt wanna open or release, it wont go into gear...


check the clutch master cylinder to be sure it has fluid in it... then check the clutch slave cylinder to be sure it is moving freely.

Aug 21, 2011 | 1997 Mitsubishi Eclipse

1 Answer

I have a mitsubishi eclipse 2001 rs, i seem to be having a problem with my clutch. or so i think it is my clutch i have had the clutch fluid blead. though i have no problem putting it in gear but when i...


Sounds like the clutch assy is about worn out. Most hydraulic clutches are self adjusting so when the clutch disc lining wears thin it takes more pedal travel to engage.

Feb 05, 2011 | 2001 Mitsubishi Eclipse

1 Answer

It wont start got new bat. no noise wen trying to start


if stick shift check the clutch pedal switch
if automatic try cranking while shifting through the gears
often the shifter linkage is out of adjustment

Sep 06, 2010 | 1995 Mitsubishi Eclipse

1 Answer

Fuso manual transmission hard shifting in first and second gear?


May need a clutch adjustment or not enough gear oil in in the tranny or worn shift forks.

Mar 25, 2010 | 1996 Mitsubishi Eclipse

1 Answer

Im having trouble shifting gears in my 2001 mitsubishi . had the gear box fluids checked and its fine. ******* down gear is hardest. it acts as if it wants to stick.


Get your clutch checked, if you don't have a good functional clutch it makes shifting very hard and in long term will damage your gearbox.

Feb 09, 2010 | 2001 Mitsubishi Eclipse

3 Answers

Teenager has worn out clutch in 1995 eclipse, again!!


common problem with people that do not let out the clutch at lights and put it in neutral. they sit at the light with the clutch pushed in. it wears out the clutch springs and burns the clutch.

Aug 19, 2009 | 1995 Mitsubishi Eclipse

1 Answer

Noise from transmission area


Sounds like the clutch through out bearing might be bad.Is it hard to shift?Does the pedal come up high befor the clutch engages?

Mar 29, 2009 | 2000 Mitsubishi Eclipse

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...