- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Audio and WV have a rear fog lights that are usually behind a clear lens to either side of the license plate. They are activated by pulling on the headlight switch two notches. Pulling one notch turns on the front fog lights.
fast blinking is a sign that the flasher relay has a fault , change that and i would expect the fog light issue will resolve as well , as i expect the flasher relay is trying to earth through a different circuit
I found the easiest way to change the fog light bulb is to take bumper off, takes 5 mins, 5/6 screws/clips across the top were the bonnet meets the bumper and a few clips on wheel arches then pull off and 2 spot lights very easy to Accra.
The fog lights on most vehicles sit directly underneath the headlight bulbs. The ballast and wiring work just like the headlights, so changing them takes not much time. The procedure to change the fog light is as follows:--1) Open the hood and reach down underneath the headlights to unplug the electrical plug from the fog light assembly. Squeeze the top of the release tab and pull the connection off the bulb's ballast.2)Turn the fog light counterclockwise to remove it from the fog light housing.3)Install the new fog light bulb.Then connect electrical plugs properly.4) Test the fog lights by turning it ON.Thanks. you can rate this solution and show your appreciation.
if you look directly under the bumper just under the fog light you will see a bracket that holds a 13 mm bolt. undo that and pop the light out from the front of the bumper and replace the bulb. install is the reverse