Question about 2001 Chevrolet Cavalier

2 Answers

Cylinder head removal 2001 2.2L chevy cavalier stuck at fuel rail

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Un bolt the fuel rail. the injectors are pressed in for o rings are the seal for them and the pull right out

Posted on Nov 07, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Why would my car be over heating from my plugs

Posted on Jan 25, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

03 3.7 have new o rings for bottom of injectors do you put it on the head first or on the injector just put head gaskets on jeep


old post but see it asked many times.
assemble the rail first, its 1 piece so must be ready first.
3.7L Engine (FSM) RTM?
(1) If fuel injectors are to be installed, refer to Fuel
Injector Removal/Installation.
(2) Clean out fuel injector machined bores in
intake manifold.
(3) Apply a small amount of engine oil to each fuel
injector o-ring. This will help in fuel rail installation.
(4) Position fuel rail/fuel injector assembly to
machined injector openings in cylinder head.
(5) Guide each injector into cylinder head. Be careful
not to tear injector o-rings.
(6) Push right side of fuel rail down until fuel
injectors have bottomed on cylinder head shoulder.
Push left fuel rail down until injectors have bottomed
on cylinder head shoulder.
(7) Install 4 fuel rail mounting bolts and tighten.
Refer to torque specifications.
(8) Install 6 ignition coils. Refer to Ignition Coil
Removal/Installation.
(9) Connect electrical connectors to throttle body.
(10) Connect electrical connectors at all fuel injectors.
To install connector, refer to (Fig. 37). Push connector
onto injector (1) and then push and lock red
colored slider (2). Verify connector is locked to injector
by lightly tugging on connector.
(11) Connect necessary vacuum lines to throttle
body.
(12) Connect fuel line latch clip and fuel line to
fuel rail. Refer to Quick-Connect Fittings.
(13) Install air box to throttle body.
(14) Install air duct to air box.
(15) Connect battery cable to battery.
(16) Start engine and check for leaks.

Oct 07, 2014 | Jeep Cars & Trucks

1 Answer

What is making my 1996 Chevy Cavalier shake?


well there is a few things that can cause this problem common problems with the cavalier v6 and 4 cylinder is head gaskets and intake leaks look for signs of antifreeze leaks could be the ignition modual under the coil pack spark could be weak another thing thing u could do is clean the injectors the rail could be dirty and you mite not be getting the proper amount of fuel under load there is other things to check and double checking the plugs for gap and possible crack wouldnt hurt

Jul 10, 2012 | Chevrolet Cars & Trucks

1 Answer

96 cavelier the o ring on the fuel rail is leaking gas do i need to releave the presuure first, or?


Most definitely, relieve the pressure before removing the fuel rail from the cylinder head and removing the injector from the rail along with the o-ring.

Nov 08, 2010 | 1996 Chevrolet Cavalier

1 Answer

What is the proceedure for putting seal kits into electronic fuel injectors for 93 chevy cavalier


Remove the fuel rail along with the injectors attached to it. Remove the old seals. Clean the injector are very well with a solvent. Apply Vaseline to the seal mounting area on the injectors. Install the seals and coat them with Vaseline
Install the fuel rail and your done

Jun 23, 2010 | 2003 Chevrolet Cavalier

1 Answer

Where is my fuel regulator on my 91 cavalier


Along the reaer or the motor on the top is the fuel rail. It has the four injectors with their respective wiring harnesses. They all look identical. On the driver's side of the fuel rail is a metal cylinder standing vertically and suspended by the fuel rail mounting bracket. the fuel connection come out of the bottom and a vacuum lines is attatched on the top. I believe you need a T-27 torx bit to remove it.

Apr 06, 2010 | 1991 Chevrolet Cavalier

2 Answers

How to replace fuel injector 97 cavalier 2.2L


Normal 0 MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman";} 2.2L engine

Disconnect the negative battery cable.
Before servicing any electrical component, the ignition key must be in the OFF or LOCK position and all electrical loads must be OFF, unless instructed otherwise in these procedures. If a tool or equipment could easily come in contact with a live exposed electrical terminal, also disconnect the negative battery cable. Failure to follow these precautions may cause personal injury and/or damage to the vehicle or its components.
Remove the air cleaner outlet resonator mounting screw.
Disconnect the air cleaner outlet resonator clamp at the throttle body.
Remove the air cleaner outlet duct from air cleaner outlet resonator and air cleaner assembly.
Disconnect the crankcase vent hose clamp and the crankcase vent hose from the top of the engine.
Remove the air cleaner outlet resonator.
Remove the fuel rail bracket.
Remove the fuel injector electrical connectors by pushing in the wire connector clip and pulling the electrical connector away from the fuel injector.
Remove the fuel feed inlet pipe quick connect.
Remove the fuel return pipe from the fuel pressure regulator.
Remove the fuel rail attaching bolts.
Remove the fuel rail assembly from the cylinder head.
Remove the fuel injector retaining clip.
Remove the fuel injector.
Important Visually inspect the fuel injector to see if the upper O-ring was also removed, if not, remove the O-ring from the fuel rail assembly

Oct 26, 2009 | 1997 Chevrolet Cavalier

1 Answer

Fuel rail


If you have one it looks like an A/C charge port. the rail isn't very big if you don't see it it's not there!

Mar 17, 2009 | 1993 Chevrolet Cavalier

Not finding what you are looking for?
2001 Chevrolet Cavalier Logo

Related Topics:

537 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...