Question about 2004 Buick LeSabre
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Absolutely the light is not on because of that its on from something else/has something to do with the engine/Please rate my response thank you very much
Posted on Feb 03, 2009
Hi. the air filter is in a cylindrical looking device that is connected to the intake throttle body, via plastic flex hose. it runs horizontal. you will have to un clip the plastic housing and extract the filter. i will post a picture below.
Posted on May 22, 2009
Well you didn't say what engine is in it so,I'll wing it. Assuming it's a v6, the airbox is located in the front,probably driver side. Remove the 4 or 5 wing nuts or Phillips head screws. Gently but firmly lift the top housing & slide the old filter out. Put the new one in,making sure it's in the same way as the old one came out. It can't go in upside down anyway but I'm being specific. Re-install the housing & done!!
Posted on Jun 21, 2009
suspect 'mass air flow' sensor or possibly a rip in the air duct from the air filter to the throttle body. this sensor, if bad, can definitely cause stalling/rough running and is notoriously difficult to diagnose, as an intermittent failure often does not throw a code to trip the chk engine lite. the sensor is located immediately next to the air filter box and has a connector of approx 6-8 wires going into it. one quick and dirty way to elicit a problem (if there is one) is to gently rap on the metal housing of the sensor w/ the handle of a screwdriver or a small light hammer. it is advised to avoid hitting the flat plastic part on the sensor (where the wire connector is inserted) since there is sensitive silicon circuitry underneath and you could potentially break something that may not have been broken already.
Posted on Sep 29, 2009
Tips for a great answer:
Oct 09, 2016 | 2004 Buick LeSabre
on May 02, 2012 | 2005 Buick LeSabre
on May 01, 2012 | 2000 Buick LeSabre
Mar 24, 2014 | 2004 Buick LeSabre
Nov 13, 2010 | 2004 Buick LeSabre
Mar 18, 2010 | 2000 Buick LeSabre
Dec 08, 2009 | 1986 Buick LeSabre
200 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: