Question about 1986 Ford Bronco
Our rear window doesn't roll down. The repair manual says to roll it down manually from inside the gate panel on the inside, but we've tried that and there's no way to manually roll it down, hence we can't open the gate to fix anything. What's a person to do? Thanks for your help.
Unhook the wires from the motor in the tailgate and use a battery to hook wires directly to the motor to roll window down.you will have to try wires both ways as 1 way will go up the other down if this dose not work the motor is bad. if this works the problem is either the safety switch located on the bottom of the handle or drivers side latch, a bad wire or a bad dash switch
Posted on Nov 28, 2009
I had the same problem with mine and I drilled out the rivets holding the motor in. Have someone hold the window up when you do this so it don't fall. after you get it drilled and you can let it down you should be able to remove the window from the track through the panel. It has been a while since i had done it but the window motor was very reasonable.... make sure you are getting power to the motor before going through all of this because you might be able to put power to it and make it roll down.
Posted on Jun 27, 2008
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jan 22, 2015 | 1986 Ford Bronco
May 14, 2013 | Cars & Trucks
Oct 24, 2012 | 1986 Ford Bronco II
Aug 09, 2017 | 2002 Land Rover Freelander
May 12, 2011 | 1988 Chevrolet S-10
Jan 02, 2011 | 1996 Ford Bronco
Oct 15, 2010 | Land Rover Discovery Cars & Trucks
Oct 06, 2010 | 1999 Jeep Grand Cherokee
May 18, 2010 | 1988 Ford Bronco
May 10, 2010 | 1987 Ford Bronco
398 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: