Question about Chevrolet Equinox

1 Answer

I put the back wiper on earlier in the week to clean off the frost. It swiped across the window once and has since quit working. I have the switch off but we can hear a noise in the rear door and also the battery is drained. Any answers for my problem. 2007 Chevrolet Equinox

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 132 Answers

Sounds like your rear wiper switch has shorted. If you can pull it out of the dash or get the panel off and get behind the switch you can disconnect it and see if that stops it. If it does you can get a new one later and replace it.

Posted on Nov 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Erratic windscreen wiper action


sounds like the wiper control itself is playing up

Feb 27, 2014 | 2001 Nissan Micra

2 Answers

Wipers work intermitently


Contact's in wiper switch worn or corroded! Replacement needed is it a ford? Or Toyota? :)

Jan 24, 2013 | 1997 Ford Taurus

1 Answer

2000 v5 windscreen wipers dont work more than once across screen then stop upright


ita a common fault, some peole take the motor out of the car and strip it down, clean it and lube it back up and then put back in car, then some people say while its out just replace it, if your handy with the spanners then clean it and put back if not just replace it

Sep 04, 2011 | 2000 Volkswagen Golf

1 Answer

My wiper motor started working intermittently. Then it quit all together. I had a new switch put in and it still did not work. I then had a wiper motor put in and it worked for 2 weeks. It quit working...


It's probably a bad ground, clean the plug or drill a screw into the frame and connect it with a wire and another screw into the actual wiper box where it won't interfere with the motor.

Apr 25, 2010 | 1993 Mazda Protege

1 Answer

Wipers don't work


sounds like wiper control stalks, i am in the uk and it is quite a common fault on the focus

Dec 12, 2009 | 2005 Ford Focus

2 Answers

1990 Ford Taurus GL windshield wipers park in the wrong position


I have a 1996 Ford Taurus with a similar malfunction the intermittent wiper function is erratic, but the wipers park properly. I'm the original owner & this malfunction was in the car from the factory. I have a regular Ford Dealership manual & came to the conclusion that the Generic Electronic Module located behind the fuse panel is bad (computer glitch in programming) ! Ford Dealers want over $ 300.00 for a brand new module, I haven't checked with my local used auto parts recycler yet, but I know it will be less than the dealer price !

Mar 16, 2009 | 1990 Ford Taurus

3 Answers

Windshield wipers don't work


The Generic electronic Module controls the windshield wipers, this system controls all the electrical items like windows door ajar warning and so on. You need to have the GEM quick tested to determine the area to look for the fault, it is very rare for the GEM to fail, the most ccommon cause is the W/S wiper switch, and next the motor's internal contacts that switch it on, or the motor itself, get the Generic Electronic Module (GEM) tested with a scanner and then get back to me with the fault codes, if I was to guess a part it would be the wiper switch it is fairly expensive so it's better to test first then replace parts after pin-point tests of components and wiring are complete and you can be sure with little room for error what is causing the problem.

Aug 03, 2008 | 1998 Ford Explorer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8152 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...