Question about 1996 Oldsmobile 88

1 Answer

Where is the water pump located at on a 1996 olds88LS i put water in the radiator and standing on the passanger side i can see it coming down in a study stream from under neath the car but not from the radiator.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,190 Answers

Hello: The waterpump is on the passenger side of engine. Either the heater hoses are leaking or the waterpmp shaft seals or the radiator hose that attaches to the waterpump. The waterpump is located about in the center, its pulley does not have groves and the pulley is held on the waterpump with 4 10mm bolts.

Posted on Nov 06, 2010

Testimonial: "THANK YOU, I WILL CHECK WHEN I GET HOME, HOPEFULLY ITS SOMETHING EASY LIKE REPLACING A HOSE BELOW,, THANKS AGAIN"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the auxiliary water pump located


If you are standing in front of the car, and looking down between the back of the radiator and the front of the engine, the auxiliary water pump will be on the bottom left corner of the back of the radiator.
section-3vwu3ae5e2puwsyokhqp0oyp-4-0.jpg

Sep 29, 2016 | 2008 Cadillac CTS 3.6L

1 Answer

Passanger floorboard is wet


Is it water or is it radiator fluid. Radiator fluid will have a sweet smell. If it is water it is probably because the windshield isn't sealed properly and is leaking. If it is radiator fluid then you have a cracked heater core. You can see the result of this by turning on the front defrost and instead of clearing the windsheild it will fog it up. Try pulling the carpet back on the passenger side and put a light dusting of flour on the floor. This should help you locate where the leak is coming from.

Jan 31, 2013 | 2006 Chevrolet Impala

1 Answer

Need to locate and replace the water pump on 1997 nissan sentra.


The water pump is located on the passanger side of the engine. Look right below the timing chain cover and there is a pully and belt on the water pump. You will have to remove the water pump and thermostate together then seperate them after you get them off the car. I would recommend replacing the thermostate also (cheap fix). You will have to remove the belt and pully before you can remove the water pump. Hope this helps....

Jan 05, 2013 | 1997 Nissan Sentra

1 Answer

My 1996 corvette lt1 will overheat while standing,fan does not come on,i have to put on a/c and both fans come on and car cools down to normal.i checked fusesand replaced,thermostat cooling sensor,temt...


U have an electrical issue. If water pump was failing then how in god's creation could the two fans cool the engine down? Check out the circuitry that controls the normal fan operation and you will take care of the issue. Till you find the problem just hot wire the fan motor with an on/off switch.

Jun 22, 2011 | 1996 Chevrolet Corvette

1 Answer

I need to know where the water pump is located on my 2003 chevy venture van


with the hood open standing on the passenger side of the car looking at the motor the water pump is behind the center most pulley on the front of the motor.

Apr 08, 2011 | 2003 Chevrolet Venture Passanger

2 Answers

I can't find the thermostat on my 1996 jetta gls


On 1996 VW JETTA,The thermostat is located at the engine end of the lower radiator hose (passenger side). If the car has power-steering, then power steering pump and mounting bracket are to be removed to get to the thermostat housing. The thermostat is at the end of the bottom hose, in the water pump housing. Follow the lower radiator hose to the water pump housing. There are three bolts that are very difficult to navigate around. The thermostat is located behind those bolts.
----------------- Thank you.

Jan 31, 2011 | 1996 Volkswagen Jetta

1 Answer

Where is the water pump located on a 2000 Saturn


Standing on the passenger side of the car with the hood open looking down into the engine bay you will see the serpentine belt. If you have air conditioning, look directly below the air compressor pulley, the next one down is the water pump. Another easy way to find it is to find the lower radiator hose (again on the passenger side of the engine) and follow it to the engine block, the pulley where the hose meets the block is the water pump (not the pulley, but what the pulley spins is the pump).

Jan 17, 2010 | 2000 Saturn SL

1 Answer

1996 honda accord leaking yellow fluid


Is it greenish yellow? Determine the location of the leak to find your problem. Could be: weep hole on the water pump, hose to and from heater core, radiator, one of two large radiator hoses, faulty radiator cap, cracked reservoir. If it's the water pump it will be near your belt(s) area on the driver's side of the motor.

Dec 09, 2009 | 1996 Honda Accord

1 Answer

Remove and replace waterpump 1995 3.1 V6


3.1 V6's are not hard to do. If you stand infront of the car on the passanger side follow bottom radiator hose that is the water pump. There are 4 or 5 bolts holding the pully on do not take belt off yet. Break looses the bolt's first. Pull the pully off there will be at least 4 bolts holding the housing on remove them you will loose about a glass of water. Pull the old water pump out and put new one in make sure you use blue silicone or something similar for water put silicone on water pump make sure holes line up on the gasket when you put it on the pump let sit for 5 min. put silicone on other side of gasket put it right one don't let site reassemble everything and your good to go.

Jul 30, 2008 | Chevrolet Corsica Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

264 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...