Question about 1998 Chevrolet C1500

1 Answer

How to disconnect fuel lines @ tank - 1998 Chevrolet C1500

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 56 Answers

You will need to get a tool in order to get it off there are little metal like finger inside

Posted on Nov 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change 2000 fuel pump on dodge grand


disconnect all fuel lines, vacuum lines, electrical connections at the fuel tank. disconnect the fuel filler tube, then support the fuel tank as it will be heavy, unbolt the fuel tank straps and lower the fuel tank. clean the top of the tank so no dirt falls into the tank. undo the tank unit lock ring and remove the tank unit(fuel pump assembly).

Sep 23, 2014 | 2000 Dodge Grand Caravan

1 Answer

What is the best way to change the fuel pump?


Hi, welcome to FixYa.com my name is Shawn and I will be answering your question.

  1. Relieve the fuel system pressure. Refer to the procedure in this section.
  1. Disconnect the battery ground cable (14301) .
  1. Drain the fuel from the fuel tank (9002) . Refer to the procedure in this section.

    Fuel Tank and Related Components
  1. Raise and support the vehicle.
  1. Remove the two pins from the fuel tank front protector.
  1. Remove the three fuel tank front protector bolts and remove the fuel tank front protector.
  1. Disconnect the evaporative emission hose (9E325) from the evaporative emission valve (9B593) .
  1. NOTE: Label the fuel return line and fuel supply line to ease installation.
    Loosen the fuel return hose clamp and slide it away from the fuel return hose connection.
  1. NOTE: Use a rag to prevent fuel from spilling while disconnecting the fuel lines.
    Disconnect the fuel return hose at the fuel tank .
  1. Loosen the fuel supply hose clamp and slide it away from the fuel supply hose connection.
  1. Disconnect the fuel supply hose at the fuel tank .
  1. Disconnect the fuel pump and bracket electrical connector.
  1. Loosen the hose clamp from the fuel tank to filler pipe hose (9047) and slide the hose clamp toward the fuel tank .
  1. Separate the fuel tank to filler pipe hose from the fuel tank filler pipe (9034) .
  1. Place a jack under the fuel tank to support it when the fuel tank support straps are removed.
  1. Remove the two fuel tank support strap bolts and allow the fuel tank support straps to hang down.
  1. Remove the spring clips from the fuel tank support strap hinges.
  1. Remove the fuel tank support strap hinges and remove the fuel tank support straps.
  1. NOTE: An assistant may be necessary to remove the fuel tank .
    Lower the fuel tank from the vehicle.


I hope my assistance helped you and resolved your concern, if you need further assistance please ask.

Aug 08, 2011 | 1995 Mercury Villager

2 Answers

Removal of gas tank


Fuel Tank Assembly Removal & Installation Single Tank To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section
  2. Relieve fuel system pressure (See: Fuel System Relieving)
  3. Disconnect the negative battery cable
  4. Raise and support the vehicle
  5. Drain the fuel tank in an approved container
  6. Remove or disconnect the following:
    • evaporative emission (EVAP) canister Disconnect fuel lines for single tank gm_trk_sub15_fuel_line_rem_singl_tnk.gif

    • Chassis fuel lines (B) at the fuel tank (A)
      1. Cap the fuel and EVAP lines to prevent possible fuel system contamination
      Disconnect EVAP vent line gm_trk_sub15_evap_vent_line_rem.gif

    • EVAP vent line at the fuel tank clip (E) Disconnect vent hose and filler hose gm_trk_sub15_vent_filler_hoses.gif

    • Vent hose and filler hose clamp (D, B)
    • Vent hose and filler hose from the line
    Fuel tank removal gm_trk_sub15_fuel_tank_rem.gif

  7. With the aid of an assistant or a suitable jack support the fuel tank
  8. Remove or disconnect the following:
    • Fuel tank strap attaching bolts
    • Fuel tank straps
  9. Carefully lower the rear of the fuel tank slightly
  10. Remove or disconnect the following:
    • Fuel sender cover Fuel tank connections gm_trk_sub15_fuel_tank_conn.gif

