Question about 2000 Ford Econoline

1 Answer

Where is coil no.5 was told cylinder 5 was misfiring bought coil but not sure which is no. 5

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 5,332 Answers

5.4 liter?
Drivers front cylinder
1-2-3-4 on the passenger side, 5-6-7-8 on the drivers side

4.6?
drivers front cylinder
1-2-3-4 on the passenger side, 5-6-7-8 on the drivers side

4.2?
driver middle cylinder
1-2-3 on the passenger side 4-5-6 on the drivers side

Posted on Nov 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Ford Escape engine missfire


that sounds like those cylinders injectors might be the problem . When an injector over fuels or fails to supply fuel it would create a misfire just like if a plug or coil failed

Aug 01, 2016 | 2004 Ford Escape

1 Answer

What causes engine misfires to stay after new plugs and coil packs?


Try swapping the coil packs around - like swap #1 with #2, and swap #6 with #5, see if the misfires MOVE with the coil packs swapped to the new cylinders or if they stay with the cylinders. If they move with the coil packs, the new coil packs are bad. If they stay with the cylinders, there's a problem with those cylinders. You DID replace that camshaft sensor, right?

Have you checked your #1 and #6 injectors?

Aug 07, 2014 | BMW 528i Cars & Trucks

1 Answer

How do i replace the wire harness connector that clips to coils on jeep liberty sport 6v 3.7l


It's pretty basic on this. Test your clip by plugging it into the coil first, and make sure that it is the correct one. If yes, you need to simply cut the old plug off and connect the wires to your new one (in the right order) with a simple but connector sold at any auto shop/parts store or electrical shop.

Jan 08, 2014 | Jeep Liberty Cars & Trucks

1 Answer

My 1990 f0rerunner idles well but zero power from standing start or uphill, several people have told me it is only running on 5 cylinders. Is that possible


yes it is, you could have a cylinder misfire or a "dead hole" first things first do a compression check (remove coil wire, pull spark plugs one by one insert compression tester and bump starter till gauge registers) im not sure on your toyota but in general you need to be in the 140-200psi range, it just depends on the motor. once all the cylinders check out for compression then you need to find out why the cylinder is misfiring. make sure plugs and wires are in good shape, check cap and rotor, and finally check the coil. i recommend purchasing a chilton service manual, its only around 15-20 bucks and will save you alot of headaches

Mar 14, 2012 | 1990 Toyota 4Runner

1 Answer

My 1999 crown victoria is misfiring at high speeds even after i changed all coils and put the right gapped spark plugs in i had it checked on a scanner and it said cylinder 5 was misfiring so they took the...


not only did the problem switch cylinders, it switched banks. cylinders 5&6 are on the drivers side and 4 is on the passenger side. i would recheck all wires to make sure you have the correctly installed.

cylinder locaton
2 8
dr. 8 7 6 5 7 4 coil

pass. 4 3 2 1 3 5
6 1 coil

Mar 18, 2010 | 1999 Ford Crown Victoria

1 Answer

I just bought a car it says 4 cylinder misfire i did spark plug and wires the shop where i bought it said he put a valve and injector and intake manifold gasket and head gasket in it took it 2 autozone on...


Some cars have a multiple coil system. One coil to two wires, etc. It could be the coil for that cylinder. Past that it could be the Ignition Control Module but if that is bad you would probably be getting what is called random engine misfiring and not just a problem with one cylinder. Could be an injector which the cleaner might help. Make sure you have good compression on the cylinder, that the plug hasn't fouled since being replaced, the plug wire is solidly seated, etc.

Mar 16, 2010 | 1999 Chevrolet Malibu

1 Answer

Cylinder 5 Misfire detected


it sonds like you have a coil braking down if your engine light was on and it told you cylinder #5 i would replace that coil and spark plug make sure when you pull the coil out that it does not have oil on it if it does then you have a valve cover gasket leaking oil into the plug galley and you will need to replace that first.

May 29, 2009 | 2002 Mercury Grand Marquis

1 Answer

Misfire on cylinder 4 & 5. combustion miss with cylinder cutout.


the best way to diagnose a misfire is to move the ignition coils of those cylinders(4 and 5) to different cylinders to see if the misfire will move. you can also move the injectors around and even the spark plugs.(make sure to keep a good record of where you are moving them). if you can't get the misfires to change cylinders. your next step would be to do a compression check on all cylinders. air leaks in the intake system can cause misfires but usually it isn't on the same cylinders all the time

Apr 24, 2009 | 2001 BMW 5 Series

2 Answers

2000 toyota tundra #5 cylinder misfire


i think #5 is on driver side the front one....

Dec 29, 2008 | 2000 Toyota Tundra

Not finding what you are looking for?
2000 Ford Econoline Logo

Related Topics:

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...