Question about 2001 Toyota 4Runner

Open Question

What is mean NIN Sensor ? Code P1820 - 2001 Toyota 4Runner

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My Premio car with engine 1Az shows thise code p1820 how do I diagonise thise


P means Power Train. 1 means it is a specific item. 8 means ignition, possibly a misfire, 2 means /C clutch voltage issue and 0 means Transmission engaged at a high throttle angle.

Feb 02, 2017 | Cars & Trucks

1 Answer

What does code 13 mean for a 2000 mercury cougar


If you mean P0113 then it is an intake air temperature circuit high output. Which means some of the possible problems could be a dirty air filter, defective intake air temp. sensor, defective MAF sensor, or faulty or corroded air intake temp sensor.
Now if it code
P0133 then the cause would be an O2 sensor. Which is bank 1 sensor 1.
In some cases on older vehicles code 13 means there are no problems but that was back in 95 and before.

Dec 27, 2015 | Mercury Cars & Trucks

1 Answer

I changed the sensor and the harness and still has the code any thoughts


when a sensor code is set off this does not mean the sensor is bad. you did not list what sensor it is, what vehicle it is, and what the code is reading. if it is a o2 sensors code for instance. sure this could mean a bad o2 sensor or it could mean the o2 sensor is reading that the exhaust has too much oxygen in the exhaust thus the engine is running lean witch means you are not getting enough fuel or touch air. could also mean you have an exhaust leak or bad catalytic converters. need more info.

Jul 17, 2015 | Cars & Trucks

1 Answer

LOCATION OF P1820 NIN SENSOR CIRCUIT


Problem with 2001 Toyota 4Runner? right? USA CAR?????
what engine, what displacement, how many cylinders?
gasoline or diesel???????????

p1820 (P1 is a toyota only factory code so don't read about fords etc)

the FSM covers all that ,as does alldata.com
how it works is complex, as are the monitors.

did you pull that code with your tools or Autozoned."?
what tool?

my listing ends at 1780. (a bad source, i guess)
2 car pros same answer.
i cant find it , but do answer all questions in bold please.

Jan 04, 2014 | 2001 Toyota 4Runner

1 Answer

What does code PO123 means?


code p0123 refers to Throttle position sensor. accelerator pedal position sensor output high cause ---wiring short---TP/APPsensor and ECM
code p0121 refers to the TP sensor APP switchA range /rformance problem
code p0135refers to heated oxygen sensor (HO2S) 1 bank 1 heater control - circuit malfunction causes may be fuse---wiring---HO
S sensor and ECM Out of all these the commom fault is the position sensor and the oxygen sensor.

Mar 10, 2013 | Cars & Trucks

2 Answers

WHAT DOSE THE CODE P0335 AND P0315 MEAN


CODE PO335 CRANKSHAFT POSITION SENSOR CIRCUIT. CODE PO315 - NO CRANKSHAFT POSITION SENSOR LEARNED. POSSIBLE CAUSES, CRANKSHAFT TONE WHEEL FLEX PLATE IS DAMAGED, TONE WHEEL PULSE RING MAY BE DAMAGED, ERRATIC CKP SENSOR SIGNALS WIRING CONNECTOR PROBLEM, CKP SENSOR HAS FAILED, PCM HAS FAILED.

Jul 01, 2011 | 2009 Chrysler Sebring

1 Answer

P1820 ????


Mode switch voltage low. Very unusual to see on a gm. I would suggest replacing the mode switch, if you can give me year and model i will walk you through it.

Jan 17, 2011 | Chevrolet Suburban 1500 Cars & Trucks

1 Answer

The check engine came on on my 2006 ford escape. It was the map sensor code So I changed the sensor and the light came back on. What could


A map sensor code doesnt mean the sensor is bad. it means the computer didnt like the info coming from the sensor. so what is the code now?

Dec 16, 2010 | 2006 Ford Escape

1 Answer

Check engin light on. There are four error codes P0137,P0141,P0342, and P1792. How do I fix it. Will I pass inspection with these codes?


P0137 Error code Faulty O2 sensor Exhaust leak near the rear sensor
  • Plugged catalyst
  • Short to voltage on O2 signal circuit
  • High resistance or open on O2 signal circuit
Possible Solutions
  • Replace faulty sensor
  • Repair exhaust leak near the rear sensor
  • Check for restriction in catalyst and replace as necessary
  • Repair short, open, or high resistance on o2 signal circuit
P0141 Error code means Downstr Heated Oxygen Sensor Heater circuit fault - Bank No. 1.

- replacement is needed for this issue.

P0342 Error code means Camshaft Position Sensor Circuit Low Input

P1792 Error code means P1792 means the computer isnt properly programmed so if this code keeps comming back the pcm may need to be replaced


Aug 13, 2010 | 2002 Daewoo Lanos

1 Answer

Code po141 heater circut sensor/where do i find this sensor? where is bank 1


code is not for heater circuit,
code p0141=O2 Sensor Heater Circuit Bank 1 Sensor 2
that means its an oxygen sensor located in bank 1 which is the drivers side,sensor 2 means its the downstream sensor after the convertor

Nov 15, 2009 | 1998 Pontiac Grand Am

Not finding what you are looking for?
2001 Toyota 4Runner Logo

Related Topics:

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8589 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...