Question about 1993 Subaru Loyale

Open Question

Puesta a punto loyale 93 multipunto - 1993 Subaru Loyale

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do you remove a fender from a 93 subaru loyal

carefully by taking out all the blots

Jul 31, 2014 | 1993 Subaru Loyale

1 Answer

Will the axle off of my 91 subaru legacy work on my 93 subaru loyale

Even if it works ( it don't ) I would put a new half shaft on the 93 S-R.

Jan 23, 2013 | Subaru Loyale Cars & Trucks

1 Answer

Have a 93 suburu loyale cannot figure out where to add transmission fluid

Remove the spare tire under the hood.
Your dipstick for the transmission (if its a stick) will be under the tire.

Feb 28, 2012 | 1993 Subaru Loyale

1 Answer

Puesta a punto daewoo nubira 1.6 station

no puedo descargar la foto. I can not download the picture.

Aug 13, 2011 | 1999 Daewoo Lanos

1 Answer

I have a 93 Subie Loyale manual tranny. My belts started making a new noise last night. Want to tighten them, but I cannot see wher the bolt is to tighten due to lack of space to work, between the radiator...

hi power steering and alternator belt tensioner is located on top near alternator and aircon belt tentioner is located at the front of engine covers down by radiator fans, hard to see and tight to get into

Mar 20, 2011 | 1993 Subaru Loyale

2 Answers


2000 Dodge Intrepid 2.7L SFI DOHC 6cyl


Fig. After the timing chain is installed, the timing marks should be aligned-2.7L engine (click for zoom)

Espero que esto le ayude. Suerte, y recuerde calificar esta respuesta.

Nov 09, 2010 | 2000 Dodge Intrepid

2 Answers

Check engine light is on in my 1993 Subaru Loyale

i would suggest disconnecting the battery for 30mns then connecting this some times clears the code othr wise replace the sensor

Mar 25, 2009 | 1993 Subaru Loyale

1 Answer

Heat dial only works when "pushed" toward dash.

sounds like your brushes in the heater blower (remove molding panel BELOW glove box) 3 screws and a connector. If you have the original siemans motor still the brushes are at Ace Hardware use the EC type compound the are the OEM type
637 or 367 ?? which ever has SIDE wire NOT back wire. This motor brush assembly is separate so no problem putting back on THEN cover cap easy job 30 mins (on the loyale 93 you DON'T have to remove the glove box)

Feb 11, 2009 | 1992 Subaru Loyale

1 Answer

I need to change the relay in my 93 subaru!

which relay ? probably under the hood you will find a box with all the relays in it and if you turn the lid upside down you will see which one is which ..

Jan 25, 2009 | 1992 Subaru Loyale

Not finding what you are looking for?
1993 Subaru Loyale Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts


Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides