Question about 1995 Chevrolet Blazer

1 Answer

How do I replace the head gasket in my 95 blazer?

Posted by on

  • Anonymous Nov 06, 2010

    Other than removing the cylinder head,what is the question?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 132 Answers

That is a very big job for a do it yourselfer. First you have to disconnect the battery then take out the air cleaner. Unplug all the sensors and move the wiring out off the way take the intake and throttle body off and the valve covers and then sometime after an hour or so you can get to the head bolts. I would not recommend doing this yourself if you haven't rebuilt an engine before. Also if your replacing your gasket you might as well have the head checked out at a machine shop because theres a good chance it could be damaged from excess heat. Best thing to do would be to pull the engine and rebuild it I'm sure it has tons of miles on it.

Posted on Nov 07, 2010


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1114 Answers

SOURCE: head gasket replacment

The gaskets only line up one way with the engine block holes on most of the cars Ive worked on.Whichever way it lines up,if the lines are facing up or down theres the answer.Just make sure all of the water passages line up with the holes on the gaskets.

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 2003 Chevy blazer with a 4.3 vortec motor it has a small leaking head gasket how long can I drive it until I have the money to fix it.

Troubleshooting a Blown Head Gasket (GM 4.3L, 5.0L, 5.7L) > GM > 4.3L, 5.0L, 5.7L
Mar 28, 2011 - There are so many ways to test for a blown head gasket on your 4.3L, 5.0L, 5.7L GM van (or mini-van, pick up, SUV) that it can get confusing.

Chevy Blazer Coolant Leak (Intake Manifold) - YouTube

? 4:33
Oct 9, 2013 - Uploaded by eyetotheworld
I have localized a coolant leak on my 2003 Chevy Blazer to thegasket of the intake ... Turns out that this is common among this particular engine both in the v6 & v8 sizes. ... The guy has been generous to detail his projects. ... 98 S10 Vortec V6 4.3 IntakeGasket Replacement Part 1 of 5 - Duration: 18:17. by ...

Chevy 4.3l v6 oil leak issue 2001 Xtreme Blazer - YouTube

? 6:11
Nov 12, 2011 - Uploaded by smiatacz
This darn little engine just keeps going. ... I have a 2003 chevy blazer and the oil cooler line from the oil filter to ... I have a 95 Chevy s10 v6 vortec 2wd that is slightly dripping oil out of agasket ... I'm having same problem 2001 Chevy Blazer 4x4 (not xtreme) not sure if those same bolts are missing on mine.

Dec 28, 2015 | Cars & Trucks

1 Answer

95 Blazer,and 2000 blazer do they come with the same engine and trans, and will they match up the same wire wise

No. The cylinder heads and intake are different. If you have a 95 and are using a 2000 as a replacement, you will have to change the intake assembly along with the cylinder heads. The transmission from the 95 will have to be modified at the bell housing cover. The oil pan will be different but will still work from the 2000. You will need gaskets for the 95 year if you swap over the heads and intake. Once the heads and intake are swapped, the wiring will be the same

May 15, 2015 | Cars & Trucks

1 Answer

What does code 32 mean on a 95 chevy blazer?

Code 32 for a 95 Blazer with fuel injection means there is a problem in the EGR circuit. Most likely this is caused by carbon particles preventing the EGR valve to close. When servicing the EGR, use one of the new gaskets available with a screen installed. It will help prevent future clogs.

May 03, 2014 | 1995 Chevrolet Blazer

2 Answers

I have a 95 blazer thats leakin tan like oil can u tell me whats that problem its leakin on drive side

Hi :) Tan colour oil is water and oil mixed together or greenish tan is antifreeze and oil That sounds like a head gasket leak coming from the left bank of the motor.Check the dip stick it might be showing up in the oil too.Head gaskets are around $60.00 plus labour as long as the head is not warped or cracked.

May 02, 2011 | 1995 Chevrolet Blazer

1 Answer

2000 blazer 4.3 what would cause coolant to be in engine oil

A blown head gasket. This is common if you ever let the engine overheat. Aluminum heads will warp if allowed to overheat even for a few minutes. If you check the coolant there may also be oil in the coolant. Remove your spark plugs and see if they are all the same color on the tip of the plugs that are inside the engine. Usually one or two of the plugs will foul with oil or coolant and not fire like the other plugs. You could also have a cracked head or engine block. It is a complex job for the home mechanic to remove and replace the head gaskets. If you do, take the heads to a shop that will test for cracks and rebuild the head before you replace the head gaskets and intake and exhaust gaskets. This is a complex job for the average home mechanic.

Sep 21, 2010 | 2000 Chevrolet Blazer

2 Answers

My 95 mustang had over heated, has blowing head gaskets and it won't start what do i need to do to fix it?

V6? these are famous for head gaskets and cracked heads. the heads will need to come off and checked over for cracks and repair or replacement by a automotive machine shop.

Oct 22, 2009 | 1995 Ford Mustang

1 Answer

95 s-10 blazer idles rough


Jun 25, 2009 | 1995 Chevrolet Blazer

1 Answer

95 S10 blazer won't start

check the EGR valve. it might be dirty in side with carbon. DONT GRINE OFF GASKET SCRAP IT OFF.

Apr 12, 2009 | 1994 Chevrolet S-10 Blazer

2 Answers

1988 chevrolet s10 blazer 2.8l 4 wheel drive

Well you can buy a new & cheaper car or either you can try to replace the head gasket.

Jun 17, 2008 | 1988 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides