Question about 2006 Toyota Corolla

1 Answer

How to rectify 2006 corolla rear wheel drive wheel alignment issues with non adjustable rear end (toe in & camber). Is there any aftermarket kits or other ways to solve these issues.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Toyota Master
  • 1,311 Answers

Since the rear wheels do no steering, there is no toe in or camber adjustments. Why do you believe you need these to be adjusted? Has the car been in an accident and the rear suspension is out?

Posted on Dec 03, 2010

  • Josh Ekstrom
    Josh Ekstrom Sep 17, 2016

    because my passenger side rear tire is toeing almost 1/4 inch in

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Toe out on turns


bout 548,000 results (1.11 seconds) Search Results

    Wheel Alignment A Short Course ' CarParts.com

    www.carparts.com/alignment.htm
    When you turn the steering wheel, the front wheels respond by turning on a pivot ... If they are pointed to the outside of the car then there is too much toe-out. ... Camberspecs are set so that when a vehicle is at highway speed, the camber is at the ....Eagle Parts · Ferrari Parts · Fiat Parts · Ford Parts · GEO Parts · GMC Parts.

    Toe out on turns - Fixya

    www.fixya.com > Forum > Cars & Trucks
    31 mins ago - Toe out on turns what is the specification for toe out on turns. 1998 ford escort. - Cars & Trucks question.

    Wheel Alignment: Camber, Caster & Toe - Auto Diagnosis ...

    www.aa1car.com/library/wheel_alignment.htm
    Most rear-wheel drive cars and trucks have alignment specifications that call ... Toe-out is when the front edges of the tires are farther apart than the rear ... One old mechanic's trick when replacing tie rod ends is to count the number of turns it ...Missing: escort

    Correcting Steering Pull - Auto Diagnosis Repair Help

Jan 12, 2016 | Cars & Trucks

2 Answers

Wheel alignment specs


This is just a free chat room

We have no info like that

We are at home & use the site-- the same as you do

Apr 08, 2014 | 2014 Ford Fusion

1 Answer

Front Wheel Allignment


On these LH body cars, camber is not adjustable. Neither is caster. Those angles are preset by the suspension geometry. However, specifications for them ARE published. Generally, if either of those two parameters are out of spec, then it's likely something is worn or damaged and needs to be replaced.

The only adjustable parameters are to the front and rear toe but specified as "Total Toe" - see note below.
The alignment specs are as follows ...

ALIGNMENT SPECIFICATIONS AT VEHICLE CURB HEIGHT
A. FRONT WHEELS
  1. CAMBER
    Acceptable -0.6° to +0.6°
    Preferred +0.0°
    Side to Side Differential
    Acceptable 0.7° or less
    Preferred 0.0°
  2. TOTAL TOE - Specified in degrees. See Note Below
    Acceptable 0.4° in -to- 0.0° out
    Preferred 0.2° in
  3. CASTER* (reference angle)
    Acceptable +2.0° -to- +4.0°
    Preferred +3.0°
    *Side to Side Caster Difference not to exceed
    Acceptable 1.0° or less
    Preferred 0.0°
B. REAR WHEELS
  1. CAMBER
    Acceptable -0.6° -to- +0.4°
    Preferred +0.1°
  2. TOTAL TOE** - Specified in degrees. See Note Below.
    Acceptable 0.2° out -to- 0.4° in
    Preferred -0.1° in
    **TOE OUT when backed onto alignment rack is TOE IN when driving.
  3. THRUST ANGLE
    Acceptable -0.15° -to- +0.15°
Note: "Total Toe" is the arithmetic sum of the left and right Toe settings. Positive is Toe-in. Negative is Toe-out. Total Toe must be equally split between left and right wheels. Left and Right Toe must be equal to within 0.02° (2 one hundredths of a degree).

Courtesy RJK & Concorde Shop Manual

Mar 08, 2014 | 1994 Chrysler Concorde

1 Answer

Wheel alignment


If the car is stock then I would run the caster at .05 higher on the right than the left to adjust for the crown of the road. the front alignment looks good other than I am not sure which one is camber and which one is caster. To adjust the rear camber on these cars you have to have a camber kit. From the angle I am seeing you don't have a camber kit. Also the only way to adjust caster on the civic is to shift the sub frame.

Jul 30, 2013 | 1997 Honda Civic

2 Answers

I want to know how to fix the alignment on my 1995 honda accord ex.


Before making wheel alignment adjustment, perform the following checks:
  1. Tires should be equal in size and runout must not be excessive. Tires and wheels should be in balance, and inflated to manufacturer's specifications.

  2. Wheel bearings must be properly adjusted. Steering linkage and suspension must not have excessive looseness. Check for wear in tie rod ends and ball joints.
  3. Steering gear box must not have excessive play. Check and adjust to manufacturer's specifications.
  4. Vehicle must be at curb height with full fuel load and spare tire in vehicle. No extra load should be on vehicle.
  5. Vehicle must be level with floor and with suspension settled. Jounce front and rear of vehicle several times and allow it to settle to normal curb height.
  6. If steering wheel is not centered with front wheels in straight-ahead position, correct by shortening one tie rod adjusting sleeve and lengthening opposite sleeve equal amounts.
  7. Ensure wheel lug nuts are tightened to torque specifications
Ride Height Adjustment

Before adjusting alignment, check riding height. Riding height must be checked with vehicle on level floor and tires properly inflated. Passenger and luggage compartments must be unloaded. Bounce vehicle several times, and allow suspension to settle. Visually inspect vehicle from front to rear and from side to side for signs of abnormal height.
Measure riding height. See figure. Riding height between left and right sides of vehicle should vary less than 1′ (25.4 mm). If riding height is not within specification, check suspension components and repair or replace them as necessary.
Wheel Alignment Procedures

Honda recommends using commercially available computerized 4-wheel alignment equipment. Follow equipment manufacturer instructions to obtain vehicle alignment settings. Use following procedures for necessary adjustments.
Civic Camber Adjustment
Compare camber settings with vehicle manufacturer recommendations. If camber is incorrect, check for bent or damaged front suspension components. Replace faulty components. Recheck camber.
Civic Caster Adjustment
DO NOT use more than 2 shims. If more than 2 shims are required to adjust caster angle, check for bent or damaged suspension components.
Compare caster settings with vehicle manufacturer recommendations. If caster is incorrect, check for bent or damaged front suspension components. Replace faulty components. Recheck caster.
Civic Toe-In Adjustment

  1. Secure steering wheel in straight-ahead position. Measure front wheel toe-in. If adjustment is needed, loosen tie rod lock nuts. Turn both tie rods equally in the same direction until front wheels are in straight-ahead position and toe-in reading is correct. Tighten tie rod lock nuts. Reposition tie rod boots if twisted.
  2. Ensure parking brake is released. Check rear wheel toe-in. If adjustment is needed, hold adjusting bolt on rear compensator arm and loosen lock nut. See figure. Adjust rear toe-in by sliding rear control arm until rear toe-in is correct. Install NEW lock nut, and tighten it while holding adjusting bolt.
Wheel Alignment Specifications

  • Camber - Measurement in degrees.
    • Front: 0 (range -1 to 1)
    • Rear: 0.33 (range -1.33 to 0.67)
  • Caster - Measurement in degrees.
    • 1.17 (range 0.17 to 2.17)
  • Toe-In - Measurement in inches (mm).
    • Front: -0 (0)
    • Rear: 0.08 (2.0)
  • Toe-In - Measurement in degrees.
    • Front: 0.00 (range - 0.16 to 0.16)
  • Toe-Out On Turns - Measurement in degrees.
    • Inner: 41.00
    • Outer: 33.50
Torque Specifications Ft. Lbs (N.m)

  • Rear Control Arm Adjusting Bolt: 48 (65)
  • Spindle Nut: 136 (185)
  • Tie Rod Lock Nut: 41 (55)
  • Wheel Lug Nuts: 80 (108)
hope this helps you out.

May 09, 2011 | 1995 Honda Accord

2 Answers

How do you know if you need a 4wheel or 2wheel alignment? 2000 Mercury Cougar.


Most FWD vehicles can have a four wheel alignment performed. A 2 wheel alignment is mainly for vehicles that are rear wheel drive. There are exceptions but the 2000 Mercury Cougar is a 4 wheel alignment.

Apr 19, 2011 | 2000 Mercury Cougar

2 Answers

Front tires seemed to be bent in a little causing uneven and fast ware on tires


Take it to your mechanic and ask them to check your tie rods and then an alignment.

Aug 05, 2010 | 1995 Nissan Pickup

1 Answer

How can I adjust the rear camber on a 2003 Audi TT?


There is likely an eccentric bolt on the lower contorl arm. The one on the arm closest to the bottom center of the wheel hub is the camber adjustment, the other eccentric is the toe adjustment. You really should have it aligned with a computerized alignment machine. Changing the rear camber changes the rear toe and vise versa. It would be nearly impossible to get both within an acceptable range without the proper equipment. You can crudely measure rear toe using a tape measure but you won't know what the thrust angle is and that could cause some serious alignment issues.

May 17, 2010 | 2002 Audi TT

1 Answer

Wheel alingment


That is right; the car has no built in adjustment for toe-in of the rear tires when the camber gets really bad. It has an adjustment for camber, and it can be used to adjust toe-in, but when your wheels start leaning badly, you can't do both.

Jul 31, 2008 | 2003 Ford Focus

2 Answers

Aggravated front tire wear (outer edges)


Your situation is not not abnormal. Since you can't rotate due to different sizes front & rear & they are high performance "Y" speed rated tires 30K is really pretty good

Jun 11, 2008 | 2006 Chrysler SRT

Not finding what you are looking for?
2006 Toyota Corolla Logo

468 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7772 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...