1996 Audi A6 Logo

Related Topics:

Posted on Nov 06, 2010

How to installed a timing belt, i have a audi a6 quattro 1996, and i pull out the timing belt just to put a new termostat, now i dont know how to put a time the crank shaff and cams shaff. and if i need to have a special tools to do it.

5 Related Answers

Anonymous

  • 1586 Answers
  • Posted on Jul 22, 2008

SOURCE: Audi A6 Misfires

You may have a coil pack going bad. They're on the front top of the engine - you'll see them if you follow the spark plug wires back. Do you have any codes from having the engine scanned? If you can get it scanned (AutoZone will do it free), post the codes up and we'll see which cylinder(s) are misfiring. From there, you can swap coilpacks around and see whether the misfires follow the packs or stay in the original cylinders. If they move, you have a bad coil pack or two. If they don't, since you've already changed plugs and wires, I'd see about having the injectors diagnosed to see if any of them are failing.

Ad

agrundy

  • 25 Answers
  • Posted on Mar 19, 2009

SOURCE: engine audi a6 1999

HI,AT WHAT SPEED DID THIS HAPPEN,IF AT IDLE OR VERY LOW SPEED,HAVE A NEW BELT FITTED IF IT RUNS NORMALLY YOU ARE LUCKY,IF IT RUN ROUGH WITH BAD MISFIRE OR NOT STARTING AT ALL THE VALVES ARE BENT,PLEASE LET ME KNOW,ANDY.

Anonymous

  • 1 Answer
  • Posted on May 07, 2009

SOURCE: how do i change time on clock on 2005 audi a6 quattro s line

I think I can help you. I just did this on mine yesterday because my clock runs a few minutes fast each month. It was somewhere bizarre - sorry I'm not near the car to be more clear. I think I picked Sound, Settings and for some odd reason, it was there, rather than in Car, Settings. NOOO - it was in Tuning - click the AM/FM button, then Settings. I've only had it for a few months, but you'd think I'd have that one figured out due to re-setting it.

-maria

Anonymous

  • 1 Answer
  • Posted on Jul 17, 2009

SOURCE: In my 1999 Audi A6 Quattro the BATTERY Went out

hi i have a 2002 Audi A6 Quatro turbo and wanted to know where is the alternator located and is it easy to take out and replace it.

Anonymous

  • 103 Answers
  • Posted on Jul 27, 2009

SOURCE: What type of oil does my 2005 A6 Audi 3.2 Quattro use?

it doesn't matter what brand you use, just make sure you use the motor weight on the cap (don't use Pennzoil)

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Timing belt 1995 Audi A6 Quattro Sedan (4A2) V6-2.8L (AAH)

Timing belt routing diagram for 1995 Audi A6 Quattro Sedan (4A2) V6-2.8L (AAH)

I can not insert the picture here because bad page. Send me your e-mail address, and I will send you back the picture.
0helpful
1answer

Can't find where to put the freon in my Audi 96 A6 quattro?

1996 Audi A6 Quattro

Note:
Only a high pressure service valve is used for A/C system servicing. A low pressure service valve is not installed. Perform all A/C system service (ie. discharging, evacuating and charging) through the high pressure service valve only.

tdisline_829.jpg
0helpful
1answer

Can someone please provide the timing diagram specifications for 2004 Audi A6 Quattro, 3.0?

The timing belt diagram for 2004 Audi A6 Quattro, 3.0
See pictures below:

fb86e73.jpg
f99bed4.jpg
102a024.jpg
3e5a479.jpg
2279505.jpg
bedb6d5.jpg
630d7b2.jpg
e0885db.jpg
706fdfe.jpg
1b6f1c0.jpg
d39492d.jpg
c3e0e04.jpg
a86c76e.jpg
cb764d8.jpg
7e7540d.jpg
2d54d5d.jpg
0helpful
1answer

Heater will not turn down or off

put a clamp on the heater hoses ,expensive repair i think ,,possible climatic control computer
0helpful
1answer

Will These Spark Plug Wires Work for My Audi?

No. I would go with the cheaper set.
1helpful
1answer

Engine audi a6 1999

HI,AT WHAT SPEED DID THIS HAPPEN,IF AT IDLE OR VERY LOW SPEED,HAVE A NEW BELT FITTED IF IT RUNS NORMALLY YOU ARE LUCKY,IF IT RUN ROUGH WITH BAD MISFIRE OR NOT STARTING AT ALL THE VALVES ARE BENT,PLEASE LET ME KNOW,ANDY.
0helpful
1answer

1996 a6 quattro wagon rear wiper not working

honestly dont know never taken one off ,should imagine their would be some screws somewhwere around the handle and then plastic studs underneath the panel which you pry out with a nice wide flat screwdriver ,but be prepared for the mastic **** holding panel down
Not finding what you are looking for?

80 views

Ask a Question

Usually answered in minutes!

Top Audi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...