Question about 2001 Jeep Grand Cherokee

1 Answer

Hi i am trying to change the original passenger head light assembly in my 2001 jeep grand cherokee now from what i can see there is one long bolt, and thats all i can see the battery and everything else is right in the way i was wondering if i should just yank it out or are their more screws bolts holding it in, thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

No there is only 1 long bolt and it is just clipped in so you can pry it with a screwdriver carefully and it will pop out

Posted on Nov 07, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the radiator relay switch in 2001 jeep cherokee grand laredo

under the passenger head have to remove the grill and remove the passenger side of the front nose cover....pain in the ****.....simple way...remove passenger headlight and cut a 3 inch circle out of the of where the bottom of the headlight sits.....and the relay is mounted to the inner fender ....a dremel tool works perfect.....

Sep 18, 2011 | 2001 Jeep Grand Cherokee

1 Answer

How do i change the headlight on a 2004 jeep grand cherokee ... passenger side low beam

o.k you need to take out the seven millimeter bolt near the center top of the assembly ... then take a good size flat head screwdriver in behind the whole assembly and with a quick motion pop the assembly forward with the screwdriver and it will pop out forward

Apr 26, 2010 | 2004 Jeep Grand Cherokee

2 Answers

How to remove jeep grand cherokee head lamp assembly

Review this guide of the process:
- Jeep WJ Service Repair Manual Section 08La Lamps (page 13, fig. 2)
- WJ 1999-2004 Jeeps - Exterior Lamps Removal

I hope help you with this. Good luck (remember rated this help).

Oct 06, 2009 | 2002 Jeep Grand Cherokee

2 Answers

Where is the radiator fan relay switch located

the radiator fan relay is located under the passenger side head light,you will need to remove the grill and front bumper cover and of course the head light assembly,there are a few screws in the passenger side wheel well that need to come out also that hold the bumper cover on,most of the bolts holding the bumper on are torx ,hope this helps

Sep 08, 2009 | 2001 Jeep Grand Cherokee

1 Answer

I have a Jeep Cherokee Laredo 2001. The check engine light is on and I have been told that the computer is diagnosing the problem as a misfire in the cylinder. I went out to try and change the spark plugs...

assuming this is a 4.0 liter engine it doesnt use plug wires any uses a coil pack. this runs down the passenger side of the engine and the plugs are under it. 4 13mm headed bolts hold the coil pack to the engine assembly

Feb 01, 2009 | 2000 Jeep Cherokee

1 Answer

How to replace head light bulb in 2001 grand cherokee?

Pop the hood and look at the top of the headlight capsule. you should see a single 7mm bolt somewhere in the middle. remove the bolt completely it should be about 6 inches long. once the bolt is removed then use a large flat screwdriver and carefully pry the headlight capsule out from it retaing clips. once the capsule is out then you have 100% access to the bulbs

Jan 14, 2009 | 2001 Jeep Grand Cherokee

1 Answer

How do you get to the front passenger blinker to change

on the 2004 grand cherokee, you have to remove the bolt that hold the light in. if you open the hood and look at the headlight, there is a bolt that go all of the way through the headlight, remove it and gently pull out on the whole assembly.

Dec 17, 2008 | 2004 Jeep Grand Cherokee

1 Answer

Changing 1997 jeep grand cherokee head light assembly

You have to remove the grill and yu will see mounting screws. Consult the haynes manual for a picture.

Dec 12, 2008 | 2001 Jeep Grand Cherokee

1 Answer

Break light is out

This is the corrective method for your brake lights not working when your headlights are on(2000 Jeep Cherokee Larado).
1) The cause of the problem is heat from the bulb.
2) Remove the light assembly as if you were going to change a bulb.
3) Turn the socket and remove it from the taillight assembly and set it aside(check to be sure your bulb is not burnt out).
4) Look at the opening, you will see 3 flat chrome colored contacts on the assembly.
5) Notice the one by it self at the top of the opening, that is the "ground".
6) If you look closely you will notice the plastic around the ground contact has shrunk a little bit, this caused the contact to pull away from the socket, causing the problem.
7) With a small flat head screwdriver, VERY GENTLY pry up the contact so it stays slightly upward by itself.
8) Re-insert the bulb assembly back into the housing and press your brake petal with your lights on.
9) You should be in good to go!
10) Tools: Phillips head screwdriver and a small flat head screwdriver.
11) Time : 5 minutes per light

Nov 24, 2008 | 2001 Jeep Grand Cherokee

2 Answers

Electric fan not working

The fan relay is in a wierd spot. I had to drop the bumber and take my passenger head light, then pull out the battery and the assemly to hold it up. That is the only way to see it bolted on the frame below the head light on the passenger side. I changed it but my problem the whole time was the fan. Don't just by the motor though, for some reason they never hold up after taking them apart. Best to buy the whole assembly if you have to replace it.

Oct 17, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2001 Jeep Grand Cherokee Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides