Question about 2004 Ford Ranger

1 Answer

I changed the battery in my Ford Ranger and the security icon keeps flashing and there is no power to turn the truck on

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 6,826 Answers

Oops. Sometimes when the battery is changed, the user should put a memory saver inserted into the cigarette lighter to save radio presets and more importantly security information in the computer.

Maybe, have to take to dealer to have key(s) reprogammed to the vehicle.

Also, check that there isn't some other aftermarket fob that needs to be inserted before the truck can be started.

Also, make sure that the battery connections are clean and tight on the new battery.

Posted on Nov 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Had to replace fuel pump relay on 2003 Ford Ranger. Now it won't turn over.Checked all fuses and battery. Could it be anti theft system? Where's valet switch?


Do you mean it wont cranck if so check if you have power on your starter if not change ignition key but before check battery and circuit good luck

Apr 15, 2017 | Ford Cars & Trucks

1 Answer

2002 Ford Ranger lights blink and radio light blinks when truck is turned off


it may be shorted or accidentally wired to the security flashing light on the dash board

Mar 02, 2015 | 2002 Ford Ranger

1 Answer

I have a 99 ford ranger that I changed all the fuses in and now it won't start. I'm assuming it's because of the anti theft, but I don't know what to do from here. Any help or suggestions would be muc


If the security system is at fault, the security light should be flashing or staying on.
Do the warning lights come on the dash when you turn the key on ? Can you jumper the starter relay and make it crank ?

Feb 09, 2014 | Cars & Trucks

1 Answer

Ford Ranger radio wont work


You need to enter the ford audio units security code into the audio unit. Because the battery was out for a long time, the audio unit has forgotten its security code. The code is in the manual that came with the car.

Dec 20, 2013 | Cars & Trucks

1 Answer

I have changed my battery starter and ignition swith but my 2001 ford ranger will still not turn over


Have you checked the circuit between the key switch and starter for power ?
The problem could be the security system or the neutral safety switch.

May 12, 2013 | Cars & Trucks

1 Answer

2001 ford ranger no power to starter when you turn the key. all other power works, changed starter new battery


You have shorted a wire to earth. check that you have the small wire on the correct terminal on the starter solenoid

PLEASE RATE THIS REPLY FOR ACCURACY

Mar 24, 2013 | Cars & Trucks

1 Answer

My 91 ford ranger won't turn over changed the


ae you have a bad connection on your bad connection clean the battery terminals

Sep 11, 2011 | 1991 Ford Ranger Supercab

3 Answers

I have ford ranger 2003, 2.3L manual transmission. Ileft it parked for about 2 wks and came to start but never crank at all, all ignition are "ON", battery is very strong fully charge. When I pressed the...


start the ranger with a test check the power at the starter when you start it on the starter the big wire always power the little one supposed to have power when you start the truck if you have no power go at the cluch there a switch check it if power go thrue or jump it with a wire let me know pierre

Jan 28, 2009 | 2003 Ford Ranger Regular Cab

Not finding what you are looking for?
2004 Ford Ranger Logo

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...