If you fallow the hose comming out of air filter assembley it should lead you to the pcv valve the hose goes to the pcv and should come right off then you take the pcv valve out of the valve cover by just pulling it out and replace it with a new one
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
PCV VALVE LOCATED IN THE FRONT VALVE COVER.JUST PULL PCV VALVE OUT VALVE COVER. THEN YOU PULL PCV OUT OF THE END OF HOSE THEN INSTALL THE NEW ONE. FOR THE 3.8 ENGINE REMOVE THE TOP FUEL INJECTOR COVER.DISCONNECT THE ELECTRICAL CONNECTOR FROM MAP SENSOR AND UNCLIP THE MAP SENSOR FROM THE PCV VALVE ACCESS COVER AND ROTATE IT COUNTERCLOCKWISE TO REMOVE IT.TO REPLACE THE VALVE PULL THE PCV AND O RING ASSEMBLY FROM THE INTAKE MANIFOLD NOTING ITS INSTALLED POSITION AND DIRECTION. MAKE SURE WHEN YOU BUY NEW PCV VALVE TAKE OLD PCV VALVE WITH YOU SO YOU WILL GET THE RIGHT ONE.THAT WILL SAVE YOU TIME AND FUEL.
On your 1995 Chevrolet Truck Lumina Van 3.8L SFI OHV , the Fuel Filter is located:
Under vehicle, driver side, below seating area, front of fuel tank, mounted on chassis in fuel line
THanks for using FixYa - a FixYa rating is appreciated!!