    • Fuel sender and the fuel pressure sensor electrical connectors
    • Fuel tank
  11. Place the fuel tank in a suitable work area Fuel lines at the tank gm_trk_sub15_fuel_lines_at_tank.gif

  12. Remove or disconnect the following:
    • Fuel feed and return lines (C) from the fuel sender and the retaining clips
    • Fuel pump assembly from the fuel tank
    • EVAP line from the fuel tank roll over valves (B, D) and the retaining clips (A)
    • Fuel fill hose and the vent hose from the fuel tank
    • Fuel tank
To Install:
  1. Install or connect the following:
    • EVAP line to the fuel tank roll over valves and the retaining clips
    • Fuel pump assembly to the fuel tank
    • Fuel feed and return lines to the fuel sender and the retaining clips
    • Fuel fill hose and the vent hose to the fuel tank; torque hose clamps,
      1. Torque to: 22 lb-in. (2.5 Nm)
  2. With the aid of an assistant or a suitable jack support and partially raise the fuel tank front end first
  3. Install or connect the following:
    • Fuel sender and the fuel pressure sensor electrical connectors
    • Fuel sender cover
  4. Fully raise the fuel tank
  5. Install or connect the following:
    • Fuel tank straps
    • Install the fuel tank strap attaching bolts;
      1. Torque to 30 lb-ft. (40 Nm)
    • Fuel fill hose and the vent hose to the lines;
      1. Torque hose clamp to 22 lb-in. (2.5 Nm)
  6. Torque the vent hose clamp,
    • Torque to: 22 lb-in. (2.5 Nm)
  7. Connect the EVAP vent line to the fuel tank clip
  8. Remove the caps from the fuel and EVAP lines
  9. Install or connect the following:
    • chassis fuel lines at the fuel tank
    • EVAP canister
  10. Lower the vehicle to the ground
  11. Fill the fuel tank with clean fuel
  12. Install the fuel filler cap
  13. Connect the negative battery cable
  14. Use the following procedure to inspect for leaks:
    • Turn the ignition on for two seconds
    • Turn the ignition off for 10 seconds
    • Turn the ignition on
    • Inspect for fuel leaks
  15. Install the engine sight shield
  16. Road test the vehicle to check performance

Feb 12, 2011 | 2000 GMC Sierra

1 Answer

Need to know how to disconnect the fuel lines from the fuel pump to replace the fuel pump


  • Park your Chevy Tahoe in a safe place with a level surface and plenty of room for you to work around the vehicle. Open the hood and disconnect the black, negative battery cable.
  • Relieve the fuel system pressure. Loosen the fuel filler cap and depress the small stem inside the fuel pressure Schrader valve. The valve is similar to an air valve on a bicycle tire and is located on the fuel inline rail in the engine compartment right before the first fuel injector. Use a small screwdriver to depress the stem while covering the valve with a shop rag to catch the squirt of fuel.

  • Drain the fuel tank through the fuel filler hose using a hand siphon pump if necessary.
  • Raise the rear of the vehicle using a floor jack and safely support it on two jack stands.
  • Remove the evaporative emission (EVAP) canister located next to the fuel tank. Use a wrench or ratchet and socket.
  • Disconnect the chassis fuel lines leading to the fuel tank by pressing the lock tabs and pulling the lines off their fittings. Plug the fuel lines with clean shop rags to prevent fuel system contamination.
  • Disengage the EVAP line from the clip at the side of the tank, opposite the frame rail. Support the fuel tank with jacks if necessary and remove the two fuel tank straps using a ratchet and socket; then lower the rear of the fuel tank slightly. If necessary, disconnect the fuel filler hose from the tank by removing the hose clamp at the tank.
  • Disconnect the fuel pump electrical connectors, lower the tank and disconnect the fuel lines from the fuel/sending assembly on the tank.
  • Clean the area around the pump/sending unit assembly. Disconnect the pump/sending unit by unlocking the cam lock. With a long punch and a light hammer, turn the cam lock counterclockwise. After releasing the cam lock, lift the pump/sending unit assembly off the tank and replace the old pump with the new unit.

