Question about 2006 Dodge Dakota

1 Answer

Location of the PCV valve on 2006 Dodge Dakota SLT 4X4 with 4.7L V8/VIN Engine code N? (It's not on the oil filler tube.)

Posted by on

  • fatguy45
    fatguy45 Sep 05, 2012

    I have a 2005 Dakota 4X4 4.7 V8 Mag could not get hose off PCV valve for 30 minutes so I cut the PCV valve in half with an all purpose key hole saw perpendicular to hose (be careful not to cut heater hoses or wires) pulled it all apart in 3 minutes flat .. replaced in under a minute...13 dollars Canadian for the part (OEM from MOPAR {designed to sit at the 45 degree angle so get the OEM part}) even if the old one is still ok it's still worth the investment to change it out anyway good or bad ....Beats oil foaming and sludge buildup that could wreck your engine:)

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 14 Answers

Should be around the valve cover

Posted on Nov 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the PVC valve location for a 2001 dodge Dakota SLT 3.9 v6 eng


The PCV valve is inserted into a grommet in the left side valve cover with a hose running to the intake manifold. On the right valve cover is another hose running to the ducting from the air box to the valve body - the PCV valve is not on this side.

Feb 11, 2017 | 2001 Dodge Dakota

1 Answer

I have a bmw 330i 2006 and i have oil coming out of the oil filler cap thats on top of the engine what could be the problem because the cap it self looks fine and tight


You may be having problems with the crankcase pressure regulating valve (PCV). If this is clogged or malfunctioning, pressure can build up inside the engine and blow oil out the filler tube.

Oct 12, 2015 | 2006 BMW 330i

1 Answer

I have a 1978 Cj5 Jeep with a 304 V8 in it, so I have two questions.One is, the pcv valve in the back of the intake where does the hose coming from the pcv valve go to? The second is the hose on the oil...


The PCV valve hose runs from the manifold to the filler cap. It is there to suck the combustion pressure out of the sump on throttle manuplitation

Jul 25, 2014 | Cars & Trucks

1 Answer

2000 dakota 4.7L. When first started after sitting sounds like no oil in top motor. Sounds like valves chattering. Only last for about a second. Then starts up fine as long as it doesn't sit for awhile....


I had the same vehicle. The 4.7 oil filler tube was a design defect. I don't think there was an official recall on it, but in later years, there was a change to the design. Dodge did say that it was not a problem though. As far as the valves chattering, I had the same thing. Just takes a while for the oil to flow back up. A good resource for all of this is www.dodgedakotas.com. Does require a small membership but the information is good.

Mar 06, 2011 | Dodge Dakota Cars & Trucks

1 Answer

Hi I was wondering if you could tell me where I would find the pcv valve in my 2002 dodge dakota 8cyl 4.7L


Its located on the left side of the oil filler where you add oil. Slide out the breather hose and then twist and pull the valve out.

Jan 19, 2011 | 2002 Dodge Dakota Club Cab

1 Answer

Where is the pvc valve located in the engine on a 2005 dodge dakota


The PCV valve, if it's the 4.7L then it's located at the oil fill tube, you have to turn it and pull it out to remove it. Look like THIS part replacement.

Good luck (remember rated this).

Jul 08, 2010 | 2005 Dodge Dakota

1 Answer

Hoping you can help......need the location for the Pcv valve for 2006 Dodge,Durango, 8 cylinder w/ a 4.7L?


On a 2000 Durango V8 the PCV is located on the side of the oil fill tube under the cap

May 06, 2010 | 2006 Dodge Durango

2 Answers

PCV valve location on a 2003 Dodge Ram pickup, 4.7?


It's on the side of the Oil filler container.

Mar 10, 2009 | 2004 Dodge Ram 1500

Not finding what you are looking for?
2006 Dodge Dakota Logo

Related Topics:

739 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

80668 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...