Question about 2002 Land Rover Freelander

Open Question

Head bolt tensions 2002 freelander 2.5 V6 - 2002 Land Rover Freelander

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 118 Answers

SOURCE: NEED TORQUE SPECS AND SEQUENCE FOR 02 DODGE 2.4 V6 STRATUS

  1. Tighten bolts in sequence shown in (Fig. 23), using the following steps and torque values:
    • Step 1: Bolts 1 - 8 to 48 Nm (35 ft. lbs.)
    • Step 2: Bolts 1 - 8 to 75 Nm (55 ft. lbs.)
    • Step 3: Bolts 1 - 8 to 75 Nm (55 ft. lbs.)
    • Step 4: Bolts 1 - 8 to +90° . Turn Do not use a torque wrench for this step.
    • Step 5: Bolts 9 - 11 to 28 Nm (250 in. lbs.)
  • I tried to send a pic of the head bolt numbers but it wont let me so e mail me dbern002@att.net have a good day DB

Posted on Feb 01, 2009

Ad
bunnydawg
  • 5158 Answers

SOURCE: What is the approximate cost of replacing a head gasket of a 2002

best bet would be to go here http://www.kbb.com/
select the details and options and roughly the milage and it will give you a price for three conditions of the vehicle

Robert

Please take a moment to rate this solution thanks

Posted on Feb 01, 2009

stevenhurc
  • 450 Answers

SOURCE: head bolt tension setting

these specs straight from service info
single cam
25Nm + 70deg+ 70deg+ 30deg
twin cam
25Nm+70deg+70deg+ 30deg

alot of after market gasket sets are the 25Nm and 3 lots of 60deg and the extra 10deg bolts are meant to be replaced (use once only) alot of bolts tend to start stretching when doing last 10 deg use oil on threads and washers under bolts 25 and 3 lots of 60deg is correct and more commonly used.

Posted on May 28, 2009

carlsbiz
  • 1124 Answers

SOURCE: release tension on serpentine belt 97 olds

Te bolt on the tenssioner..
Put the correct size closed end wrench on it.. A long one is best for leverage.. Push the wrench in the direction that would losten the belt.. It does take quite a bit of muscle..
You may want to write down the path of the belt before you loosen it.. When loosened - it can slip off other pullies..

Posted on Sep 24, 2009

  • 72 Answers

SOURCE: timing marks, head bolt tension.specifications

Hi, I have a daihatsu rocky and the best source of information for Daihatsu has come from a site called WARFS.ORG when you go to the site you will see that there is a link for diahatsu help Leon is the US rep for them and the man knows more about daihatsu's than anyone on the planet.I hope this helps you good luck and keep that daihatsu running !!

Posted on May 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Oil leaks from a freelander 2002 V6 2.5L engine block. I am told dorman Cup expansion plug/freeze plug spoiled. How do I solve this problem?


where exactley is it comming from is it from the rocker cover or the sump either way a new gasket will be needed check hoses around the carbs as well and cylinder head as gaskets can go but not all together but you get oil seaping out of cylinder head hope this helps ivan

Sep 25, 2012 | 2002 Land Rover Freelander

1 Answer

I need head bolt torque specs. for a 2002 ford f150 v6


Torque Specifications for Ford 4.2L-256ci-V6
These bolts are torque and turn procedure!
STEP 1: 14 FtLbs STEP 2: 29 FtLbs STEP 3: 36 FtLbs STEP 4: LONG Bolts Loosen 3 Turns - re-torque to 33FtLbs STEP 4: SHORT Bolts Loosen 3 Turns - re-torque to 19FtLbs STEP 5: ALL Bolts +180deg turn

Aug 05, 2010 | 2002 Ford F150 Regular Cab

1 Answer

Have no timing marks and has come to me in kit form freelander v6 costumer tryed to do head gaskets themselves and cant put back together. wish i had never taken job on,


copy and paste this adress for pictures of timming mark tools this should show you where they line up.: http://i244.photobucket.com/albums/gg22/workaholic_ro/rover/0000.jpg

Nov 24, 2009 | 2002 Land Rover Freelander

3 Answers

I can only find three spark plugs on my freelander v6 engin


Remove
  1. Disconnect battery earth lead.
  2. Remove engine acoustic cover.
  1. RH bank only: Release locking clips and disconnect multiplugs from plug top coils.
  2. RH bank only: Remove 6 bolts securing plug top coils to RH camshaft cover and remove coils.
  1. LH bank only: Noting their fitted positions, disconnect ht leads.
  2. Using a 16 mm plug socket, remove spark plugs from both cylinder heads.
Refit
  1. Set gap of each new spark plug to 1.00 mm .
  2. Fit spark plugs and tighten to 25 Nm (18 lbf.ft) .
  3. LH bank only: Connect ht leads.
  4. RH bank only: Fit plug top coils to spark plugs.
  5. RH bank only: Fit bolts securing plug top coils to RH camshaft cover and tighten to 9 Nm (6.5 lbf.ft) .
  6. RH bank only: Connect multiplugs to plug top coils and secure with locking clips.
  7. Fit engine acoustic cover.
  8. Connect battery earth lead.

Jun 04, 2009 | 2003 Land Rover Freelander

1 Answer

'04 LR Freelander - rear seat belt tensioned/stuck


un bolt to remove tension, pull some of the belt out and rebolt.

Mar 03, 2009 | 2004 Land Rover FreeLander

1 Answer

LAND ROVER FREELANDER 2002 V6 MOTOR GAS MOTOR


there are 3 timing belt in the v6 model. next time make sure to make marking before removing the belts.

Nov 10, 2008 | 2002 Land Rover Freelander

1 Answer

Easiest wat to change thermostat on freelander v6 es


there isnt any easier work , these are a burden of my life lol , the manifold is not to bad to remove , take your time when refitting and make sure you dont over tighten manifold bolts

Oct 07, 2008 | 2002 Land Rover Freelander

Not finding what you are looking for?
2002 Land Rover Freelander Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...