  • Dec 04, 2010 | 1999 Chevrolet Tahoe

    2 Answers

    How do u get the fuel pump on


    Removal & Installation To Remove:
    1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
    2. Shift the vehicle into NEUTRAL and position it on a hoist.
    3. Release the fuel pressure.
    4. Disconnect the negative battery cable.
    5. Remove the fuel tank filler cap.
    6. Drain as much fuel from the tank as possible.
    7. Using suitable hose pinching pliers, clamp the fuel tank filler hose. Clamp the fuel tank filler hose in the location shown ford-05-00-396.gif

    8. Disconnect the three quick connect couplings from the fuel tank tubes at the tank.
    9. Disconnect the fuel pump electrical connector.
    10. Disconnect the fuel filter inlet tube from the filter.
    11. Position a suitable lifting device under the fuel tank.
    12. Remove the two fuel tank support strap bolts.
    13. Lower the fuel tank to access the fuel pump module while swinging the fuel tank support straps away from the tank.
    14. Clean the area around the fuel pump mounting flange.
    15. Disconnect the fuel pump module electrical connector and the fuel pump module fuel outlet tube.
    16. Using the special tool, turn the fuel pump module retaining ring counterclockwise and remove it. CAUTION
      The fuel pump module must be handled carefully to avoid damage to the float arm, filter and convolute hoses.
    17. Turn the fuel pump module counterclockwise and the fuel pump module will release from the locking tabs. Remove the fuel pump module from the fuel tank.
    To Install:
    1. Install the fuel pump module in the fuel tank.
    2. Connect the fuel pump module electrical connector and the fuel pump module fuel outlet tube.
    3. Raise the tank into position and install the mounting strap bolts. Tighten the bolts to 26 ft-lbs (35 Nm).
    4. Connect the fuel lines and electrical connectors at the fuel tank.
    5. Lower the vehicle and refill the tank.
    6. Connect the negative battery cable.
    7. Turn the ignition key to the ON position to pressurize the fuel system.
    8. Visually inspect the fuel system for leaks.
    prev.gif next.gif

    Aug 19, 2010 | 2001 Ford Taurus

    1 Answer

    Can you give me instructions on how to change a 1987 sedan deville fuel pump?


    In-Tank Fuel Pumps
    1. Disconnect the negative battery terminal, open the fuel tank filler door and disconnect the sending unit feed wire. Release the fuel pressure.
    2. Siphon the fuel from the fuel tank. If the rear of the car is raised one foot higher than the front, more fuel can be taken out.
    3. Raise the rear of the car and remove the screw securing the ground wire to the cross member.
    4. Disconnect the fuel line, evaporative emission lines and the fuel return lines at the front of the tank.
    5. Support the tank with a jack and wooden block and remove one screw on each side securing the fuel tank support straps to the body at the front of the tank.
    6. Lower the jack and tank enough so that the fuel pump electrical lead can be disconnected. Disconnect the wire.
    7. Remove the fuel tank from the car.
    8. Remove the locknuts securing the fuel gauge tank unit and fuel pump feed wires to the tank unit.
    9. Turn the cam locking ring counterclockwise with a soft non-ferrous punch and hammer. When the lock ring is disengaged, remove it and lift the gauge/pump unit from the tank.
    10. Install in the reverse order of removal. Tighten the fuel tank retaining strap screws to 25 ft. lbs. (34 Nm).


    7d1d06b.gif
    In-tank fuel pump

    May 05, 2010 | 1987 Cadillac DeVille

    1 Answer

    Can i get to fuel pump on 1999 Acura TL from back


    Below are the proper steps to removing your vehicle's fuel tank..



