Question about 2000 Chrysler Concorde

1 Answer

I have a 2000 Chrysler concord 2.7 v6 auto. I went and did a computer dianostic done. The code on the computer said the gear 4 incorrect ratio. What does this mean. Where is it located. I was driving down the street and my car was hesitating like it didn't want to move. I pulled over to see what the problem was. There weren't any tranny fluid in the car. I put some in. And try to drive off. The car moved for a while then stop any start spinning. Then kick into gear. Then stop start spinning then kick back into gear. What could this be

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 417 Answers

Hi,
its down on tranny fluid still and probably was just about completely out. check the transmission fluid with the car idling in park, set park brake, check fluid. if it doesent show or barely, add ONE quart of fluid. restart and check where the level is. and 1/2 cups at a time now. keep doing this untill the fluid is at the top mark, be careful and dont overfill it. This could be signs of a new problem or a leak. park it on a piece of cardboard overnight and look at the cardboard in the morning. study where its leaking, tighten the hose or it may need a new gasket. buy a haynes or chilton manual for the car and study how to put a pan gasket off and on , its easy but it takes time and patience. the transmission is the weakness in these models of cars. dont drive it untill you put more fluid in it or take it into a tranny shop if your unsure.
jm

Posted on Nov 06, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 412 Answers

SOURCE: i have a 2001 chrysler concorde. the trouble codes

I RECOMMEND REPLACING THE OUTPUT SPEED SENSOR..ABOUT 40 BUCKS..WILL CAUSE THESE OTHER FAULT CODES AS WELL

Posted on Aug 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chrysler 200 2013 62te transmission with 3.6 V6 P0729 code and nothing else. Replaced oil/filter 2X and solenoid pack. All looks good. What is wrong?


code p 0729 refers to gear 6 --incorrect ratio===causes ---fluid level---wiring---TR( transmission ratio) sensor /switch---shift solenoids---transmission mechanical fault
the box is operational so no need for mechanical failure to figure in the diagnosis
if you never use 6th gear, it is possible that the solenoid may be a bit rust inside or a wire has failed from corrosion
at this point I would be checking wiring , connections and pins are not corroded and then consider the TR sensor / switch replacement

Apr 30, 2017 | Chrysler Cars & Trucks

1 Answer

I have a 2000 tiburon has loss of power an the codes are p0141 po455 po303 p0732 p0734 how do i fix please


P0141 o2 sensor heater circuit malfunction bank 1 sensor 2
po455 evaporative emission control system leak Gross leak
po303 misfire cylinder three
p0732 gear two incorrect ratio
p0734 gear 4 incorrect ratio

Feb 08, 2017 | Hyundai Motor 2000 Tiburon

1 Answer

I have a 2002 kia rio and my check engine light came on the dianost said the problem was 4th gear incorrect ratio! What does that mean?


The purpose of the automatic transmission is to match the engine's optimum power and torque characteristics to the driver's desired rate of acceleration and speed by auto-selecting different gear ratios or 'speeds' to power the wheels.

Jan 19, 2015 | 2002 Kia Rio

1 Answer

My 2000 hyundai elantra is automatic it has a code p0734. which the mechanic explained me that i have to get the speen sensor replace and get new clutch because the 4 gear ratio is bad. pls advice what 2...


P0734=A/T 4th gear incorrect ratio. This has nothing to do with the speed sensor. If the speed sensor was faulty, it would also set OTHER gear incorrect ratio codes. My experience tells me the 4th gear incorrect ration indicates the torque converter clutch (TCC) is slipping and nothing more. Unless there was a speed sensor DTC (Diagnostic Trouble Code), the sensor is not the issue (yet). The fact P0734 was set (trust the computer), the TCC is slipping (out of range). Question: Maintenance history may indicate the wrong transmission fluid may have been introduced. Hyundai's Transmission fluid is strictly SPIII... there is no substitute. The incorrect fluid will cause 4th gear slippage. Now, having said that, it doesn't mean the 4th gear (lock-up) clutch isn't worn out. Have a qualified/certified Hyundai Service Technician properly diagnose this issue.

Sep 08, 2011 | 2000 Hyundai Elantra

1 Answer

What do the following codes mean: P0734,P0732,P0715, and P0731. this is the order they came up in the scanner..all I can find is that they are generic codes. Should I be worried I was able to clear my...


P0715 Input/Turbine Speed Sensor Circuit Malfunction
P0731 Gear I Incorrect ratio
P0732 Gear 2 Incorrect ratio
P0734 Gear 4 Incorrect ratio
It seems like you were having an issue with your transmission but if you cleared your light and it has stayed off I would just keep a close eye on it.

Jun 10, 2010 | 2000 Dodge Durango

3 Answers

My check engine light came on and i pulled the code po732. what does it mean?i have a 2007 chrysler pacifica awd. I'm lost can't find a manual


Most part places will have manual's.

Code - P0732 - Gear 2 incorrect ratio.
Transmission problem. Could be a sensor, I would reset computer see if it come's back, if it does have it check out could cause major damage if not taken care of.

Feb 03, 2010 | 2007 Chrysler Pacifica FWD New Cars

1 Answer

'99 Concorde won't shift into third. It kind of jerks when it hits second or downshifts into first. Check engine light is on. OBD codes are: P0734,P0731,P0733,P0700


all the codes listed above are saying incorrect ratio for each gear,you should take this to a dealer he can determine which faulty sensor on the transmission is causing this,it is not a internal transmission problem

Dec 24, 2009 | 1999 Chrysler Concorde

1 Answer

I have a 2001 chrysler concorde. the trouble codes


I RECOMMEND REPLACING THE OUTPUT SPEED SENSOR..ABOUT 40 BUCKS..WILL CAUSE THESE OTHER FAULT CODES AS WELL

Aug 30, 2009 | 2001 Chrysler Concorde

1 Answer

Engine light on code p0732, p1782, p1787 and p0700 twice


P0732 Gear 2 Incorrect ratio
P1782 P/ES Circuit Out Of Self Test Range
P1787 2-1 Downshift Error
P0700 Transmission Control System (MIL Request) Malfunction

Here is the deal, u have some serious transmission related faults, in order to sort this out u will need to take this to the dealer, allot of testing is required to get to the bottom of this, if I had to guess I would say the trans is going to have to be overhauled.

Mar 19, 2009 | 2001 Chrysler Concorde

1 Answer

What is wrong??


HI....
I read your problem.
Here is some information about you problem.
2000 Chrysler cocorde. has a 42LE transmission.

The code P0700, Will set for an internal Trans. controler fault detected. "" For any fault detected on a trans. this is the first code to set. After come the other ones.
If it come alone, you will need to make some test to determinate
If the TCM ( Transmission controler module) is fault.

P0731- Will set if ratio of input RPM to output RPM does not
match current gear ratio.
one of the commom problem of this code is a Trans. slipping condition. or other trans. codes related.

If you can go to a Trans. specialist for a proper diagnostic and possibles solutions.

THank you I hope this information work for you.

Jul 12, 2008 | 2000 Chrysler Concorde

Not finding what you are looking for?
2000 Chrysler Concorde Logo

169 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...