Question about 1994 Dodge Intrepid

Open Question

A frame rackapina kit easy to replace what to look out for what to expect

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is fuel filter


the filter is located on the driver side just in front of the rear wheel. in between the frame and the fuel cell. A plastic cover hides the filter, the cover is about 12 inches long and just pops off. very easy to change, just push in the blue clips and pull the lines off, expect a little fuel.

Jan 19, 2011 | 2003 Ford Expedition

1 Answer

Wiring for trailer lights


There is usually a Kit in a plastic package that comes with the truck. You may find the kit in the Jack sleeve under the Passengers front or rear seat. This Kit can have additional Flashers that go under the hood in a relay box, and a wiring "Stub" for Electric brake controls. They fit multiple applications.

My 1999 had a connector under the dash for Electric brakes if you are going to use them. You can check for a wiring loom under the rear frame of the truck, most come prewired. If you are going to need to add the actual plug-in, the newer Ford products have a dual fixture plug which can take anything.

Tractor Supply is good for aftermarket trailer accessories and if you want Factory parts and need wiring too there are bigger kits at the Dealer. The correct gauge wire is important.

Ideally, you could find a truck in a Salvage Yard, wrecked in the front or bad engine, with the bed missing. Then it would be easy pickings to strip the frame. Really would not matter if it was a Crew cab as you can bundle the slack.

Look under your truck for extra wiring, you may just need the Plug.

Sep 26, 2010 | 2002 Ford F250 Super Duty SuperCab

1 Answer

Rear air suspension will not inflat rear of vehicle sagging sitting on frame front works need diagram of which relay(s) that may not be working. switch under glove box is on.


All those airbag rear ends die someday and the price to fix them exceeds the value of the car. It is some kind of cruel joke played on folks who expect more than 3 years out of a car. There is a canadian company called strutmasters.com, They can sell you a kit for replacing the whole collection of airbag **** with a real rear suspension which does not deflate. It is not free and I imagine the labor is going to be more than a day. So look up the price of the kit for your car and make a judgment as to how much you are willing to spend. Otherwise sell it for parts.

Sep 13, 2010 | Lincoln Navigator Cars & Trucks

1 Answer

How do you change the fuel filter on the frame of a 2006 f250 gas truck


It is located under driver rail around front door u will need filter wrench or crecent to remove cover and replace will have some fuel spillage and make sure to replace o ring provided wth filter. there is also filter under hood by oil filter both filters come with kit around 50 for kit

May 15, 2010 | 2006 Ford F-250 Super Duty

1 Answer

How do i lift a 1991 gmc sonoma that has coil spring front end with the a arms on top of the frame


check with a company called fab-tech they make some pretty good lift kits for 2wd baja rigs. I have bought one of there kits before and made my own. but I like how easy it was to install and function nicely

Mar 11, 2010 | 1991 GMC Sonoma

1 Answer

Sway bar


Incredibly easy. Two bolts hold each sway bar bracket to the frame, the bushing is inside. The end links are a bit trickier, however, not rocket science.

Jan 16, 2010 | 1996 Jeep Grand Cherokee

1 Answer

Are the lower ball joints rivited in the a frame or pressed in? I do not want to pay for a answer.


I cant be positive, but I wanna say that on that truck they are riveted in. again, im not 100% sure about that. but if your looking to replace them, there are aftermarket replacement kits that are designed for the ball joint to be bolted in. all you would have to do is drill or grind off the rivets if they are there. its pretty easy to check though. just peek under your car just inside the front tire. you see the 2 arms that connect the whole tire/spindle assembly to the frame? well, check the lower one at the end closest to the tire. you should see right away if there are bolts or rivets.

Aug 08, 2009 | 1999 Dodge Durango

2 Answers

Were is the fuel filter on a 2005 chev silverado 2500hd


GM used to put them on the frame rail under the truck, I understand that 04 and newer the filter is in the tank as part of the pump assembly.

Jul 13, 2009 | 2005 Chevrolet Silverado

1 Answer

How do you replace the motor for the driver's side window?


pull the door panel off and youll see where the window motor is . it usually is reveted to the frame drill the revets out and youwill be able to pull the motor out. sometimes you can buy a rebuild kit for them. inside the motor there are three plastic peices the get eaten up the rebuild kit has these pieces and it is pretty easy to fix. if you hear the motor working but the windows dont go up of down you may be able to do this type of fix if not then you have to buy a knew motor

Dec 01, 2008 | 2001 Ford Windstar

1 Answer

How to replace side mirror glass and frame ? 2002 Chevy astro van


It should snap out and the new one snap in. Most auto glass companies can order just replacement glass from burco mirror. http://brokencarmirror.com/replacement/mirrors/

Nov 06, 2008 | 2003 Chevrolet Astro

Not finding what you are looking for?
1994 Dodge Intrepid Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...