    Disconnect the negative battery cable.
    Relieve the fuel pressure
    Remove the rear seat cushion.
    Remove the plastic grommet from the floor pan.
    Detach the fuel pump electrical harness.
    Disconnect the fuel lines from the fuel pump by compressing the tabs on both sides of each nylon push connect fitting and easing the fuel line off of the fuel pump.
    Raise and safely support the vehicle securely on jackstands.
    Remove the muffler mount.
    Remove the heat shields.
    Remove the fuel tank cover.
    Remove the drain plug and drain the gasoline into a approved container.
    Disconnect the fuel lines and remove the fuel filter and base.
    Loosen the fuel tank filler pipe clamp at the fuel tank.
    Support the fuel tank using a hydraulic jack and a block of wood or other suitable device.
    Remove the two fuel tank support strap bolts and position the straps out of the way.
    Partially lower the fuel tank to access the fuel tank filler pipe vent tube and disconnect the vent tube and filler pipe from the tank.
    Disconnect the fuel vapor tube from the tank.
    Lower the tank from the vehicle.
    Installation is the reverse of the removal procedure.



    0853314.jpg

    Apr 23, 2010 | 1999 Acura TL

    1 Answer

    How do you replace the gas tank on a 99 Ford Econoline Van?


    this is for gas tank behind axle, not in front of axle.

    SECTION 310-01A: Fuel Tank and Lines—Gasoline and Diesel 1999 Econoline Workshop Manual
    REMOVAL AND INSTALLATION Fuel Tank — Aft-of-Axle
    Special Tool(s) sxm~us~en~file=st1399a.gif~gen~ref.gif Fuel Line Disconnect Tool
    310-5039 (T90T-9550-5) sxm~us~en~file=st1130a.gif~gen~ref.gif High-Lift Transmission Jack
    014-00942 or equivalent
    Removal
    sxm~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related component. Highly flammable mixtures are always present and may be ignited, resulting in possible personal injury.
    sxm~us~en~file=ani_caut.gif~gen~ref.gif WARNING: Fuel in the fuel system remains under high pressure even when the engine is not running. Before repairing or disconnecting any of the fuel lines or fuel system components, the fuel system pressure must be relieved to prevent accidental spraying of fuel, causing personal injury or a fire hazard.
    NOTE: The 55 gallon aft-of-axle fuel tank (9002) is shown; the 35 gallon aft-of-axle fuel tank is similar.
    1. Disconnect the battery ground cable.
    1. Relieve the fuel pressure; refer to Section 310-00A .
    1. Drain the fuel from the fuel tank; refer to Section 310-00A .
    1. Raise and support the vehicle; refer to Section 100-02 .
    1. NOTE: In this illustration, the vehicle body is shown removed for clarity.
      Disconnect the fuel tank filler pipe (9034) and the filler vent tube from the fuel tank.
    1. Position the jack under the fuel tank.
    1. Remove the 3 bolts.
    1. Remove the 3 nuts.
    1. Remove the fuel tank support straps (9092).
    1. Partially lower the fuel tank.
    1. Disconnect the fuel lines from the fuel pump (9350); refer to Section 310-00A .
    1. Disconnect the fuel pump and fuel tank sending unit electrical connector.
    1. On gasoline fuel tanks, disconnect the hose(s) from the evaporative emission valve (9B593).
    1. On gasoline fuel tanks only, disconnect the fuel tank pressure sensor electrical connector.
    1. Lower the fuel tank.
    1. If the fuel tank is being replaced, transfer the fuel pump, fuel tank sending unit, the evaporative emission valves and the fuel tank pressure sensor (gasoline fuel tanks) or the plug (diesel fuel tanks) to the new fuel tank.

    Jun 17, 2009 | Ford Econoline Cars & Trucks

    2 Answers

    Trying too find where the fuel pump is in my 92isuzu pick up truck its a 4cylinder


    its in your fuel tank. make sure the tank is empty before you drop it.

    Jan 18, 2009 | 1992 Isuzu Pickup

    Not finding what you are looking for?
    1998 Chevrolet C1500 Logo

    Related Topics:

    30 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    75744 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8123 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...