Question about 2000 Chevrolet S-10

1 Answer

2000 s10 trailer wiring instructions. I need to know how to hook my trailer wiring to my 2000 s10 xtreme.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 174 Answers

Try this site. http://www.etrailer.com/faq-wiring.aspx. They give color codes and detailed info. If you have one bulb that does both, running and stop lights, then simple wiring to colors should correct the proble. If you have two bulbs, one for brake and one for turn signal, you must use a converter. Otherwise, it feeds back to whatever you are wired to.

Posted on Dec 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need to know how to wire in trailer brakes with a battery on the trailer on a 92 jeep Cherokee Laredo


This is the OEM / Factory set up for trailers from my 1990 FSM. Note that they used a flat-5 connector instead of the typical flat-4 plug that 99% of the known universe uses. I don't know if newer XJ's came with the flat-4... The 7-conductor schematic is typical although you'll find that some agricultural / horse trailers are wired differently (click image for zoom)...

zjlimited_1283.jpg
Here's a scan of the "instruction sheet" that came with my utility trailer's flat-4 wiring kit. (Retouched for clarity.)

zjlimited_1284.jpg


Hope this helps.

May 25, 2011 | Jeep Cherokee Cars & Trucks

1 Answer

I installed a trailer brake controler on my 2000 Chevrolet Silverado. The truck has the factory Tow/haul package.There is a blue wire which I think is the wire for the trailer brakes in the underhood...


If I understand you correctly you have found the blue wire in the chassis wiring but don't know where to hook it up. It doesn't hook up to the truck, you connect it to the blue wire coming from your brake controller. You will have to drill a hole or poke a hole in an existing grommet in the firewall to get the wire through. There should be another wire usually orange or red along with the blue wire in the truck wiring that you hook up to the load center under the hood on one of the unused studs. It is for the charge circuit on your trailers if so equipped. You will probably need to install a fuse for the stud. It should be clearly marked on the load center lid.

Apr 21, 2011 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

I need trailer lights on my sonoma how do I hook them up


when u buy a trailer plug for your truck it will come with instructions...4 wiring..thanx for using fix ya.

Apr 02, 2011 | 2000 GMC Sonoma Extended Cab

1 Answer

When I hook up to a trailer, the left turn signal and the left brake light won't work. I have tried several trailers with the same results. I own a 2003 gmc 3/4 ton pickup. I have two places to connect the...


it sounds like either the wires controling the left brake light and turn signal are borken or loose on your truck. or there could be a problem with the ground for the trailer hookup. you should take a volt meter and then have someone put the brake on and test at the hook on the truck side to see if you are getting any voltage there and do the same thing with the turn signal. if you do not have any voltage there you need to trace the wires back up into the truck to find where you do have voltage . you may find a broken wire as you go. How many wires are there in your trailer hook up?

Sep 22, 2009 | 2000 GMC Sierra

1 Answer

Have 2000 Explorer when I hook up trailer lights the right blinker does not work, looks like the brake light is always on for the right side.


This sounds like a short in the wiring on the trailer. You could attempt to isolate the source of the short, or put new wiring in for the trailer.

Sep 06, 2009 | 2000 Ford Explorer

2 Answers

Can't find trailer wire hook up on escalade


check around in the rear cargo area in the corners by your rear taillights, i had a grand cherokee that had the lights in a compartment back there.

May 29, 2009 | 2000 Cadillac Escalade

1 Answer

Need wiring color code for a 2000 saturn SL2 for hooking up a trailer light four pin connector


The trailer wires are left turn, right turn, running lights(the smaller elements on both tail-lights and any side lights) and ground. Energise the corresponding lights and connect the wires accordingly. Find a good ground. A piercing test probe will find the correct wire for you if you can't track it to the bulb.

May 06, 2009 | Saturn SL2 Cars & Trucks

2 Answers

2003 Chevy S10 Pickup fast flashing signal lights


Recheck your wire harness to your trailer hook up. You may have a short in the wire. Good luck 

Apr 06, 2009 | 2003 Chevrolet S-10

Not finding what you are looking for?
2000 Chevrolet S-10 Logo

457 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75807 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8172 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...